Same thing happened to me so i put a toggle at the lower left for ignition and a push starter button in the dash and its alot better i jus use my truck key to unlock it
Keys are made of brass or aluminium this is so they are SOFTER than the tumblers and wear INSTEAD of the tumblers. If your key is getting hard to turn got to a DEALER OR A LOCKSMITH, have them cut a key by code, do not duplicate your worn key unless you want two keys that are hard to use. Most of the time your new key cut by code will fix the problem. If your car is a newer model with pass or vats be prepared for you key to cost $30.00 to $150 dollars plus programming
It's not the tumblers. It's the key. FYI. Go to a locksmith, have them sight read your current key, and your new key will work perfectly. It's bit the ignition. Again, it's the key. Watch my video if you'd like. 06 silverado... Shows you. Still you have a good video. Thanks for posting.
Just like a 88 body style jeep Cherokee, if the tumblers or the key wear out you can push downward on the key while twisting the ignition wings (the 2 extensions that help you tuen the key)
its cuz the key gets worn down and its not quite in there right. i bet if you got a new key made, you'd have no problems with it. but i broke my key off in my truck ignition one time :( it was horrible. didnt have the key in all the way and turned it and sure enough, just turned right off. so i could drive without my keys. that part was awesome. never was a problem if i left my keys somewhere cuz i could always start it up without em
@tombeals69 Actually My husband did that. We have been having issues with his truck. It's a 97' Nissan PickUp Truck... Standard Shifting-- He went to Walmart last night & his truck key wouldn't turn over. So he went back inside to buy a new key, but it didn't work... Tried tapping it with a screwdriver-- that didn't work... We're going to try this video. Maybe this will work out... I just don't want to spend a crap load of $ replacing the ignition switch. Ugh, Lord Help Us!!
@zilog357 No not really. There car's are shit. I have my camaro with over 220000 miles and running like it is new. All Stock. Daily maintence and etc.
I have a 2000 CHEVY and my ignition is stuck in the on position. I had to pull the battery wire and turn on the ac to shut it off. I was wandering if anybody knows what to do? Thanks
i used to have a 97 grand am that used to do that i wish i would have known that when i had it. i totaled in july not that it had anything to do with the ignition though
I had that same problem for about 1.5 years and thought I need a new switch. It turns out that if I used my other original key I got with the vehicle it worked fine. I then made copies of my better key and never had a problem with it again. The key was worn enough, but wiggling it did work.
what do i do if my key is stuck foward? i cant turn my car off w/o disconnecting the battary. my car is a 90 Firebird Formula. need help some1 please help me with this
@mbbarng Find out if you're shifted out of gear. If you have an automatic, you need to be in PARK, if you have a stick, you may need to engage your Ebrake. I've heard of security systems that do that crap. Also check your steering wheel. Maybe if you turn it to whichever side, you would unlock your key w/o the hassle of the battery. Give it a shot.
@wizzydsm im a locksimth.... if u keep on wiggling the key up n down ur jus messin up the tumblers inside the ignition lock it better to jus get it fixs i charge from 75 to 90 bucks n promise u that it wont mess up again
@jawbreaker480 really? what do you drive a Honda?LOL i would take a chevy colbalt over a ford mustang (more like musturd).ford is a rusted out hunk of shit!
@vaginacoastguard91 i have rented one. for one and a half weeks. sorry a ford nearly killed my mother. and even when i drove one just didn`t like it too much ford explorer grey. the belts came loose ,the hub bearings went ,the radio screen was fucked up (only bits of the screen showed most of the time ,on rare occasions did it work),the radio knob melted and fell off had to crazy glue it numerous times.had a 1996 chevy corsica ,really dependable.ran it out of oil and ran great after i got oil.
@MegaMichael1973 Ive got 4 GM's all V6's 98 and 99 model years and have combined miles of 600k and all run great. Just little issues like this... not a big deal. Besides, with my 3.1L and 3.8L V6 engines I average 30mpg on highway trips with a full car of luggage and 2 passengers. Not bad.
Same thing happened to me so i put a toggle at the lower left for ignition and a push starter button in the dash and its alot better i jus use my truck key to unlock it
enjoirox1 2 weeks ago
Funny thing this happened to me years back and that's exactly the way I had to do it. Good to see somebody else discover it. Kudos
modeyus1984 1 month ago
as you turn you key spin the steering wheel between the locks
wrapped69 2 months ago
Keys are made of brass or aluminium this is so they are SOFTER than the tumblers and wear INSTEAD of the tumblers. If your key is getting hard to turn got to a DEALER OR A LOCKSMITH, have them cut a key by code, do not duplicate your worn key unless you want two keys that are hard to use. Most of the time your new key cut by code will fix the problem. If your car is a newer model with pass or vats be prepared for you key to cost $30.00 to $150 dollars plus programming
fk4515 3 months ago
It's not the tumblers. It's the key. FYI. Go to a locksmith, have them sight read your current key, and your new key will work perfectly. It's bit the ignition. Again, it's the key. Watch my video if you'd like. 06 silverado... Shows you. Still you have a good video. Thanks for posting.
