disassembly of tx1000 tx2000 tx2 tablet pc

[ssanyeux]

I need your help, but my fan is working slower, sometimes my screen glitches and goes black , but it still seems active , i tested leaving music on, and it continues. what do you siggest or recommend? I know this vid is old. but i'm kinda broke and can't buy a new laptop yet. my concern is mostly the screen.

[KISSAproductions]

That is just what I was looking for, excellent vid!

[clubparty928]

do you know how to fix/replace the headphone plugs under the mouse, the middle one only works for me the first one is broken or it does not it stoped working. when i plug my headphones on the first hole i can't hear nothing and on the second one i can

i have an hp pavilion tx 1000

[j2anime]

Thanks for uploading. I was wondering how to remove the mother, now I know.

[taitai907]

No luck :(. Still got the black screen.

[josB5819]

just found that link you put up about replacing my tx1000. just almost a year late. -.- still. im going to do the penny trick,when that thermal compound gets here...

[tomakatom19]

what is the penny made from? there were 2 types of materials which the penny were made from

[kaestkat000]

ha that was great. so i got through all the steps just fine (i'm trying to take apart the laptop to clean out the fans...there's a lot of gunk in there) until i got to the part where you have to disconnect the microphone and camera cables below the display thing...

pretty sure the entire white thing wasn't supposed to come off was it?

...

didn't think so.

-_- fml

[saints5354]

Great video, with ur video, i able to dissemble my TX1222AU, thanks mate...



[d33ps1m4s]

Just too say that i used 1 euro cent and give 2 minutes of heat and is working just fine, good video by the way.

[amysrabbitranch]

Okay I did the black screen solution and put it all back together...now when I turn it on (tx2000) it beeps 3 times, and then only the "power" light on that trio of lights on the lower left of the screen blinks (other lights are on, but normally during booting the power light stays on, and the cd symbol light - i presume for the drives - is lit). Did I reconnect something wrong or what?

[d33ps1m4s]

@amysrabbitranch its seems memory problem...

[d33ps1m4s]

@amysrabbitranch its seems memory problem...

[d33ps1m4s]

@amysrabbitranch its seems memory problem...

[ssleslito]

excellent video !! thanks for the help !!

[tommycoolmaster]

TNX DUDE NICE VIDEO CONGRAT

[ps3isdasht]

Make sure 2 use a penny made before 1982 becasue they were pure copper!!! Great vid thanks!

[ultrablade]

great tutorial! one important thing you forgot (you might have mentioned it?) don't forget to take out the remote control! I just about broke my motherboard, who cares I was replacing it anyways. lol

[mc12121]

just finished to disassemble my HP laptop and to bake the motherboard. the laptop is alive now, but i recommend you not to buy HP laptops.

I did it with 150 watt bulb

Thank you very very much for this video!

[sp1ic3sp1ic3]

As i was watching this and was ready to dismantle my laptop when my tx1000 worked again.. Anyway i left it offline for more than 6 mths now.. Without power and was using another laptop.. Ppl u might wanna leave it hangin some where first before considering to discard it. Anyway im running a tablet cooler fan below the laptop now +i am not moving the laptop+i removed the ramm cover (for more airflow) to cool the graphic card. Hope it works if it doesnt will update here...

[mynickisjal]

@sp1ic3sp1ic3

it happened to me too :/

i also removed the painting over the cooler

[Kucurski]

Hello,I have destroyed a connector of display.

I have no screen.So please ell me what is the solution to fix it.

Thank you in advance.

[jonathangonza]

I follow your instructions to take off the monitors cable off the motherboard and the little one broke, what can I do to fix it?

[Twysthor]

how did you reattach the two wires you pulled out at 8:20? will i need a solder gun or something?

[Anotherlife2]

Thanks man for the info.

[yingjai]

i was hoping you would cover taking apart the screen.

do you or anyone who reads this know how?

i have a tx2 and there is a piece of dust/dirt beneath the screen.

it used to be fine when it was near the top of the monitor, but it migrated to the middle of the screen. it's very annoying when i'm trying to work in photoshop.

[JuanitoRocks]

did the blow dryer method work for you?

[happycoconut19]

i know this guy! yes he's a nerd but you can trust him! :D

[heavenswarrior2]

you are a nerd but if we dident have you nerds all our things would be broken

[JANtheDane]

Thank you for uploading this video. It was very helpful

[arvinguinto]

How buot tx200? the the lawsuit apply to those too?

[SnOoTyGrafferS1]

Thankss gracias a este video pude reparar mi tx2000

[kausarku]

Thank my frand...

[Hunt394]

Thanks for the video! My TX1000 runs just fine now. Came up with an extra screw though...

[abeijon100]

@Hunt394 check out the link that i put in the description, you may be able to get a free replacement netbook from the class action lawsuit

[Hunt394]

@abeijon100 Checked it out, unfortunately they require proof of purchase. It's been over 3 years, I have no idea where the reciept would be or if I even still have it. I got really excited about the whole thing, until I ran into that...

[estudianteHU]

@abeijon100 Thank you very much!!! It helped me a lot at fixing my machine.

[chips2481]

Try a copper shim to lower your gpu temps 15%. Search for "TX1000 Copper Shim" on ebay.

[major6333]

my tx2000 would not turn on. Instead, the lights would light up for (literally) a second and just turn off. I would not even hear the system running.o i have same problem??

[abeijon100]

@major6333 sounds like another more complicated problem.. :/

[maan11j]

@major6333 same here

[bdynsl]

Good Googli Goo! I recently experienced the black screen problem on the TX 200Z. I found another video on here to correct the problem, but I couldn't completely take the laptop apart. Your video along with jasonshay2's video helped me fix the black screen problem. I was skeptical at first. But when I saw that white HP symbol pop on my screen after reassembly I started dancing. I thought the damn thing would cost me a few hundred either to get it repaired or purchase a new computer. Thank you!!!

[paulb100]

@bdynsl can u link me to said video? i have it apart with black screen issue but theres no signs of burn out on the GPU or CPU

[jspath019]

Thank you!

I did my tx2000 diy fix and it worked.

If it wasnt for your vid, i would have no idea howto take the computer apart.

Thanks!

[hungrider]

um, im having a little problem taking out my wifi adpater, is it suppose to be hard to pull it out?

[abeijon100]

@hungrider after you take out both screws by where the wire connected to them, it should want to spring upwards by itself. After that just slide it out of that ram-like connector.

[hungrider]

@abeijon100 thx

[abeijon100]

@fegde

yea, that computer wasnt mine and was getting super hot too.. the while fan was blocked with a huge clog of dust

[fegde]

@abeijon100 Dude! I opened it, cleaned it with compressed air and now the fan is almost off all the time...crazy.

Thanks again.