Turbocharged 2.2L Chevy S10

[any2willdoqq]

Where did you get that manifold?!?!

[WWWDTS2NET]

@any2willdoqq I make them 

[cometpowell]

4 cylinder?

[xRAWSAWx]

so without forged internals you'd say that i could probably go with a turbo set at around 6-7 psi?

[FalakZareen]

would i need t do any other tunning or change part to my engine with this kit?

[WWWDTS2NET]

@FalakZareen Nope, it comes with absolutely everything you'll need, the only part that I can even suggest would be a turbo timer.

[FULLEFFECTCARCLUB]

who takes a H2 to the drag strip.... anyway, that was a pretty sweet s10, what did your s10 run?

[WWWDTS2NET]

@FULLEFFECTCARCLUB In this video it went 15.1 with a stock engine on 8psi at 6000 ft elevation. Most customers go into the 14's with that setup. We have trucks in the low 13's / high 12's now and I'm expecting my truck in this video to be in the 11's very soon!

[dirtrider582]

what time did you run at the track?

[123pbk]

would the stock internals handle 5lbs of boost???

[WWWDTS2NET]

@123pbk They'll handle 8psi sometimes more... 8psi is pretty safe though

[Darkside2205]

my 2001 gmc sonoma (s-10 clone) has aprox. 160,000 miles on it, would it be safe to use this kit on it?

[WWWDTS2NET]

@Darkside2205 It should be, if it's in good shape and works properly before the turbo it should work properly with it!

[Darkside2205]

@WWWDTS2NET i have a 2001 gmc sonoma and I love everything about it, except the slow 120hp engine in it >.>

[WWWDTS2NET]

@Darkside2205 We can fix that!

[asssface2000]

@Darkside2205 s10 clone? wtf lol you fucking tard.

[Darkside2205]

@asssface2000 well that's basically what it is it's the same exact truck. it's the GMC version of the s10 same truck, different grill is about it

[asssface2000]

@Darkside2205 no shit retard, its the same truck not a fucking clone

[Darkside2205]

@asssface2000 well technically its not the same truck, its a sonoma not an s10, its just mostly the same, making it a clone. do you get a kick out of being an asshole? I mean did it seriously bother you that much that I used the word clone? Go troll somewhere else

[jessewallace94]

im getting a 99 s10 2.2L automatic. how much do you think it would cost to make mine move like that

[WWWDTS2NET]

@jessewallace94 The kit is $3000 and you'd just need a little extra work/tuning on your transmission

[TheCg18]

How much are we looking at here????

[TheCg18]

I have a 98 chevy s10 2.2l 4 speed trany and was woundering if I could do that with my truck?

[WWWDTS2NET]

@TheCg18 Yep, sure can.

[AnotherDayInTheNJ]

what does this kit consist of? where can i find it?

[WWWDTS2NET]

@AnotherDayInTheNJ it comes with everything you need for the turbo conversion and you can find it at DTS2.net

[Yum917]

about how much does this conversion cost?

[WWWDTS2NET]

@Yum917 The complete kit is $3000. It's $3150 shipped and comes with EVERYTHING you need for the turbo conversion

[slipknot12390]

dude where did u get some of those parts for your truck because im buying an s10 with a 5 speed trans and a 2.2 in it and i really wana turbo it but idk where to buy the stuff at so if anyone could help me with that i would very appreaciate it thank you

[WWWDTS2NET]

@slipknot12390 I make the kit myself. You can buy them from my website DTS2.net or by calling me @970-493-0459.

[antiemo9]

Hey I have a 2000 2.2l s10 and I was wondering what was included in the turbo kit and approx. how much it would cost. This is the only kit I can seem to find for besides on the STS website which no longer seems to be filling orders.

[619russman]

love tht part in the beginning when he whips round the corner!! XD

[motorfreak12]

new favorite truck lol

[juggalotus41]

can i do that to mine ive got a 03 s10 automatic ls 2,2

[WWWDTS2NET]

@juggalotus41 Yes, you can absolutely do this to yours!

[juggalotus41]

@WWWDTS2NET how much whoulld it cost and how much trouble whould it be to install it al it will be fasyt right

[HedgehogOutdoors]

@WWWDTS2NET Do you think a 4wd Toyota with a 4 cylinder could do this? I'd be worried about the height of the truck more than power, but what do you think?

[WWWDTS2NET]

@HedgehogOutdoors I know they can... it's been done many times. The toyota 4runner used to come from the factory with a turbo 4 cylinder and there is a company that makes many performance parts including a turbo kit for the popular toyota 4 cylinder

[HedgehogOutdoors]

@WWWDTS2NET Ok, thanks for the help! Do you know what the name of the company is?

