Frontside Grind - Rollerblading

[mkballer18]

▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬

ＳＨＵＴ　ＵＰ　ＡＮＤ　ＥＮＪＯＹ

▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬

[DNYLNY]

epic for no reason lol

[snowboardskater1102]

i took my moms old rollerblades took out the two inner wheels and could grind. tells you just how hard roller blading is.

[Mr5biker]

ghay

[MrSwick23]

dude your not cool get rid of the gay helmet

[SkatingRocker101]

@MrSwick23 better than smashing your head open on concrete

[teddy12012Y]

@MrSwick23 tough guy thinks he can't open his fucking head, you're such an ignorant.

[MrSwick23]

@teddy12012Y No i just dont wear a gay cycling helmet i wear a skate helemet... what your wearing offers about as much protection when skating as a baseball hat :L

[neokregon2009]

@MrSwick23 I got an inline/skate trip[le 8 helmet now with a removable washable liner (sweat guard). Its really cool cause it doesn't smell like dog shit after it gets worn a few times.

[MrSwick23]

@neokregon2009 Good for you ! (Y)

[neokregon2009]

I'm a big fan of antirocker wheels now. I use to use the xsjadow mook frames and they were cool but of you lean to far forward my wheel would bite and throw me. With the antirockers - if i lean forward they hit and grind. Now I have ones that take bearings which are cool so they don't grind into little cubes because they barely spin

[McIntyreMedia]

@neokregon2009 I went the opposite way. I had stock remz with antis now I use xsjado mook. Definately a different feel, but it's worked out so far.

[Baciox48]

where you learned this? have you a site?

[neokregon2009]

@Baciox48 There are some instructional video clips on YouTube like AMALL, OSC, OMBHOST, and others. If you click on my name in blue you can see my channel and tons of trick tips are in my Favorites section. --- But I REALLY WISH someone out there would make a very detailed instructional dvd on tons of trips and tips. I would defiantly buy one.

[ZeroXBreak]

What kind of wheels do you have ? Which height?

[neokregon2009]

@ZeroXBreak Small 55mm i think. I like fast hard 90a wheels. Im working on learning to slide. Eulogy wheels rip

[ZeroXBreak]

@neokregon2009 Thank you for your answer !

I asked it because I plan to buy 60 mm wheels to be faster and I thought you had doing the same because... Your wheels looked quite big :)

[swordcrasher]

frontsides are just wannabe royales, bend those legs!!!!

[neokregon2009]

@swordcrasher Yep im working on royales now. They look cool. I wanna learn them. They look safer too cause i sometimes catch an edge of my frame with frontsides and go flying.

[swordcrasher]

@neokregon2009 they're pretty easy, feels sketchy at first but you learn how to transfer your weight right soon enough

[moneypker]

frontside is the hardest for me im a backside person but frontside stall ;o lol

[swordcrasher]

dude take off the safety gear fool!!!!! u dont need that

cramps yo style

[shampooguru117]

How much do you think antirockers help I cant decide

[videoman56]

the "ledge thing" is called a C-box.

ya' mean?

[noqualms]

Thanks and good luck learning royale :)

[noqualms]

Thanks and how long did it take you to learn frontside?

[neokregon2009]

not very long.. just learn to stall then try grinding and adjust your balance so you don't fall on your butt like me lol -- good luck

[noqualms]

hi u were awesome in the video. i have a few questions to ask you. when u were doing stalls how high was your curb? And did you train everyday or??

[neokregon2009]

Thanks, I started on a low un-waxed stair step to stall then slightly grind. The stair was maybe 4- 6 inches high. I wanna learn the royale now.. You might even wanna skip the front-side grind and learn the front-side royale right from the start.

[swordcrasher]

@neokregon2009 yeahhh, nobody frontsides just go royale, that's what I did, then farvs come easy

[flowerpotproductions]

hey do u have tips for frontsides

my friend let me use his little rail and i tried a frontside on it but i slipped and fell on my ass and it hurt so bad!

when i tried em before i always slipped too ( how do u do it )

also when i tried them on ledges ( like how u did it ) my front wheels always touch the ledge... how do i prevent this?

[neokregon2009]

I learned on a low stair step that wasnt very waxed just to get the stall down with a slight slide. easier to come out fakie at first. you got to not fully be on the ledge or your wheels will bite. Its kinda scary when first learning but its actually easier if you go faster - to get the balance thing down. make your skates at least shoulder width apart so you don't fall on your butt and lean kinda forward but still slightly away from curb to match your direction of travel. -- good luck

[positivoshow]

now try the royale, frontside grinds are just a waste of time. mizu and pornstar are not my best grinds but they are my favorites

also try some 360s

[neokregon2009]

thanks for the tips and ideas. I want to learn some more grinds. I can do makios and Mizu's sometimes now and also a 360 air. I want to learn the royale. I looks cooler than the frontside for sure. I still have not mastered the soul grind but soon i hope.

[TheUltimateStuggles]

what kind of roller blades do u have

[neokregon2009]

These ones are Remz OS 3's but i got some Xjadows with freestyle frames since

[TheUltimateStuggles]

@neokregon2009 how much do those cost??

and where can i get some

[neokregon2009]

I get all mt inline skating gear from shoptask (.com) cause I am in Canada. They have tons of cool stuff and you can order it online and it comes right to your house really quick. I just got a Senete A3 back-pack too that holds my skates - Its really cool looking. There's a link to shoptask on my channel too.

[TheUltimateStuggles]

wat if i live in the US

do they ship to there

[neokregon2009]

i think so. there is a link to there site on my channel. just click on my name to get there. I think there might be a few shops in the US too. I hear there is only 2 places in all of Canada that sell aggressive skates but i dont know what the situation is in the US and other contries.

[GBcovers]

Aggressivemall is a really good place in the U.S.

I'm talking, probably the best. Anywhere.

[bestvids219]

haha I learned from just watching pros and me and my friends just looked at how they did the grinds till we were as good at them as the pros.

So many grinds you can learn

[bestvids219]

lose the helmet

[WelcomeToSF]

why...cameron card wears one because he almost died...i dont think this guy wants to go through that situation

[bestvids219]

wow...hes doing a little tiny banana ledge...hes not going to die.

[WelcomeToSF]

one big slip up even on thta ledge would hurt bad

[bestvids219]

if you die on that ledge you really blow at rollerblading

[WelcomeToSF]

i said get hurt not die learn to read

[bestvids219]

Okay...but seriously...if you broke a bone on that little thing...come on...I can understand a little scratch but nothing to really hurt yourself..at TOPS a sprain...and even if you did that you really should consider stopping rollerblading

[WelcomeToSF]

why should you consider stopping...getting hurt is part of the game

[bestvids219]

yeah but you should consider lessons

[WelcomeToSF]

haha that would be the first time i would see that i learned most of my tricks by my friends giving me tips

[PentictonRollerblade]

"Rated"

[10rrs]

cool

[SkatesInDenim]

Sweet. Is editing with Sony vegas easy to learn?

[neokregon2009]

Yep, Its not to hard and there are tons of instructional clips on using it on you-tube. You can get a free copy on lots of torrent download sites. It looks like it can do tons. The vid i made before this one had speed up and reverse stuff too.

[SkatesInDenim]

Thanks. You can download it free? Legally? lol

[neokregon2009]

no i dont think so.. but if your not making any money from it, i don't think its a big deal.

[SkatesInDenim]

Oh. Well, it's only 80 bucks anyways. I'll probably just buy it