Hey I followed everything you did perfectly, and I'm also aware of how to port forward and all that good stuff on my own. The only thing I'm having trouble with is the 3074 port it keeps saying this port is already in use, and when I check it out I see that my PS3 is using it and I'm not sure how to change it so my Xbox can use it.
when i put in 192.168.0.1 nothing loads, when i foned BT i get told to put in 192.168.1.1 n it loads the netgear site no problem BUT this is where i have the problem.....where as you have the 9 options to choose from in the ADVANCED section, i only have 7 n portforwarding and porttriggering are not there to choose from.
ok im using a westell gateway and it says global port range and i out 3074 and in the 2nd box 3074 then it says base host port and i dont know what to put on there but it lets me add 5 numbers to it, and then after it says protocol which do i have to click on TCP or UDP?
Me and my Brother Both play Xbox live, However, I have performed all of these steps and For the first day We both had Open Although the following day He had Strict and we cant seem to fix it Please Help
okay i try to connect xbox live with wirless then it say utm to low so i called xbox they sent to netgear they told me i need to open port the gave me numbers i made 4 ports they say i need to ope all of em i could only check idk wat the fuck to do plz help me im also trying to upgrade touter
help my connection has been crap for the last weak or so. When i go on Mw2 it says my nat is open but then i play and i have crazy lag. so i looked into port forwarding. Did every thing you did here.
my settings are
1 xbox1 TCP/UDP 88 88 192.168.0.4
2 xbox2 TCP/UDP 3047 3047 192.168.0.4
the Upnp is on
the only thing i dont have is the DMZ on when i do it shut off my internet all the way. my xbox setting are manual and match up im getting a yellow triangle when i test it
i might want to add on about the triangle thing. i use wirless and i have four bars and it connects to the internet and then xbox live but it pops up and error about my nat being moderate. i have double checked all my setting over and over does if any one has any ideas help me out
@slackerfish19 put your xbox settings to auto. check the IP address your xbox assigns you, and use that for your router settings. Manual messes things up.
hey! will this make it so i can connect 2 xboxs to the same router. cuz iv been having ALOT of trouble with that and i cant get it to connect so if this is the solution please tell me. and if it isnt please tell me some way to make it work. this is the only video iv found with the same router as me. thanks!
i did this but it wont show what i made and when i start the game i am automatically signed out of live and cant change it back!
corknakovastein 3 weeks ago
where do you get your password and username?
many9161 1 month ago
my router site dosnt look like that and i dont know the password what should i do ?
LotteSnogdal 3 months ago
Thanks !! Gonna try this, thanks alot mate.
KevinraZer 3 months ago
I wanna kiss you! ITS FINALLY OPEN!
chasepuck 3 months ago
Hey I followed everything you did perfectly, and I'm also aware of how to port forward and all that good stuff on my own. The only thing I'm having trouble with is the 3074 port it keeps saying this port is already in use, and when I check it out I see that my PS3 is using it and I'm not sure how to change it so my Xbox can use it.
ThexKingxAKAxEliTe 6 months ago
You didn't mention anything about a static IP...Really?
allredhead 6 months ago
What is the best mode and channel for Europe?
xCammeister95x 7 months ago
Could I open ports for 2 xboxes on the same router?
werefett 8 months ago
holy shit NICE screen cam
sybaright 8 months ago
Thanks man, worked like a charm.
bops44 8 months ago
portforwarding is not there for me
manurule98 9 months ago
wat the f###
TheMrandrew1 9 months ago
finally someone that has my same router
OJmastersz 10 months ago
when i put in 192.168.0.1 nothing loads, when i foned BT i get told to put in 192.168.1.1 n it loads the netgear site no problem BUT this is where i have the problem.....where as you have the 9 options to choose from in the ADVANCED section, i only have 7 n portforwarding and porttriggering are not there to choose from.
any ideas??
perkyyy90 11 months ago
a hell of a lot easier than configuring port forwarding. I'll see how this works when my daughter gets home. Much appreciated!
jw69922 11 months ago
@robot4513 try disconnecting ur router then ur modem
connect ur modem and wait a while for it to be connected
then connect ur router and go do a check on ur xbox live connection to see if the yellow triangle comes out or not
malteckfirewind 1 year ago
This has been flagged as spam show
when i try to do the 3074 one it says port service conflict? help!
XconTheOnlyOne 1 year ago
is there any point in port forwarind if you have an open nat type
SoTChaos 1 year ago
IM FUCKIN ANGRY ALL THESE VIDS TELL THE FUCKIN SAME! MY NETGEAR ROUTER ANCIENT SO THE FUCKIN STUFF IS AT THE TOP AND THERES ONLY PORT TRIGGERING
YOURS IS NETGEAR SMARTWIZARD MINE IS FUCKIN PROSAFE GHHHHHHHHHHHHHHH
xboxgamernerdz 1 year ago
@xboxgamernerdz Upgrade your firmware.
