Added: 3 years ago
From: warren12582
Views: 100,407
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (204)

Sign In or Sign Up now to post a comment!
  • this guy dont know how to drive worth shit!!!

  • What type of blow off valve is that

  • my R33 on 13psi is faster than this

  • @a1cdoddy What does it do in the 1/4?

  • @FdSnakeEater No idea man, I live in okinawa and there aren't any drag strips but if i had to estimate i'd say low 13's...my mods are intake, full 3 inch straight pipe turbo back, tubular manifold, NGK iridium's gapped to .7, Greddy boost controller on .9 BAR, FMIC....the thing moves out pretty well....specially now that its chilly out ;)

  • @a1cdoddy lol

  • Very nice.

  • that fucking rb is slow.shame on you.

  • was that on stock turbo?

  • yo have to get a LSD man

  • So you can just press that and switch between tunes? I've never seen one of those before.

  • sik car very tidy job.

  • yo what blow off valve is that?

  • all u need is to change that exhaust to a greddy full exhaust then were talking i know thats a ebay exhaust w a custom pipe to not be so noticeable with cop well u have notice lol jk but it looks better with greddy or n1

  • gay exhaust

  • Comment removed

  • why does EVERYONE have to have their boost controller flapping around looking like it was put on half ass. Sheesh bolt that shit down its not that hard!

  • Comment removed

  • Have fun when you blow the ceramic fins off your turbo..

  • Would u just cut to the fucking scene..

  • bales berga puto enseñas el carro olos putasos que trae y bales doble mente bbbergaaaaaaaaaaaaaaa puto,,,,,,,,,,,,,,,,,,,,

  • I like how you show the dent lol. Clean car man.

  • SURGGGGEEEEEE..... lol Running an external wastegate for the extra boost?

  • is the swap street legal in nevada ???

  • is the swap street legal in nevada ??

  • ahaha omg this looks EXACTLY like my 240 AND im lookin into the rb25det swap! HAHA awesome!!!!!!

  • I know it sounds amazing compared to SR's and inline 6's are much smoother and have alot more torque but where I live parts are not a problem, I can get them easy for dirt cheap

  • very nice considering it was mostly stock, getting a rb25det NEO for my s13 stock 280hp but with hks cams, hks exhaust, and a intercooler probably 350hp, but first of all how do you like your swap, is the rb25 good? I heard it was 10x better than sr20 and best of the rb's

  • @Brendon00000 Rb stuff is just more expensive but its much more reliable than a sr, and it has more potential and actually sounds good

  • think he said stock boost not turbo itself

  • Hey man. Like the swap. I just got mine finished up. Just a little heads up. If that is the stock turbo I would not recommend going over 10lbs of boost. Since the turbo cannot handle over that. You can push it past ten but the compressor wheel will shatter beings it's Ceramic. Just a heads up.

  • forged internals?

  • hey man nice car i got a rb20det with a t4 top mount i wonder how much more power a rb25 has over a rb20? oh and ur missin an air filter im sure u probably know, not good man dont wanna suck nothn in that turbo

  • um.. is that an open diff?

  • If you still have your RB25 240sx... Post more videos up!! Its a nice car man!!

  • what kinf of BOV is that?

  • @SuperCoolROCKS That's called no blow off valve lol

  • @jersthecool surge compressor?

  • @lCBzl Yeah it's definitely compressor surge. If it was a blow off valve it would sound like a whoosh sound not a fluttering sound like that.

  • I love your 240 so much man! This thing is so clean!(besides the key scratch and baseball bat dent from those damn haters!)

    I was wondering, was it hard to mount the engine and tranny in your 240? I'm thinking of buying a 240sx with no motor or trans and putting the rb25 in it, but I don't want to run into any problems.

  • you need a LSD

  • correction those are xxr 962's nice s13 i was thinking about running these wheels also there hella cheap 500 brand new thats a good deal 18x9.5 all the way around with 25mm spacers bam done

  • Oh man I wish I could roast my tires on an off-ramp traffic jam!

  • r u using the turbo that comes with the rb25?

  • ey where u buy u r25 det i need 1 and who put the engine and u car 

  • Man! it sucks that you dont have a locked diff!

    maybe you dont want one?

    i would prefer that!

