Added: 2 years ago
From: cutlerylover
Views: 42,561
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (184)

Sign In or Sign Up now to post a comment!
  • man i just shoved the Awl (where the lanyard loops is on the Surge) through my pinky lmao, hurts so bad, but hey, i got the piece out!

  • i edc my wave every day for along time and i never knew about this shit

  • just found out is on the surge too :D

    thanks for the vid!

  • After a full year of beimg my companion as a part of my turn out gear. I've discovered something new on my Wave! Thank you very much.

  • lol... i didn't even know my wave has a saw... no wait... 2!! :D :D

    just bought it today.. very nice... THANKS! :D

  • nice!!!!

  • thanks

    

  • mine doesn't come out/pop out as much as yours does

  • haha pimple popper :P

  • Thank you! Saw it listed in the manual but could not for the life of me figure how to get it out. Thanks for the instructions.

  • only for wave 2004 & later

  • Hey, I only noticed the lanyard ring because my saw doesnt close properly if the lanyard ring is inside the leatherman, it gets stuck at the lanyard ring. I have to push up the saw a bit, so that it gets on top of the ring. You didnt have the same problem?

  • @schidin Lol, i found mine because the saw was touching this thing. I googled to see if others had this problem, and found out it was actually a tool.

  • WTF??? I've had mine for 2 years and had no idea about this either! I have one question though. Why do they tell you that you can "buy" another lanyard ring for $10 to put in the empty slot on the other end by the file.. makes absolutely no sense if it already has this!

  • Wow... I actually did NOT know about this... THANKS!

    Granted, I'll never use it... haha

  • sweeet the surge has one to thank man

  • wats the best mt?

    

  • @themighty1899 Leatherman charge ALx or TTi

  • @FRAGjornie ol wat u mean i dont kno all names or abreviations of mts

  • if you look closey this video skips from 4:11 to 4:13

  • it says it right in the manual..

  • I have tti for more than 18 months and I had no idea of this.

    Always learning

  • Thnx man. :)

  • I just learned something of my new charge tti, but the edge on mine is sharp! and will through rubbing cut through a lanyard. I got my charge with a lanyard ring, pocket clip, bit extender, and extra bits, with free shipping for $116.00

  • thx

  • how was this short?

    you could sum this video up in 20 seconds

  • my leatherman wave doesn't have that....but it is really old. probably one of the first.

  • sweet, didn't even notice it was there. thank you for shareing

  • how do you adjust a tightness on pvt point ? I think I got the tight one especially the main blade, it does not come out smooth like on the other side attachments. (In this video, you can pup out blades and saw with one finger easy).

  • Did u ever get the charge tti I just ordered one with cabelas painted one n if u got one will u make a vid on it

  • man, I read the manual and saw where this thing was located, but I couldn't ever figure out how to get this thing out. I tried and tried. I just said screw it and got the pocket clip attachment. Thanks for the video, I'm gonna try it out right now.

  • I just Goya leatherman charge ti form eBay n I only had to pay $12.67 with shipping n came with sheath along with a wave special edition from their 25 annvers

  • Hey, would it be possible to take the tool apart and flip the blades for lefty use?

  • @zanuha its probably possible, i just got a new one today after using an older model for years, im also lefty and never had any problems, but it would make the tool more convenient

  • wow...i cant believe i found this thing in the street

    SO GLAD I PICKED IT UP!!

  • note this is not on the original wave

  • i just got my leatherman wave back from the factory. i sent my wave to be repaired. they are awesome they fixed it at no cost got it back in 3 days. 25 year warranty. i love my wave.

  • On eßay the Wave is like $44 with a litle flashlight.

  • Wave or Super Tool 300?

  • @MFC723

    Personally, I would say the Wave. The super tool is nice if you are going to mostly use the pliers. It has the best pliers of any of leathermans tools and it has removable/replacable wire cutters. However, the wave has a bit holder and you can buy the set which includes like 40 bits plus the blades, saw, and file are accessible from the outside without the hassle of opening the tool everytime.

  • I was gonna get a leatherman but ended up with the gerber suspension. Hasn't let me down yet.

  • Today, I picked up a Wave.

    Then, I learned there is a lanyard ring.

    And...

    Now, I know how to use it.

    Thanks,

    Always enjoy the channel

  • yeah. truly what is the point of having a lanyard attachment if theres already one built in. you know the one like the pocket clip, i feel they should have just had a knife like pocket clip. like a spyderco with screws., btw with the charge tti, and all leathermans like it. the pocket clip BLOWS.

  • thia agaa6425 i like to know were did you get your leatherman wave lethershield ? please let me know.

  • пиздец! он таки нашёл крепление для темляка! Поздравляю! Целых 5 минут видео выложил даже. повеселил, родной.

  • charge tti too

  • Nice!