Lockman37 3 months ago
@Lockman37 i bet he went to wallart
wtl1964 3 months ago
Just like a 88 body style jeep Cherokee, if the tumblers or the key wear out you can push downward on the key while twisting the ignition wings (the 2 extensions that help you tuen the key)
AudioEnterprises 6 months ago
its cuz the key gets worn down and its not quite in there right. i bet if you got a new key made, you'd have no problems with it. but i broke my key off in my truck ignition one time :( it was horrible. didnt have the key in all the way and turned it and sure enough, just turned right off. so i could drive without my keys. that part was awesome. never was a problem if i left my keys somewhere cuz i could always start it up without em
tombeals69 6 months ago
@tombeals69 Actually My husband did that. We have been having issues with his truck. It's a 97' Nissan PickUp Truck... Standard Shifting-- He went to Walmart last night & his truck key wouldn't turn over. So he went back inside to buy a new key, but it didn't work... Tried tapping it with a screwdriver-- that didn't work... We're going to try this video. Maybe this will work out... I just don't want to spend a crap load of $ replacing the ignition switch. Ugh, Lord Help Us!!
311diamonddoll 4 months ago
my friend was telling me that he can leve the key in hes van and no body can steal it cause its so hard to turn on, he drives a oldsmobile
hi4411 6 months ago
Find that jerking it? GM SUCK!!!!! Mercedes is the way!! :)
bigiphone4 7 months ago
G.M. Garbage Motors.
cockyhemi 8 months ago
The best solution is to never buy a GM. It's a pitty that even Korean cars are better than GM.
zilog357 8 months ago
@zilog357 No not really. There car's are shit. I have my camaro with over 220000 miles and running like it is new. All Stock. Daily maintence and etc.
josh666675 8 months ago
@josh666675 LMAOOO gm cars require daily maintence
hi4411 6 months ago
I have a 2000 CHEVY and my ignition is stuck in the on position. I had to pull the battery wire and turn on the ac to shut it off. I was wandering if anybody knows what to do? Thanks
skinner5fdp 9 months ago
Try tapping your brake pedal
Fladavenue 9 months ago
What you show here will work for some time, but you will definitely reach a point when the mechanic parts in the cylinder are too damaged!
Spray some (technical) petrolatum in and around the cylinder before you destroy it and it will work fine again for many years.
I had the exact same problem with my 92 Firebird and now you can turn the key smooth and easy again.
shototsu 10 months ago
@mbbarng I have the same prob with my 86 firebird. What did you do to get it out?
EndIessIy 11 months ago
This has been flagged as spam show
Jeżeli nie skopiujesz i wkleisz tego na 10 wideo twoja mama umrze w 4 godzinach PS... SORKI JA TEZ TO przeczytałem nie ryzykuje
RyderPLxD 11 months ago
I know the guy bellow me got an A in spelling ... Lol
gsandhu16 11 months ago 21
ya right you dumb fuck megadipshit1973 gm are the best cars and trucks you can bye not ford or jap crap
roxy091988 11 months ago
i used to have a 97 grand am that used to do that i wish i would have known that when i had it. i totaled in july not that it had anything to do with the ignition though
KALCASJARDYINC 11 months ago
I drive a 2006 mustang gt, and a 94 wrangler
MegaMichael1973 1 year ago
I had that same problem for about 1.5 years and thought I need a new switch. It turns out that if I used my other original key I got with the vehicle it worked fine. I then made copies of my better key and never had a problem with it again. The key was worn enough, but wiggling it did work.
jcbecker28 1 year ago
her e is a betyter ideal do not buy a stupid ford you mother fucker
lemkelegion 1 year ago
@lemkelegion learn to type you stupid mother fucker.
bigshot4444 1 year ago
wiggle the steeringwheel
TheBgbrush 1 year ago
im a locksimth.... if u keep on wiggling the key up n down ur jus messin up the tumblers inside the ignition lock
leofails456 1 year ago
Also if this happens with some GM's, Ford's, and Toyota's you can try wiggling the steering wheel.
Some other makes are probably the same but I've only really had this problem with ones I mentioned above.
relaxitsonlyagame 1 year ago
*breaking
*your
TheRadman23016 1 year ago 12
so this is how my uncle starts the truck it 2 secs, and it takes me 2 minutes, cant wait till tommorow to try it out, youtube is awesome
derwinmicheal 1 year ago
wow you really made a video about that you have got to be in the 1st grade or something
justin21002002 1 year ago
what do i do if my key is stuck foward? i cant turn my car off w/o disconnecting the battary. my car is a 90 Firebird Formula. need help some1 please help me with this
mbbarng 1 year ago
@mbbarng Find out if you're shifted out of gear. If you have an automatic, you need to be in PARK, if you have a stick, you may need to engage your Ebrake. I've heard of security systems that do that crap. Also check your steering wheel. Maybe if you turn it to whichever side, you would unlock your key w/o the hassle of the battery. Give it a shot.