RogueKovu 1 year ago
IM FUCKIN ANGRY ALL THESE VIDS TELL THE FUCKIN SAME! MY NETGEAR ROUTER ANCIENT SO THE FUCKIN STUFF IS AT THE TOP AND THERES ONLY PORT TRIGGERING
xboxgamernerdz 1 year ago
thanks man can you make a vid on setting up dmz with netgear?
srjustinjustin 1 year ago
How come I don't have that sidebar of options on the left side of my screen? All I have is the Basic Settings page.
OgnarPliskin 1 year ago
This has been flagged as spam show
For some reason, mine doesn't say 'Connect automatically when needed' ?????!?!?!
SlurpiedHD 1 year ago
Can anyone help me i lost my username and password?
XxALLxCODxFOREVERxX 1 year ago
Can you have a UPnP on if you have a DMZ set on your Xbox's ip address at the same time..Much appreciated friend.
masterchiefgamer123 1 year ago
i have a netgear modem but my gateway is 10.0.0.1 and my ip is 10.0.0.1 aswell. does it matter? cos my portforwarding isnt working.
LegendarySenzu 1 year ago
I got... Port conflict with other service. when i tried this, i have the start port 88 thing...
TwiTClan 1 year ago
what if hackers steal your account ... if you do this.
TERMINATOR2452 1 year ago
Comment removed
TERMINATOR2452 1 year ago
Do i need to setup a static IP for this to work bro?
grulkesam 1 year ago
@grulkesam yes..type 192.168.1.1 in your browser and if it brings you to your router login page then....
in system->network manual settings
ip: 192.168.1.15
dns: 255.255.255.0
gateway: 192.168.1.1
it sets most of it up for you anways..
ModernWarfareBooster 1 year ago
link doesnt work
oceanside2010 1 year ago
This has been flagged as spam show
what does extended security mean
Jyhle 1 year ago
ok im using a westell gateway and it says global port range and i out 3074 and in the 2nd box 3074 then it says base host port and i dont know what to put on there but it lets me add 5 numbers to it, and then after it says protocol which do i have to click on TCP or UDP?
lilbfeo 1 year ago
Okay Hear me-
Me and my Brother Both play Xbox live, However, I have performed all of these steps and For the first day We both had Open Although the following day He had Strict and we cant seem to fix it Please Help
iexpertgameri 1 year ago
7,5 thousand views, 5 likes and 2 dislikes...
siggisaggamund 1 year ago 2
okay i try to connect xbox live with wirless then it say utm to low so i called xbox they sent to netgear they told me i need to open port the gave me numbers i made 4 ports they say i need to ope all of em i could only check idk wat the fuck to do plz help me im also trying to upgrade touter
thebestanthe3rd 1 year ago
how come everyones netgear login page is different to mine and has more options. i dont have the port forwarding option ?
NotTheEnglishAverage 1 year ago
@NotTheEnglishAverage you probs have a older/newer version OR you dont even have a netgear router
ThemMHeroes 1 year ago
@ThemMHeroes its ok now i got it fixed. Im not sure why i had a different page but it was netgear.
NotTheEnglishAverage 1 year ago
i dont have the port forwarding option under advance
imadude55 1 year ago
help my connection has been crap for the last weak or so. When i go on Mw2 it says my nat is open but then i play and i have crazy lag. so i looked into port forwarding. Did every thing you did here.
my settings are
1 xbox1 TCP/UDP 88 88 192.168.0.4
2 xbox2 TCP/UDP 3047 3047 192.168.0.4
the Upnp is on
the only thing i dont have is the DMZ on when i do it shut off my internet all the way. my xbox setting are manual and match up im getting a yellow triangle when i test it
slackerfish19 1 year ago
i might want to add on about the triangle thing. i use wirless and i have four bars and it connects to the internet and then xbox live but it pops up and error about my nat being moderate. i have double checked all my setting over and over does if any one has any ideas help me out
slackerfish19 1 year ago
@slackerfish19 ur upnp has to be enabled
MrRicanPapi21 1 year ago
@slackerfish19 put your xbox settings to auto. check the IP address your xbox assigns you, and use that for your router settings. Manual messes things up.
ContrailKid 1 year ago
@slackerfish19 hey i have the same problem. did you ever get that fixed? if so, what did you do?
ven0IVI 1 year ago
hey! will this make it so i can connect 2 xboxs to the same router. cuz iv been having ALOT of trouble with that and i cant get it to connect so if this is the solution please tell me. and if it isnt please tell me some way to make it work. this is the only video iv found with the same router as me. thanks!
JesusSmokinBlunts420 1 year ago
Is it only for Xbox,? what about PC..
JokerArmy1 1 year ago
i have tried Password: password, and admin but i cant log on?! Please help me
AlekNo95 1 year ago
how do i find oty password?
blinkava44records 1 year ago
The internet changes doesnt change or do it ?
bayen97 1 year ago
how do you enter 3074 it will not let me . and how do you know what you local ip is.
FULLSNIPER324 1 year ago
i posted the steps in the info pane. cheers.
ContrailKid 1 year ago
@ContrailKid it says the specified ports are being used, how do i fix that?
randomvideosforjoo 1 year ago