  • COOOL

  • Flippin awsome man! thanks for showing me that. I was considering getting the quick clip lanyard, i will use it. Thanks again.

  • Comment removed

  • My Leatherman Charge got this as well.

  • That is freaking cool! I had no idea that was there. I probably wont use it since I carry mine in a sheath but thanks.

  • my knife is slightly loose, is there a way i can tighten it?

  • I can not decide to get WAVE, CHARGE, or SURGE.....

  • @urkingod im in the same dilemma.

  • use the product finder feature on leathermans website,that will help you decide.

  • @urkingod wave

  • @urkingod i'd go for a wave m8,

    as far as i'm concerned its the best one for the price it is

  • so cant wait till i get the leaterman wave

  • Hey dude thanx heaps... i bought the charge tti, and its on that as well...

  • Cool, I found one on my Charge. Thanks for the tip.

  • that is where mine is on the Fuse on the side with the blade and chisles

  • Thanks.I was wondering were to put a lanyard.keep the videos coming.

  • Thanks . I found one on mySURGE.

  • wow i saw that little thing but thanks cause i know what it is for now

  • The same hidden lanyard hole is also available on the Charge TTi.

  • i dont understand, what am i spouse to do with this ring?

  • you put a lanyard on it so you can pull it out of the sheath easeir

  • thank you for the explanation...

    whats a:

    lanyard?

    sheath?

    haha, sorry :P

  • a lanyard is a strand of paracord (a type of rope like material) braided in designes

    a sheat is a leather or nylon pocket for the tool it is shown at the beggining its the black thing

    i hope i helped and your welcome ☺☻

  • BipChannel you're an idiot.

  • @ZeroToreranceKnives Shut up dude he has more fans reinds and subscribers than you and does not go around calling people idiots your the idiot.

  • i`ve got a alx it has got the same feature (guess it`s the same about the al) :-) and thanks i thught something was wrong with my tool

  • dude i wish i still had mine i lost it a year ago but i didnt know about that either thanks...

  • the original wave does not have this feature

  • It's mentioned in manual!!

  • holy shit, thats really clever, kudos to the person who engineered it

  • i didnt have a clue that was on the wave .. thanks

  • how do you find this stuff?

  • The charge tti has this aswell lol i just checked mine!

  • yah the first gen waves don't have that lanyard hole. the first gen is in with the philips screw driver

  • Jeff: I have a first generation Wave and it doesn't have the lanyard attachment under the saw. I wonder when Leatherman added it?

  • I made a comment about the lanyard ring in your original Wave video 4 months ago :P

  • found the lanyard thing long ago these are really cool knives though. and with just a little bit of stone sharpening they are real sharp as well

  • Haha! Thanks, I just found this out

  • leatherman surge has it too, its in the instructions

  • what is the blade on the wave?

  • Letherman Charge got it to...

  • cutlerylover, i comment you that in your Multitools : Leatherman Original and Leatherman Wave Video like 2 weeks ago.

  • Theres also a fold out one on the Kick and Blast.

  • Ha... neat little trick! I admit that I didn't read my TTi's manual, so I didn't know about the lanyard ring. The only problem is, it's on the wrong end of the tool. I find that if I sheathe the tool with the lanyard ring(s) facing up, the exposed blade shoulders catch on the elastic and tear it up. I have a small light in the side pouch of my sheath, so that doesn't help. But it would be nice...

    Keep up the good work! I enjoy your videos.

  • COOL

  • Dude, thanks! I'm gonna do this as soon as i get home...

  • Comment removed

  • i mean charge

  • its on my clutch to

  • i still say the needle hole in the swiss army knife was a better find haha

  • I just checked my Charge TTi, and it has that same lanyard loop under the saw. Cool find!

    I love the Charge TTi, great all around tool. I don't know if I would really recommend the clip for it though. I found that it weighed my pocket down too much, and I'm a fan of solid steel handle knives. So I stick with the nylon sheath.

  • My wave is like 11 years old ( still says patent pending on the side) and my lantard loop is tiny compared to that one

  • i luv knives i need one of them

  • Nice! I didnt know that! Thanks

  • charge tti has the same thing.

  • pretty cool

  • omg i did it to mine thanks

  • That's awesome!! Never knew it was there!

  • dude!!! thats one of the coolest things ever! i just did it on my wave

  • 5/5m8

  • And the charge tti also comes with a pocket clip.

  • Dude, that's awesome. Thanks for the info.

  • ha cool i didnt know that

  • TTi is the shit!

  • I've got the TTi and it's got the same ring, i realy hope you get one 'cos it's AWSOME XD...

  • I have an ALX and it also has it LOL

    Great vid

  • I saw it when i was looking at it when i got it, i tried to get it out (new stil stiff) and i cut my finger badly....

  • A warning regarding the Leatherman Wave/Charge pocket clip, Jeff.

    They are very fragile. Instead of just bending out when you catch it on something, they just seem to snap in half.

