John Deere 4020 Wheelie Show Manfred Dirnbacher (just show)

[DODGECHARGERlover]

my dad doesnt allow me to do this :)

[onefastdart]

If he didn't have weights, he could have taken a couple of boards/ blades off the plow.

[mfranzusan3014]

pfft... weights. they make a right and left brake for a reason!

[MrCattleFarmer1]

Fill it with fuel Deere put the fuel tank in the front for a reason . 30 gal of fuel is another 240lbs. then add some cast wts. Wefarm clay hills and have broke splndles off a 4630 befor plowing (NOT INTENSUNALY) not to mension thats a good way to flip a tractor and kill your self!

[firefighter31256]

ever heard of sumtin called weights?

[Bo94DK]

this is actually a good thing so he can show you guys what those tractor can tolerate

those tractors do not derserve to be polished all day long they have do some hard work from time to time

[penderco1]

Front end would stay down if he had counter weight up front and would pull better too!!!!!!!!!!

[devonte3062]

this makes a song come into mind....... keep what you got till you get what you need

[8310jd]

JD POWER

[jwilliams2612]

That's a good way to get killed.

[5010Deere]

Obviously doing it for fun! I own a jd 5010 and 5020 it takes quite a load to make them even lift an inch off the ground! Bravo! Guys, even a two year old would know that there should be front weights on this beast, but he's doing it for fun, so lay off the guy. Maybe he can post a vid about him splitting the tractor and replacing the clutch like I did to my 5010!

[LITTLEREBEL55]

were the front weights on it



[carlk20]

thats safe...

[ushouldntjudgeme]

It is frustrating to plow with a 4020 that wants to do this We have 2 -4020's, both have front weights, yet both did wheelies just as this one does....Upgraded to a 4430 for plowing, it has 1000 lbs of weight on the front, never any wheelies with that tractor. Perhaps it's the way the tractor is set up? but we no-till mostly now, but remember the long, tireless hours of plowing.

[cmkuester13]

and that's how you ruin a perfectly good tractor

[gerkchen]

john deere power =)

[theffa1928]

somebody really needs some front weights!

[Brad81188]

somebody doesn't know how to set a plow up right

[383chevystroker]

thats hard on stuff

[Jerald9000]

Your a stupid mutha fucka you know that? You just dont relize that centerpiece WILL snap under pressure and that tractor WILL flip back and kill your ass, Ive seen know 2 guys to die doing that same shit your doing, id never even attempt that shit with my 4020.

[ristomejode0]

Este tractor tiene huevos

[kisfurikah]

lol

[Machi74005]

Needs a rack of weights across the front.

[MrStraccio]

very nice you  liked my video ?

[2907120]

he didnt stall it cause he was on the footfeed by the brakes. hes an idiot if u ask me, great way to snap a front axle by dropping all that weight on it. like the other guy said, they make weights for the front to counterbalance the tractor so you can put the power to the ground.

[wladek291]

super manfred wladek PL

[supermacs1]

trade it in for a JD4955 it stuck its two fingers at me!!!! boy can it work.

[1936johndeerea]

you know when you plow the idea is to keep the front tires on the ground ive plowed with a John deere 70 with a wide front end and its my tractor and ive plowed with a john deere a i know the idea of plowing is not trying to impress a camera it is to do the job right

[wuscli]

Good job. I know it was just for show. Who could hold it on a wheel stand and not stall it lol.

[jake92sc]

id rather have a case ih=) im only 14 now but if i ever have a farm its gonna be case and massey all day long!

[milkman4282000]

here in indiana we call that full bore farming!!!

[460gman]

@milkman4282000 in greene county indiana it

reminds me of dad's ih 706 back in 64,, front end wanted to fly

[4020Jakes]

Use some fucking weights or get a smaller plow fuck

[tvesbach]

u must be a tractor puller u even got bfg's

[mac1172000]

You know front weights work wonders What  an idiot

[2LateIWon]

and IT'S A FULL PULL!!!!! ☺☺☺

[humpymedumpi]

Only This Week. Free Tractor Manuals to Download - ** tractorrepairmanual (dot) com **

[r0cketalac]

jesus, you're gonna break your tractor in half -.-'

[1936johndeerea]

That's a pretty good front axle

[4020kid]

WHOA--RIDE"EM COWBOY!!

[stan420ok]

The tittle should be how to burn out your clutch and fuck up a good tractor.

