I use to pull real close, have the guy stuck winch to the top of my rear rack. Have my buddies lift the front of my 4wheeler then winch tight. This put mine doing a wheelie. When my friend jumped on my front rack it would lift the front of the stuck 4wheeler. (teeter-totter) It really bends the rack, but its already bent from doing it a few times. LOL
Been there done that! :) It helps sometimes if the 4wheeler pulling is closer. (if possibe) That way it lifts as it fulls and less forse is put against the bank. Happy mudding! :)
i have an orange 2000 honda rancher 350 full time 4x4 with that exact warn bumper and a warn winch, by listening to it that is not first gear, sounds like 2nd...
@GOINDEEP247 ive been stuck like that and once the suction grabs your stuck . i had my arctic cat in super low 4wd and the tires would not turn over in first gear. that was some sticky mud....
@GOINDEEP247 ive been stuck like that and once the suction grabs your stuck . i had my arctic cat in super low 4wd and the tires would not turn over in first gear. that was some sticky mud...
my 1984 200cc honda trike is the same way when i hit wet mud, but then again the brand new over sized tires that were put on it before i got it with excelent treads dont help... my trike is under powerd. any suggestions on how to make it more powerfull?
man i have a 400 rancher and ive never had problems spinning tires. buy some 589s. you wont have as much grip but grip doesnt matter if the tires aint spinnin'
Hey i dont mean to be rude, but that looks like one hell of scar the boys face. Im sure he can make a lot of stories for the girls with that one haha :D
sorta reminds me of my machine. 99' big bear 350 w/ winch. My buddy got a 350 rancher n he can never pull me outa nasty shit. But for some amazing reason my yamaha can get his ass out. For some reason yamaha has their gears set lower than honda rancher's
yea i have a rancher 420..not that hard..plus if you get someto stand to the rear of the racks while giving it some gas ( not alot) it will pull the fronts up
do you have aany idea what you are talking about?... i'd take belt over standered any day WAY BETTER for mud cause you can put in low and giver hell,with standered you gotta shift and in mud yoou ussualy can only get to second before it starts losing power.. and don't give me any b/s that imwrong cause ive 2 standered atvs and 2 belts... take belt ANY DAY!
i wasnt disliking either type of drive system. i dont really like belts. just because of what type of riding i do. i agree with the whole shifting thing. but i dont do much thick mud riding.
@yamaha4Llfe footshift 5-speed is the way to go. wait until that rubber band gets wet. lololol!!!!!!! all of the old honda, kawi, and yamaha 5 speeds are bulletproof. don't start with the honda bullshit just because you don't know how to shift gears or drive. of course the mother fucker is gonna bog down when you get out of first gear!!!! props to the old quads. everyone is copying polaris's idea. that shit is garbage!!!
@trx500fm1 fuck that belts for the win, imma bogger, i cant shift if the shifter is under a foot of mud.... now can i???, or when im doing a water wheely standing on my rack what am i supoose to do try and grab it with my hand, fuck that i only like standered quads for racing and going up and down roads, i like my belt
@yamaha4Llfe jeez! i was just looking at some old vids, and i noticed that you replied to one of my comments...over a year ago! well, i'm a little bit late on the answer, but 1:if your foot is anywhere near the shifter, then yes you can shift...your boot will just be muddy. and 2:if you feel like doing a water wheelie, then just keep it in 1st while your feet are on the rack...you won't be doing any fast water wheelies!!! lol.
Well, they are 26" and factory are 25". The only difference is 1 inch plus the tread. I believe the clutch is the problem and I plan to remedy it shortly.
what size is the winch??
Ekriptonite 3 days ago
u need a polaris
rctractorboy 3 weeks ago
Comment removed
hairynose656 5 months ago
man both of ur clutches must be SHOT
501video501 6 months ago
time to get the truck to yank er out
jeffersonS93 8 months ago
thats alot like what happens to me and my crummy 3 wheeler
kowal789 8 months ago
Thats not a 420 its a 350
1997djj 9 months ago
I use to pull real close, have the guy stuck winch to the top of my rear rack. Have my buddies lift the front of my 4wheeler then winch tight. This put mine doing a wheelie. When my friend jumped on my front rack it would lift the front of the stuck 4wheeler. (teeter-totter) It really bends the rack, but its already bent from doing it a few times. LOL
turftamper 10 months ago
Been there done that! :) It helps sometimes if the 4wheeler pulling is closer. (if possibe) That way it lifts as it fulls and less forse is put against the bank. Happy mudding! :)
turftamper 10 months ago
go get a damn tractor!
MonsterEnergyMudding 11 months ago
i have an orange 2000 honda rancher 350 full time 4x4 with that exact warn bumper and a warn winch, by listening to it that is not first gear, sounds like 2nd...
GOINDEEP247 1 year ago
@GOINDEEP247 ive been stuck like that and once the suction grabs your stuck . i had my arctic cat in super low 4wd and the tires would not turn over in first gear. that was some sticky mud....
kaospow 1 year ago
@GOINDEEP247 ive been stuck like that and once the suction grabs your stuck . i had my arctic cat in super low 4wd and the tires would not turn over in first gear. that was some sticky mud...
