I have problems with my peep sight rotating when i draw. can i put some twists in the string? also im haveing trouble setting my tiller to even its always 5mm out does that matter if im getting 2inch grouping at 25 yards?
@bluelagoon10023 - you have to decide if the bow shoots well enough to suit you. As far as the peep goes, some string materials creep which may result in peep rotation. Twisting a string on a compound bow will either lengthen or shorten it & change the cam timing. Assuming the string is shot-in (or whatever you call it there) the string (assuming no creep) should not continue to rotate. You can then either 1) install a peep w/alignment tubing or 2) reinstall it in the right location & position.
@bluelagoon10023 okay on your tiller tighten it all the way down and take off a turn at a time until your at your desired poundage okay now about your peep turning if youve shot over 100 shots on that string take out one twist off your string if not shoot it about 100 times then take out a twist
hi could you please tell me where the strings should crossover ,is it on the upper limb or the lower limb ive just restrung mine and had it crossed over on the lower limb too late to change it now as my press broke.
hi could you please tell me where the strings should crossover ,is it on the upper limb or the lower limb ive just restrung mine and had it crossed over on the lower limb too late to change it now as my press broke
The Golden Key Centering Tool Works Ok, But For More Acccurate Centering I Use Game Trackers EZ CENTER SHOT tool, It Installs On the Limb Bolts And A small Ruler Lays On Top Of The Arrow, Take Your Measurments Off the CAm Or Wheel, Do Some Simple Math, And Adjust Your Rest, Easy And Simple, I Think it cost About $20
Thanks for the tip. The laser is functional I'm sure but I figured there must be a simple solution. If not the centering tool or gauge I showed, then something else.
Someone asked that question a while ago. It is such a simple tool I don't know if they still make it. Last I looked, a laser version is still available. Try Lancaster Archery, if it is available, they'll have it.
I have problems with my peep sight rotating when i draw. can i put some twists in the string? also im haveing trouble setting my tiller to even its always 5mm out does that matter if im getting 2inch grouping at 25 yards?
bluelagoon10023 1 year ago
@bluelagoon10023 - you have to decide if the bow shoots well enough to suit you. As far as the peep goes, some string materials creep which may result in peep rotation. Twisting a string on a compound bow will either lengthen or shorten it & change the cam timing. Assuming the string is shot-in (or whatever you call it there) the string (assuming no creep) should not continue to rotate. You can then either 1) install a peep w/alignment tubing or 2) reinstall it in the right location & position.
rldel149 1 year ago
@bluelagoon10023 okay on your tiller tighten it all the way down and take off a turn at a time until your at your desired poundage okay now about your peep turning if youve shot over 100 shots on that string take out one twist off your string if not shoot it about 100 times then take out a twist
corydstroyer 1 year ago
This has been flagged as spam show
hi could you please tell me where the strings should crossover ,is it on the upper limb or the lower limb ive just restrung mine and had it crossed over on the lower limb too late to change it now as my press broke.
1000000volts 1 year ago
hi could you please tell me where the strings should crossover ,is it on the upper limb or the lower limb ive just restrung mine and had it crossed over on the lower limb too late to change it now as my press broke
1000000volts 1 year ago
Where did you get that toxonics extended sight from an what did it cost you? Great video
MIRCWOOD 2 years ago
Hmm, the extension I got directly from Toxonics via their web site. The site was initially bought at a local BassPro.
I think you can still find it via online stores line Lancaster Archery, BassPro, etc.
rldel149 2 years ago
Ok. Thanks
MIRCWOOD 2 years ago
The Golden Key Centering Tool Works Ok, But For More Acccurate Centering I Use Game Trackers EZ CENTER SHOT tool, It Installs On the Limb Bolts And A small Ruler Lays On Top Of The Arrow, Take Your Measurments Off the CAm Or Wheel, Do Some Simple Math, And Adjust Your Rest, Easy And Simple, I Think it cost About $20
masterarmorer 2 years ago
Thanks for the tip. The laser is functional I'm sure but I figured there must be a simple solution. If not the centering tool or gauge I showed, then something else.
rldel149 2 years ago
Someone asked that question a while ago. It is such a simple tool I don't know if they still make it. Last I looked, a laser version is still available. Try Lancaster Archery, if it is available, they'll have it.
rldel149 2 years ago
Can you tell were I can find the arrow centering tool at. Thanks
ltbig24 2 years ago