    I've gone through 2 and decided not to replace them anymore and just use the belt sheath.

  • I removed my lanyard ring so I can use both the clip and the detachable lanyard ring at the same time

  • thats pretty cool....thanks cutlerlover

  • great vid i myself own the leatherman surge and i have to say its great and i use it every day in the line of work that i do and i beat the crap out of it and it keeps askin for more its a great tool

  • I've got a Surge too and a Wave. I like them both, but I have to say for some reason the Wave is made better than the Surge. My Surge rattles and sticks and isn't that smooth. I've even had it replaced before by Leatherman and it still isn't very good fit and finish. I still like it though.

  • lol, first the strait pin on the on the Victorinox Swiss Army knives, now the lanyard piece on the Wave...

    xD

  • I lost my leatherman blast =(

  • I'm hopefully getting the surge soon.

  • People always say messenged.

    With an N.

    There's no N.

  • I care.

  • wtf? cutlery lover is most certainley NOT! a little bitch

  • there;s one on the Leatherman Surge too in the same spot.

  • cool. my surge has it also.

  • Charge models have the same feature

  • Great video thanks for the info

  • Don't blow up on my guys, but I don't understand how you guys can have these tools and not know the little things like this. I found it the firstday I had a wave. And as for the Charge TTi Jeff, You will really like it. I finally bought one several weeks ago and it's great. Like you said, the wave, only better.

  • i agree, I assume that he just bought it before checking out information on his planned purchase.

  • my charge tti has it too.. I never knew lol.. thanks cutlerylover!

  • Five Stars!

  • i figured it out first tho its in my review 2

  • I found this out when the tip of my saw kept hitting the lanyard ring when I closed it :(.

  • Thanks!

    I've been trying to get the thing out for the year I've had it!

    I emailed Leaetherman, they actually told me I had to not push it down, but bring it out.

    ...Yeah, misinformed.

  • gah the wave looks sweet...im gonna get one when i have the cash flow.

  • duane myers account is closed what happened

  • If anybody knows somewthing please let everybody know , does he has a new account?

  • hes makin one now...

    thats wat i heard.........

  • it was deleted for copyright infrigment..

    but i heard hes making a new account!!!

  • Oh... It swivels. I knew about the lanyard ring but I didn't know it swiveled like that.

    Thanks.

  • Wait, mine doesn't swivel it just comes out. I guess that's how the one on the surge is.

  • haha cool, i didn't know that either, i checked my charge tti and it had one, awesome, don't have to worry about losing it now.

  • I learned about this feature a couple days after i got my wave. I was wondering what the saw kept hitting and i noticed a little metal piece so i started to move it with a screwdriver, and then i was wondering what it was so i read the instructions. Personally i don't think that having a lanyard on a wave is very practical because the wave weighs so much.

  • i don't think ill use it, but it's kinda cool to have

  • wow i check my charge al and it has it to

  • i would suggest not getting the clip. had one for my xti. used it for less than a month, and the clip snapped right in half. aside from that the tool was way too heavy for being carried in that manner.

  • Cool, I got the leatherman YESTERDAY and cutlerlylover finds this :P

  • actually...it was me...

  • actually, no, cutlerylover made this video, sorry.

  • no i mean it literally was me i deleted the account "vishal19800"

    it had copyright infringement and this is my new account i will make a video proving that it is me.

  • Who's youtube account is this?

    Cutlerlylover.

    His video, stop taking credit. I don't care if you made a video before he did, I'm talking about THIS SPECIFIC VIDEO.

  • oh no, i didnt mean i stole it from him.

    i meant i sent him a private video titled

    "sweet awesome amazing leatherman wave secret!!!"

    sorry if i like..pissed u off or whatever..

  • your one of the few VERY knowledgeable people on youtube who will admit they dont know it all. Great vid 5/5

  • Thanks but no one knows it all...some just cant admit it, lol..were only human and we all make mistake and have room to learn...

  • would you recommend buying knives off of Budk? because i have found some pretty neat knives and i want to know if the website is good or not.

  • thers not much there I wodul actualy use, but when Iw as younger I ordfered from them frequently for their cheap cool styuff, but its mosty for decoration/collection/show off stuff, haha

  • nice

  • Good videos. They also work great for getting out of handcuffs (with a key or bobby).

  • awesome video jeff. i love these "hidden" things

  • i knew that was there i just didnt know how to take it out so thanks

  • I will likely never use this, but it's good to know it's there. Thanks Jeff (and random person who showed him.)

  • ur welcome! lol

  • I have the same thing on my Charge Ti, didn't know it until now..thanks.

  • great vid im planning on getting one

  • thanks jeff. love the vids. keep it up mate!

  • cool vid bro

  • nvm got it out

  • wo w

  • ive always wondered how to get that out. but mine wont come out

  • Wow, that's real cool since its so hidden and all. :D