Home made Cnc router mill Hobbycnc Emc2 first works!

[MrLauhol]

you should use e-chains

[Marcelobass2]

Dear Friend, Congratulations on your CNC, I am a luthier in Brazil and need to build a CNC for my studio, you can send me the project? Thanks.

[sherieefshamma]

CNC Computer Controlled Router sign making Rockler Woodworking and Hardware system Bosch power tools tool carpentry diy woodshop workshop 

[izaatmusic]

why use so many threads for your X axis?

[wiggum2009]

hi there great job but were do you get your leadscrews

cheers

[regus06]

Bonjour,

Super machine que vous avez. fabriqué. J'aimerai me lancer dans l'aventure CNC et fabriquer une machine de ce type. Si c'est une création personnelle, possédez vous des plans, la liste du matériel ainsiq qu'un mode opératoire pour la réaliser.

En vous remercicant par avance pour votre reponse.

Bonne continuation et réakisations.

[MatthieuChar]

@regus06

Bonjour, non je n'ai pas dessiné de plan, juste un croquis à la base et après j'ai continué au fur et à mesure!...

Toute l'électronique viens de chez hobbyCnc, j'ai pris le HobbyCNC PRO Driver Board Packages avec les moteurs #23-205-DS8 (vive la pub :D), il a juste fallut rajouter un tranfo.

Pour les entrainements les tiges filetées viennent de chez HPC, avec un diamètre de 16mm et un pas de 4mm et j'utilise des roulements de 25mm de diametre intérieur et 12mm d'épaisseur.

[WFSA6996]

@regus06 La société Bosch Rexroth est présente pour les vis à billes rails et chariots ! Si vous le désirez également pour l'automatisation

[NoFNclue]

Try reversing the contour cutting direction and leaves bad edge on discarded pieces, ooh and speed up feed rate!!

[MatthieuChar]

Hello, it was the first experiment and the tool was completely inadequate . It was an old mill for steel with a small cutting angle. Now I use mill for wood.

I realised blades for rc autogyro by 3d milling with a speed of 2000mm/mn for example.

[killler19900426]

do anyone need logicial of that machines kind ? i have original artcam+dsp logicial

+213775362180

just call me and we can make a deal ?

sculter digital machines( of wood)

[TheLonetreecreations]

Speed the motors up! It's cutting too slow.

[omesorg]

how did you get it so close to the board underneath without touching it at all? Do you have problems with heat?

[MatthieuChar]

I make the Z origin with a sheet of paper. The thickness is around 0.1 mm. I descent step by step (0.1mm) on the paper, the drill is stop. I move the paper with my hand and continue to descent until the paper is lock. Then I consider that the tool is under 0.2mm of the Z origin. So the drill never touch the board, and is always around 0.2 0.3mm of the board. But sometimes the tool touch it! Sorry for my English!

[pingpongme]

The cool whee-whee-whee sounds alone are worth building a cnc router.

[chevron1981]

What program do you use to control the cnc router?

[MatthieuChar]

It's Emc2, a free software that work only on linux, ubuntu exactly!

[peterwilson69]

Hi Matthieu, I was wondering what you thought of this design. It's looks pretty good to me and am thinking of building something similar. Which areas need the most strength in this sort of design?

[MatthieuChar]

Hello, the goal of this machine is to work on big sizes in only tender material, so it is not a very rigid machine! It need 2 screws for the X axis with 2 stepper motors.

the crossbar (Y axis) requires a lot of rigidity

[gbcelinec]

très émouvant ...