  • not compressor surge, he's not boosting while sitting still, so its just some flutter in the bov. listen to it when he's driving, can't hear it can ya?

  • that thing GOES !

  • rev it up get that bitch sideways.

  • i thought the airplane was the car and i was like damn it sounds like a jet lol

  • put a 1.5 rear end in it at least....

  • lol your coupe looks just like mine, same wheels and everything. Course mine is KA-T with a t3 60-1. About to order my RB25DET very soon... i'm stoked!

  • Inline 6 in a 240sx s13???

    Better then a SR ???

    Cost???

  • i love when people are as excited about their s13 as i am :)

    that muffler has to go though.... too small of a fart can....

  • nice rb motor and idk y everybody goes with the sr20det all da time

  • Nice swap, would you recommend it

  • open diff much?..plz take the pep boyz exhuast tip off lol...sounds good tho

  • my bro wants me to swap a sr20 in his 240 but im tryin to get him to let me do this swap. when u swap a sr a 240 is still slow as hell. great job man ur swap looked clean i hate when people swap dirty motors into the car. hopefully this vid will convince him.

  • what BOV do you have .??

  • i have the same wheels on my s13

  • you are so fuckin lucky dude my 240sx died 2day

  • fucking love it

  • what rims?

  • why did you show all the scratches? were you tying to sell it?

  • How much did it cost so do the engine swap?

  • what turbo you running?

  • I am planning on changing my Ka24de to an Rb25, On what problems am I going to get into....Like motor mounts, etc.?

    By the way nice car!

  • is your bov a greddy type rs bov?

  • Great swap.i have a s13 with rb25 swap too.are you using the stock turbo?what BOV is that?the old HKS twin chamber?

  • how are people saying that is surge ? ummm lets see , from the revs off the throttle body then engine still never came out of vacuum i bet . i like that sound , its like off team america , where they keep sayin derka derka derka .

  • Fix the compressor surge and put a intake filter on and you'll have a good running car.

  • XXR 962'S?

  • clean 240

  • You put the motor by yourself

  • I have a quick question what kind of blow off valve are you useing ?

  • Back Pressure causes Compressor Surge.

    When you snap the TB closed all that built up pressure heads back towards the Compressor wheel causing it to surge if the BOV is adj. incorrectly or not used.

    But its not that bad for just idle REV's especially with BB turbo's, It more dangerous durring WOT when the turbo is out flowing more than what the engine can take in. But he doesnt need to worry with a stock turbo.

  • Damn that's a very tight fit! But fail on the compressor surge, get it fixed before you lose the turbo.

  • @bman409: no my friend, it is you who have actually failed by mistaking back pressure for compressor surge.

  • dude sounds like compressor surge to me

  • @guccamain: compressor surge does not occur off throttle. it occurs at full boost. compressor surge occurs when flow becomes unstable and is at it's most inefficient. read up on compressor maps and compressor surge and you'll understand what i'm talking about. i'm not trying to put you down, but currently it seems you do not know what compressor surge is.

  • compressor surge occurs when the throttle is shut and there is too much pressure causing the turbo to spin backwards

  • from around 2:50 it kinda sounded like compressor surge

  • what bov is that

  • did you use the ka24e ecu by any chance? what was the process with that?

  • Comment removed

  • i enjoy the sound of Compressor Surge for some reason.

  • are those XXR's?

  • I don't remember, but i think i paid 550 with tires brand new at garcia's tire shop in bell gardens, ca.

  • @dupac09 haha yea they look like xxr 962's to me

  • @dupac09 xxr 962's

  • y not just buy a skyline???? nah seriuosly

  • Skyline is expensive and RB25DET engine costs 1000-1600$ so its better put skyline's engine to Silvia and done, silvia is more light than skyline...

  • Because skylines are really fucking rare and if u fibd one it cost a fortune dumbass

  • Hey i got a 89 240sx coupe just like this. i got mine for 1 grand 111,000 miles on it all i needed was a new clutch. its got a solid frame and everything. what is your power output with 7 pounds? how much did the whole engine and stuff cost? where did you get the engine? is it hard to fit in the engine bay? your help would be very much appreciated thanks

  • @kirtster you can fit almost anything in a 240.