[WWWDTS2NET]

@HedgehogOutdoors LCE performance

[HedgehogOutdoors]

@WWWDTS2NET Thanks, I'll check them out.

[MechSpartin2]

@juggalotus41 Lol 3 speed, why bother?

[boostedsedan]

I was going to pull the 4.3 out of my 98 p/u and swap in a lq9 6.0L, but decided to stay with the v6. Turboing the v6 will be lighter, cheaper, easier, and less common than the v8. Trying to decide whether to go twin or just one bigger turbo.

[WWWDTS2NET]

@IsKrisKrazy The standard stage 1 kit fits into the 94-98 S10's with no modifications necessary. You'd have to get a custom header built or an adapter pipe made to go from your header to the turbo kit chargepipe to make it work but it would be a fairly easy modification.

[99LSDyme]

lmao... i saw the 4 turbo's, then the 4 downpipes and was like awww shit quad turbo tutu!!

[kevinreid]

@irishjdc tell it to john lingenfelter (7sec 1100+hp turbo 2.2 4cyl) he pulled his v8 out to do so!

[joey383]

is that still the same computer or a stand alone programmable type.. i would like to

do that for my s10.. good work give you props on that one..

[WWWDTS2NET]

@joey383 I'm reflashing the stock ecu's with HP Tuners

[panjasax]

@irishjdc it aint rice, its just a four-banger with a turbo outer.

no its no a 350 or a 383, but its pushin turbo for higher end speed when it kicks in, not a supercharger so it can lose traction when the outer kicks in 3 feet off the line.

and yeah, a 350 with a mild cam is puttin out about twice as much as HP as a stock 2.2, but thats not the point, its HP to weight, not horsepower for shits and giggles, and the 2.2 is lighter with a turbo than a 350 is without.

but its whatever

[kennymbell1]

what in the world was the hummer driving thinking?? who drag races a hummer?????

[WWWDTS2NET]

@kennymbell1 It was test and tune night, it was a chick that was running down the track just for fun to get used to it.

[stringbreaker6]

THE GUY IN THE HUMMER STILL OWNS U BCUZ HE DRIVES A HUMMER!!!! LOL

[jeffcougar1968]

what head is on it

[WWWDTS2NET]

@jeffcougar1968 It's the patriot performance stage 3 cylinder head that we sell with our built engines

[RebelFlag61]

Wow that's really impressive. Especially considering how that engine in a stock Cavalier can barely get out of its own way.

[WWWDTS2NET]

@RebelFlag61 Yeah they are terribly slow stock and we make them hang with some of the fastest street cars around!

[garrittpwl]

thats looks like a lot of work for a 15 second car :/

[WWWDTS2NET]

@garrittpwl This particular run was a 15.2 @ 6000ft on 7psi untuned without launching... It was a terrible pass that I was embarrassed to post considering how this thing actually runs and the cars it beats on the street. It's just the only video we were able to capture that season. Not that I'm making excuses for it but you find your favorite 14 or 15 second car and I'll run you for any amount of money spotting you the launch! ;) We terrorize 13 second cars out here all night long!

[JooKed]

Who the hell takes a hummer to the track

[edawg305]

lol that hummer was like 20 seconds in the quarter!!

[Doosterify]

No ET or MPH??? it looked slow on the track. Whats up with that?

[WWWDTS2NET]

@Doosterify It was like 15.3 @90mph see my response to garrittpwl for more info

[70chevelle8]

does the intercooler have to go in the middle of the bumper like that? I have an xtreme and i dont want to ruin the look of it. I would like to keep it looking stock so i can surprise people at the stoplight

[70chevelle8]

@70chevelle8 also my xtreme has a 4.3

[WWWDTS2NET]

@70chevelle8 it's kind of the only place for one but you don't have to cut open the valence, you can put a scoop underneath it and channel the air in that way

[70chevelle8]

@WWWDTS2NET cool

[TheUV123]

my stepdad has one to for drag strips and it use to run 15sec i know its slow but now it runs 17sec cuz he dont know wat hes doin to it

[bluefox121]

i want that SOO BADLY!! soooo badass! i have a 03' 2.2l with a 5-speed

[WWWDTS2NET]

@bluefox121 thanks man, save up and get a kit, we'd love to build one for you!

[bluefox121]

@WWWDTS2NET $5000.00 is alot of money more then i bought the truck for man!