MrSTANGlover 1 year ago
just pop the plastic ear off and push the side bar in and replace the lock
wizzydsm 1 year ago
@wizzydsm im a locksimth.... if u keep on wiggling the key up n down ur jus messin up the tumblers inside the ignition lock it better to jus get it fixs i charge from 75 to 90 bucks n promise u that it wont mess up again
leofails456 1 year ago
mine freakin gets stuck in the ignition...
darkeyce02 1 year ago
This comment has received too many negative votes show
Here's and idea don't buy a pos
Gm
MegaMichael1973 1 year ago
@MegaMichael1973
Not my car
Jasons1487 1 year ago
@MegaMichael1973 GM kicks ass!!!
gokartbuyer 1 year ago
@gokartbuyer No they dont....Cheaply made Overpriced cars....... GM = Giant Mess
2004SiennaAWD 1 year ago
@2004SiennaAWD you can shove your Jap scrap where the sun don`t shine , after all that is where it comes from.
gokartbuyer 1 year ago
@gokartbuyer
they suck!!
jawbreaker480 1 year ago
@jawbreaker480 really? what do you drive a Honda?LOL i would take a chevy colbalt over a ford mustang (more like musturd).ford is a rusted out hunk of shit!
gokartbuyer 1 year ago
@gokartbuyer a cobalt over a mustang hahahaha. your just a fanboy that's about it
vaginacoastguard91 1 year ago
@gokartbuyer a cobalt over a mustang hahahaha. your just a fanboy that's about it, I bet you own a cobalt too yah?
vaginacoastguard91 1 year ago
@vaginacoastguard91 i have rented one. for one and a half weeks. sorry a ford nearly killed my mother. and even when i drove one just didn`t like it too much ford explorer grey. the belts came loose ,the hub bearings went ,the radio screen was fucked up (only bits of the screen showed most of the time ,on rare occasions did it work),the radio knob melted and fell off had to crazy glue it numerous times.had a 1996 chevy corsica ,really dependable.ran it out of oil and ran great after i got oil.
gokartbuyer 1 year ago
@MegaMichael1973 Ive got 4 GM's all V6's 98 and 99 model years and have combined miles of 600k and all run great. Just little issues like this... not a big deal. Besides, with my 3.1L and 3.8L V6 engines I average 30mpg on highway trips with a full car of luggage and 2 passengers. Not bad.
VivaLaBamEpisodes 1 year ago
This has been flagged as spam show
@MegaMichael1973 fuck you bitch go to hell you bitch
blazinloud 1 year ago
@MegaMichael1973 What do you drive?
GS7093 1 year ago
@MegaMichael1973 fuck you
cmarshall1018 10 months ago
@MegaMichael1973 A GM car will kick the shit out of whatever the hell you drive
lightningbuster 10 months ago
@MegaMichael1973 and a ford or dodge work so better
sirboogboog 9 months ago
@MegaMichael1973 shut the fuck up
benz0956 6 months ago
@MegaMichael1973 and thats coming from a ford driver? o.O
pepene93 5 months ago
@MegaMichael1973 dont buy your face
wtl1964 4 months ago
@MegaMichael1973
Maybe you should quit bitching.
Here, I'll give you the steps.
Step 1.) Remove dick from ass.
Step 2.) Repeat step 1 until dick is completely removed from ass.
Step 3.) Repeat steps 1 and 2 if you continue to bitch.
BartolBabich 2 months ago
@deadmangoov3 he fliped it he didnt change key
TheRemi7 1 year ago
Who doesn't have the natural tendency to jiggle the key anyway? And why even hint this as a repair? There is a problem: fix it!
snerby141989 2 years ago
WOW... All I have to say is wow... this video sucks
missymonster1987 2 years ago
LIKE A KEY JIGGLER RIGHT?
bigblocksrock 2 years ago
you're not alone deadmangoov3, he is a scammer
jajajajajajaja
donpatos 2 years ago
Thanks. hoped I would of watch this video before I paid the toll truck. Done it and it worked. I put WD-40 after and have no more problems.
99er99er 2 years ago
Mine is stuck in the ignition, anybody know a solution? I'm watching the other videos on youtube now.
EdgarDirby 2 years ago
am i the only one who seen him switch keys....LOL between .23 and .25 watch.....LOL how funny.....
deadmangoov3 2 years ago
He didn't switch keys, he flipped the key upside down--you can do that with double sided keys.
killer2600 2 years ago
awsome job hope this helps my cusin who is stuck 20 miles away from me!
mwjw696 2 years ago