.
kaospow 1 year ago
@kaospow yea i can see that lol
GOINDEEP247 11 months ago
@reconben its a yamaha big bear not a kawi
TheDabomb57 1 year ago
thats wat u get for buying a kawasaki :P
reconben 1 year ago
my 1984 200cc honda trike is the same way when i hit wet mud, but then again the brand new over sized tires that were put on it before i got it with excelent treads dont help... my trike is under powerd. any suggestions on how to make it more powerfull?
kowal789 1 year ago
the suction got me the other day. my ute is still out the bush!
udiedby2h 1 year ago
Get all of you in there, its mud it would bite you
MrBubblez1 1 year ago
cool video man... Was your winch fried after that?
RecklessOutdoorsTV 1 year ago
what kind of tires are those on the stuck quad??? they resemble little outlaws.
trx500fm1 1 year ago
put it in first gear stupid
2324RCC 1 year ago
what size winch are you using and why didnt you just use the snatch block to begin with?
pj37910 1 year ago
did the honda drive around or did he make it first?
bradlee101 1 year ago
man i have a 400 rancher and ive never had problems spinning tires. buy some 589s. you wont have as much grip but grip doesnt matter if the tires aint spinnin'
easttexasoutlaw001 1 year ago
good god put the quad in a low gear, u can blow motors doing that
Erhorn300 2 years ago 3
It is low gear.
bossc351 2 years ago 2
those tires look way to aggressive for a 350
itwontme1111 2 years ago
bad clutch!
Machinethe1st 2 years ago
Hey i dont mean to be rude, but that looks like one hell of scar the boys face. Im sure he can make a lot of stories for the girls with that one haha :D
imhungry493 2 years ago
@imhungry493 Thats mud. Its not a scar.
bossc351 2 years ago
is that only 2wd
wd6k6 2 years ago
its soppose to be 4 wheel drive but the front differential does not lock or have limited slip.
bossc351 2 years ago
you neer to put lower gears on it
csxgk94 2 years ago 2
sorta reminds me of my machine. 99' big bear 350 w/ winch. My buddy got a 350 rancher n he can never pull me outa nasty shit. But for some amazing reason my yamaha can get his ass out. For some reason yamaha has their gears set lower than honda rancher's
ZGILBERT93 2 years ago
LMAO that thing is brutal..
CrfDirtKing 2 years ago
what size tires do you have?
taylorduke1994 2 years ago
The three of you can't just lift that thing up?
ArchNME 3 years ago
soulda got someone to pull up on the front of the atv..thats why it wouldnt go
Treyb0220 3 years ago
have you ever tried to lift an atv in that kinda mud?
shooter5635 2 years ago
yea i have a rancher 420..not that hard..plus if you get someto stand to the rear of the racks while giving it some gas ( not alot) it will pull the fronts up
Treyb0220 2 years ago
Get stuck enough times you figure out that if you get air under the tires it'll pop out. Just pick up the end and put in on drier mud
VindicatedNinja 2 years ago
hold camra still!!!
bubba499 3 years ago
is the 350 belt or standard?
if its the belt thats where your problem is.
but is its normal foot shift then your goin to need to replace the clutch plates more and likly
the4x4yamaha 3 years ago
do you have aany idea what you are talking about?... i'd take belt over standered any day WAY BETTER for mud cause you can put in low and giver hell,with standered you gotta shift and in mud yoou ussualy can only get to second before it starts losing power.. and don't give me any b/s that imwrong cause ive 2 standered atvs and 2 belts... take belt ANY DAY!
yamaha4Llfe 3 years ago
i wasnt disliking either type of drive system. i dont really like belts. just because of what type of riding i do. i agree with the whole shifting thing. but i dont do much thick mud riding.
the4x4yamaha 3 years ago
yo sorry about that man.. most people on youtube well honda people always rip on belts, soo sorry about that agian
yamaha4Llfe 3 years ago
its fine man. i dont have a problem with belts they just arnt for me.
the4x4yamaha 3 years ago
@yamaha4Llfe footshift 5-speed is the way to go. wait until that rubber band gets wet. lololol!!!!!!! all of the old honda, kawi, and yamaha 5 speeds are bulletproof. don't start with the honda bullshit just because you don't know how to shift gears or drive. of course the mother fucker is gonna bog down when you get out of first gear!!!! props to the old quads. everyone is copying polaris's idea. that shit is garbage!!!
trx500fm1 1 year ago
@trx500fm1 fuck that belts for the win, imma bogger, i cant shift if the shifter is under a foot of mud.... now can i???, or when im doing a water wheely standing on my rack what am i supoose to do try and grab it with my hand, fuck that i only like standered quads for racing and going up and down roads, i like my belt
yamaha4Llfe 1 year ago
@yamaha4Llfe jeez! i was just looking at some old vids, and i noticed that you replied to one of my comments...over a year ago! well, i'm a little bit late on the answer, but 1:if your foot is anywhere near the shifter, then yes you can shift...your boot will just be muddy. and 2:if you feel like doing a water wheelie, then just keep it in 1st while your feet are on the rack...you won't be doing any fast water wheelies!!! lol.
trx500fm1 5 months ago
that is kool dude
goodlife350 3 years ago
u need smaller wheelers
geotrackerboy 3 years ago
Well, they are 26" and factory are 25". The only difference is 1 inch plus the tread. I believe the clutch is the problem and I plan to remedy it shortly.
bossc351 3 years ago
why wont the tires spin clutch slipping or somthing thos are some big tires on a little wheeler.
BcBaSneakyNinja 3 years ago