[WWWDTS2NET]

@bluefox121 who said it was $5000??? we sell the stage 1 kit to get you going for $3000... That's normally good enough to put you into the 14's with a stock engine and the same kit will make nearly 500hp with the addition of a built engine.

[musicsmylife22]

major props on the truck man that thing is sick i got a white sonoma with some rims its not turbo or anything yet but i want to sometime nice job man. does it keep up with them stags pretty well?

[WWWDTS2NET]

@musicsmylife22 Yes, and the subies, honda's, and evo's as well... It's pretty rowdy!

[WWWDTS2NET]

@SuperBrandango Yes, we have a twin turbo setup for the 4.3L that we are very excited about!

[SuperBrandango]

@WWWDTS2NET thats cool man how much do those run for?

[WWWDTS2NET]

@SuperBrandango They are on sale for $4800 right now but will most likely settle into a price of $5000-$5500 depending on how fast we can keep producing them.

[1Corvetteracing]

dude i looked at ur turbo kit and i want to buy it so i ll save up some money but where did u get that aluminum head

[WWWDTS2NET]

@1Corvetteracing It's the Patriot Performance Stage 3 head... we sell them too

[1992TyDye]

great work! love it,. and consider a crate motor for my wifes s10!

[zobel929]

how much is the stage 2 kit?

[1Corvetteracing]

where did u get all the shit u need 4 this

[WWWDTS2NET]

@1Corvetteracing I am the source, I own DTS2.net, I build all of the S10 turbo components.

[1Corvetteracing]

@WWWDTS2NET oh , but how did u find that aluminum head i've been lookin for one for ever so when i buy a turbo it can handle the psi

[1Corvetteracing]

@WWWDTS2NET and does that head come wit rocker springs and exhaust valves 

[99xtremeturbo]

hey i have exact same turbo kit in my s10, is it bad cuz i can hear my turbo wind up and i could never hear it before, or is it just getting worn in, i have had it in for about 1 year

[southernrock20]

Glad to see that you have a vid up! It looks really good.

[laugel]

how much would it cost to turbo a 2.2L if you did everything yourself, just paying for parts.

[netrioter]

This run could have came way down e.t. with a better launch/tires and the 5 link rear out of a Xtreme. ive seen high 13's with a swapped 2009 Cobalt SS engine with 260 hp and that setup with a automatic.

[postalaka]

What exhaust config are you using ?Muffler?

[repenseattle]

nice truck, nice song.....go for the v8 lots more power, cool stuff man

[theblackmech]

is that an aluminum head? where did you get it from?

[bournebrandon91]

How much would this cost an everyday guy for someone else to do it?

[70chev10]

What brand of turbo is in your kit? Also what is involved in tuning the turbo in? Either way my Sonoma is beggin for a stage one kit. Nice guys

[Michael10291984]

from 16 seconds to 18 seconds, what kind of header is that? is it custom built?

[JeepCherokeeKid]

how much would a fully built engine cost it doesnt say on the webite i am saving up money for a turbo and i dont want it to be held back at all, also my truck has a auto i belive its a 4L60E same as fullsized trucks so do you think it would hold up to high hp thanks for any help you can give me.

[WWWDTS2NET]

The rotating assembly parts package is $1100 and a fully assembled crate engine is about $4500 and we can sell you several levels of completion in-between. The transmission is okay but will need a better torque converter and tuning.

[WWWDTS2NET]

We have made some changes and the track is closed for the winter so we'll have to wait a few months to find out for sure but on 15psi we have data logs that show an average acceleration of 10mph per second. It's actually closer to 20mph per second in first and second gear so we should be able to put down an 11 second pass even at elevation... Lets put it this way, it's going to run 11's or else. lol

[WWWDTS2NET]

You'd need a built engine along with the turbo... The stock engine is only good for 14's. The standard stage 1 turbo kit is capable of 500hp though. All you need is the built engine, fuel upgrades, HP Tuners software and a clutch.

[KENET1234]

Hi what piston you use in your s10

[WWWDTS2NET]

I run Mahle pistons but it's a custom application... I am not sure if you can get them as a direct fit. You can purchase the rods, pistons, and racing bearings from me though!

[ibuiltmineo1oo]

well, that looks like bandimere!!

[WWWDTS2NET]

It is, we are located in Fort Collins

[ibuiltmineo1oo]

Right on dude! I have a 2.2 s10 I want to turbo!

[WWWDTS2NET]

Do you go to Bandimere often? We will be at Bandimere with a vengence this year!

[dv8s10]

This truck looks good! I want a turbo kit for my 4.3l s10!!!

[WWWDTS2NET]

I make turbo kits for the 4.3l as well