[tobz44]

Brilliant video!!!! think some weights are in need order!!the 4020 is a brilliant tractor got 2 at home!!! need to get them running again!! nice work!!

[thequietrebel420]

RAISE THE PLOW JACKASS........

[beckmanb72]

Damn kids!!

[peterbiltforlife]

idiot.... use a lower gear and/or some weights dumbass

[19mg94]

wait till u break the front end

[farmerswartz]

I would give anything to farm with a 4020 but i cant afford one so im stuck with a 3010. It just pisses me off jackasses get to screw around and tear one up when i cant even afford one to make a living

[ryguy4450]

your a fagget get some weights if you cant afford it you shouldnt be farming

[thegreenerthemeaner]

Look @ the front tires turned against the furrow...either the draft line has been misadjusted or he is too deep. I say both if u look he turns to console and looks like he adjust the lift arms only to see it raise the front end. You r doing this on purpose here bub. Think about the oil running to the back of the pan away from the oil pump. Payday takes 3 minutes around my place for this kind of operator...that's how long it takes to write his last paycheck and send him down the road!!

[Brad81188]

ever heard of weights?? people like you shouldnt be on pieces of machinery like that. a tractor that valueable doesnt need a operator like that either.

[waults]

Thing about a 4020, it's still a viable working tractor - small time farmers have to use what they can afford and a newer $100k tractor would not make sense. Weights are expensive too. That clay hill he's trying to plow might be the only part of the farm the front gets light on. Give the guy a break! There are about 3 places on my farm the front of our 4320 comes up, am I going to buy $2k worth of weights or just be carefull when I plow those areas?

[jsnsctt85]

i remember riding on my dad's when it would do that. so fun. but it can tear one up pretty fast if you're just playing around. You should really slow down a lil, put some weights on there, or raise the attachment a lil. but still..cool that u got this on camera

[shaunbaker04]

the funniest part is that he is turning the steering wheel when the front wheels aren't even on the ground. Shows how much of a brain he has in his head. Eh?

[hondaman200s]

godawm what an idiot those poor old tractors like that are out there are getting the shit kicked out of them by dumbass people like that. RETARDED!!!!!!!

[Magnum9250]

typisch manfred, wer sonst!

[farmerben4010]

your a idiot im gonna laugh my ass off when you snap the front axle too much weight your pullin

[JAROSLAVAGINA]

lol i'm gunna cry... that's a pretty one there

[dallas67560]

you need wieghts for the front and calcium for the rear tires so they wont dig down... my dad has calcium in the rear tires on his 4020

[f243cubloboy]

god damn dont work the tractor that hard. put some weights on the front dumb ass

[sornbergerfarms]

Stupid austrians all you can accomplish with that is breaking shit

[ktmfreek]

93deere, 19dcs93, conutryoy,82dodgeram440 you are fags

[trucker43haz]

dumb

[7betz]

prob dropping it too deep and no weights and no duals u prob just trying to do Wheelie

[jtklonzy]

wow..if i saw you doint that i fire your ass!!!! not very smart man.

[woodyate]

that sombich is powerful, good controled wheelie, you scared a lot of people, you gota know hang some Iron on it & gear it down

[norfolkdash9]

Yeah man just take it slow and easy, rushing is not going to make it better, but weights on the front sure in the hell would.

[TheJdbman]

good showmanship. hard on equipment though.

[93deere]

wheres the weights at u dumb son of a bitch

[19dcs93]

your a fucking idiot

[conutryboy]

take that tractor out of high gear and slow it down

[82dodgeram440]

take the stupid 1971 off the front and put some weigths on the front

[killthebums]

@82dodgeram440 he was probobly thinking number plate or weights? NUMBER PLATE!

[ushouldntjudgeme]

@82dodgeram440 Dude, things were "heavy" in 1972, man......far out....peace brother ( j/k)

[brlethecrv234]

@82dodgeram440 he is doing it on purpose, with back end hidraulics

[4020684484]

#1. You need Weights!!

#2. You are going to fast so you are going to have wheelies! your so worried about finishing fast but u might not finish at all like that!

[markendmark]

idzie jak moja trzydziestka w 4 skibowym obracanym

[pwalpar]

come on dude, get some counter weights duhhhhhhhhhhh

[caseman2294]

No kidding Weights??

[digzie1]

thats what"WEIGHTS" are for,he will crap his shorts if that thing snaps an axle while the front is skyward bound!