  • sweet car dude

  • shity 1 wheela

  • really nice car man i plan on doing the rb25det swap just need to know what all i need to do the swap

  • same does anyone know what u need to do the swap? ill have about 11 or 12 grand to do swap but i need to get the car as well. i figure i can get a rolling shell or a blow engine for like $1,500 or maybe even $1,000. i can get the motor for just under 3 shipped. i just dont wanna go over 11 grand. any one know how much the swap is?

  • you need to use the search. plenty of swaps out. I would go with a 2jzgte swap i just did it and spent about 6,000, good luck

  • @warren12582 What? A toyota instead of the vaunted 'godzilla' engine? How dare you, sir, you're putting sinful thoughts into the minds of children.

    On a side note, you really need to not test your fast car out next to a school. Go find some asshole with an exotic on the freeway to embarrass.

  • U miss a nut on the wheel

  • really? where? j/k I know

  • @warren12582 one thing i find odd about the usmd s13 is it has the 240sx front end . the jdm one has the silva front end . why didnt they use the jdm s13's front end

  • what is that bov?

  • what is that bov ?

  • is there a way to paint the valve cover? red or blue or something lol

  • onevia!!!

  • Damn, thats some nasty compressor surge....your going to kill your turbo's by doing that.

  • sil80 reversed hahaha

  • onevia is the way this is called

  • very very nice bro, good job!! wished i had an rb, but i'm happy with the sr for now lol.

  • ur fuckin pathetic retard for callin this gut pathetic all u ppl didn't ur mother ever tell u if u cnt say something nicew dnt say nething at all/ why cnt u folks jus say good try, nice car or something like that but no all yall hav to hate on ppl and talk down on folks and thats fucking sad so wheres the videos to yalls cars since yall r all so badass

  • anyone else notice only 3 lugs?

  • yesss

  • @TOXIKKOBK hahaha yeah. 4 lug rims, he;s missing a lug nut

  • the stock turbo aint gonna like 13 psi for long!

  • meh, it wont really hurt it. shouldnt anyways. i have the stock t25 on my sr running 12lbs, thats what they're rated for. the actuators just open up at 7 stock for safety. and rb25's have t28's stock (i think) and they're rated up to 18psi.

  • rb25 stock turbos have ceramic wheels.. they dont last long past 12 psi... stock psi for them is 7 psi.

  • what bov is that

  • serioiusly!, i want it lol

  • one word....PROTUNE!

  • Lol why were you swerving so bad under hard acceleration? (4:27) God forbid you drive that car with a better diff.

  • @AllenIsbell bogging doesnt mean its the diff. he has lsd so it doesnt matter, its cause he isnt tuned correctly for low end. hes probally doing this diy so its not perfect

  • I didn't say he was bogging. My point was that he was swerving like hell with an open diff. That is not a LSD. If it is, it's fucked. If the car has the stock turbo at stock boost, there is no need for a tune. If it's running like shit, there's something mechanically wrong.

  • lol he doesnt have an lsd. im with allenlsbell..no reasonable reason i can think of why he would be swerving like that. he clearly doesnt have an lsd or the car would of kicked sideways when he hit 2nd instead of peg legging down the street. (5:23). so unless the diff is fucked or loose, its an open centre = lame, haha.

  • compressor surge FTW....

  • @itsjdmdean its a sequiential bov 1:44 not surge its blowing off at differnt pounds nice bypass

  • Horsepower output for stock SR20DE is 140HP, and for RB25DE it's 197HP.

    As you can see, 29% higher HP output from a stock RB25DE versus an SR20DE.

  • and wat is the point ur trying to make

  • get a better diff!

  • Wasnt this car for sale on Craigslist.?!?!

  • i saw it too... omaha?

  • car is nice and you did a great job but why risk trashing your car doing all this shit on main highways blowing it sideways... you would think you wanto to have it last a little bit.. but to each their own

  • LOL 400hp at the crack on a stock turbo?

  • wow nice sound but Compressor surge is bad...=(

  • I have a question...

    I was planning on getting an SR20DET on my silvia but after this video im debating on a RB25DET. What are the advantages?