[Orgeltrecker]

lol

[pard75]

Your from Austria? Why can't you tear up a Massey or some AGCO tractor? Why must you destroy an American made John Deere? You are unworthy of such a tractor.

[gasslhatza]

yes, i am. it´s not my tractor and if it would be mine, i wouldn´t do this any time.

i´m driving an austrian tractor...STEYR =)

look at my videos to the first ones, then you can see the tractor at work.

[pard75]

But why would you do this to a tractor that belongs to you or not? None the less what you are doing here is hard on any tractor.

[Bowtiesare4lilboys]

@gasslhatza american tractors are better u can destroy all them austrian tractors all u want, john deere and IH best tractors in the world period

[dieselrosske]

if a john deere goes stuck from that. its nothing worth.

[TheTractormaster]

@pard75

massey aintcrap neither is agco but yeah he shouldent dsetroy such a good pice of machinery

[Cassiiir]

@pard75

oh man you are such a pussy..... if this JD can´t handle such things, it´s ready for the junk yard!!!!

Are these JD really such crap, that they can´t handle such conditions...????

greetz from austria :)))

[hackhasser]

lol

[6030diesel]

you cant do that with a 4320 with a full fuel tank the tires will lift a tiny bit in a hard spot but then be barried in the dirt again and mine dont have any weights but the bad thing about the 2wd deeres is they didnt have quite enough weight in the front alone because turning with harrows you have to hammer the wheel brake to get her to turn and they were light in the back two i had a blade on the 4320 and no rear weights whenever u lifted the blade if you were pointin down hill you were stuck

[waults]

5-18" on our 4320 with 1400Lbs, can still do that in clay, but why do that to the clutch! - Not to mention the rest of the powertrain. Fun, yes, but be nice to it, they don't build 'em like that anymore!

[gasslhatza]

if this tractor would be mine, i wouldn´t do these thigs. its the "toy" of manfred and he has to know what he do. don´t worry, the john deere has a good home at manfred :-)

[6030diesel]

thats hard on the old eninge block too because it has to hold the whole front end up too and when she drops it sends a shockload though there not sayin its happened but you could rip some castings off of the engine or clutch housings

[woodman1241]

time to get some weights for the front of that beast?

[truepowerstroke]

oh dude,im going to do that right now with my 4020

[tim52160]

that is just too cool for school! Now if it was a tricycle. wonder how many bottoms and what speed he's pulling.

[ihboy1]

get a ih they r hevyer than jd

RED POWER BUDDY

[countrykid1640]

he dont have the weight in the front.

[IamStupidz]

Your an dumbass.. Heavy Tractor go in mud = stuck. Lighter More power = no stuck ;D

[gingi87]

lol...is ja geil!!nich meiner!

[MossyOak83]

damn, get some weights on the front end

[Rensiej]

he just lifts the plow up!

[rwickmannp11]

You have more power than you do front end!

[Wachbirn400]

Da dirni ^^

[4020kid]

that looks like a good time.....sharp 4020!!

 beer is good !!!

[Davidflapjacks]

still that 4020 isnt made for that kind of plowing, trust me. i just took the clutch out of my 4020 downshifting while going up a hill. and my other 4020 my hired man took the rear end out plowing

[gunidera]

How many hours had your 4020 clocked up when the clutch failed? Also how many hours had the other 4020 clocked up when its rear end failed and what part in the rearend gave out?

[nchayfarmer]

hey 10-4 lol bring it on down to the shop we will give it a new rear end and clutch i know damn well john deere or not its not good on anypart of the tractor for this kind of activity

[Davidflapjacks]

if that was me, i'd be fired from my job and be a hermit on the side of the road from ruining a beautiful 4020 like that.i own 4 4020s and a 4440 and i work on a farm

[gasslhatza]

that´s not my tractor *lol*. the driver makes that only for show and fun. he only drives with his tractor at shows and then he makes wheelies with it. but he´s a really big john deere fan, if something broke down it´s his problem.

[MJS4320]

You're tractor won't last long runnin it that way for sure. I wonder if you ever paid for parts that you broke? It gets pretty expensive. You might want to buy some weights.

[johndeeremax]

Thats a nice way to ruin a nice tractor like that one.There not made for that.That plow you are using is to big for a 4020.

[GaaraHunter101]

Man if I plowed like that my boss would go get the mottle with the no.2s and pop my ass right off the tractor.

[LiKeSaBsii]

cooles videos hehe

[Jrcaseman]

Nice video!!