  • RB25DET has a much higher potential and more power output stock. It has higher displacement, increased bore and stroke, higher efficiency, and is more durable (uses iron cast instead of aluminum cast in SR).

  • Alright thanks :)

  • yes ur rite the rb is the flyiset motor the bore and stroke is just rite for 10,000 rpms

  • Was this car driven in Cali? What were your experiences with the police like? I might be getting something like this so I'd like to know.

  • I don't know. I never been pulled over. But, I would be cool, answer honestly and cross your fingers.

  • if you don't have a record then it should be a stop and go citation.

  • Could you refer to anyone who has had experience with police in this kind of a car? Do you drive this car daily?

    BTW, major props. That's an awesome car. I love keeping the stock simplicity with extreme power for the ultimate sleeper combination.

  • Loosen the tensioner spring on that BOV, you're getting nasty compressor surge. Also, you may not wanna run that car much beyond 10 as the ceramic wheel in the stock T3 shatters from sheer centrifugal force much passed 12psi. But, what do I know, I only owned an RB25 swapped coupe for a year :-P

  • What happened to it?

  • that compressor surge is really nothing to be honest. DO you know what compressor surge really looks like? Try searching it. it happens while your boosting not while letting off the throttle. let me know when you see it. that surge literally will shake all your ic piping and you will feel it in the steering wheel.

  • @warren12582: +rep for spreading the word on the truth about compressor surge.

  • @warren12582 compressor surge is when the intake side of the turbo wheel is spinning backwards from the bov no letting all the air out of the IC pipping so unless u open the bov a little more with the tension spring like mentioned about then your gonna shatter that compressor wheel. But u can listen to me if ya want if not u will find out eventually.

  • @warren12582

    wow you are stupid "feel it in the steering wheel"

  • @warren12582 do YOU know what compressor surge is, and what it really looks like??? it does NOT happen while boosting. it happens because when you let off the throttle, and the boost doesnt get to escape out the blow off valve... the boost comes back out through the compressor turbine in a fluttering sound. "feel it in the steering wheel" ??? what a dicktard

  • @warren12582 haha i was going to say something about that but looks like im too late....10 months too late o.O

  • @S13Sldewayz ... yeah you are a dumbass, that isnt compressor surge in the least... its just some flutter because he isnt into boost yet, so there isnt enough pressure for the bov to open.... oooh man this is pointless...

    to video poster... warren get yourself a diff... that car is nasty bro good job! what mounts did you use, and did you have to do anything with the sway bar...

  • @djfnow "there isnt enough pressure for the bov to open.... " And that's exactly why he needs to loosen the tensioner spring. And yes....that is compressor surge. Do some research and pay attention kid.

  • i personally dont like the silvia front end on a 240 it looks just wrong but nice car keep up the good work

  • yo i think i saw this car on craiglist

  • It was on craigslist. :-P

  • i love flutter but its fucks your turbo up

  • oooo weeeee son. im a honda guy by nature, but u gotta give respect where its deserved. 5/5

  • JDM is JDM bro =]

  • ya u may like dat sound but u have surge

  • I would like to know where you got your BOV? please let me know. Cause I'm also doing a build I really like the sound of that BOV

  • it came with the clip already installed.

  • you need a LSD bad that thing would be sideways nice job though, looks good

  • Nice swap, don't run like I would think, but than it's probably all stock... and u need better wheels, these look nice but are weak... had them...(cheap)... keep up good work...

  • No Way!! I almost bought your car a couple years back...I'm from colorado I called you and talked to you about it a bunch..it never ended up working out I got a real nice sr hatch out here just sold it and the dumb ass kid wrecked it! I'm looking for another one...any chance you thinking of putting this one up for sale again?

  • hey thats the song from forza 2 haha

    nice car man

  • Warren, do you live in the USA?

  • california

  • fucking SICK!

  • have you ever tried passing inspection with this?

  • sure did ;-)

  • det some nice offset rims... zero offsets never look good on the s13 cus they dont have flares on the fenders

  • :):) yeah man rb power s13 ftw

  • Where did u buy the swap from?

  • how much did the swap cost you overall?

  • 5-6 thousand

  • sweet thanks

  • what rear are you using?

  • stock lame rear