i bet artist hate you lol.. its cool though man.. thanks for all the tips! i used to get shut out when i started by other artist.. they were complete dicks... your just spreading the joy man haha. thanks!
to the ones asking about y he paints it white and if it hides detail, please may i just clear it that he paints the back of the paper white, mostly because this paper has a uniform colour, so the white helps to prevent adhesive colour and basecolour showing through, to support my answer you can at 1:57, the bil mostly to the right can be seen at 2:04 turned around :)
Did you watch videos to just to ask what the name of the Stupid ass song is,....or are you really interested in the tricks of the trade. MO MO,,,,,,DAH!!!!!
if I wanted to have the say dollar notes popping out like 3d style could I just use thick paper< I want to make it so my deign comes out from the background so it looks like it has sort of an "outdent" as opposed to an indent lol?
I am having trouble finding good quality photos of the bills can you provide a link to a good photo I would like to try this because it looks cool and go’s good with something I have been working on.
I'm a hunter. Can I use the "Rice Paper" technique to lay down a hunting montage on my pick-up with out having to remove my vehicle's existing finish?
oneslowride.. did it rinkel on the light coats of clear? cuz some clears have to be put on super light coats. and TWO make sure the paints fully cured B4 clearing, what clear are you useing.
do you have to spray them with white? and what dose the white spray paint do? it looks like you just dust them. im just worried about loosin all the detail.
how come you dust the bills with white spray paint B4 ?? it looks like you loose the detail when you add the white. dose the detail come back when cleared ?? love the vids and "F" the haters. they allways come out when your doin better then them.
I tried just like u did n da video everything went well but as I let the car sit out n the sunlight the bills seem to shrink I put dupont clear over them
how do you get the green clear flames on the black when i tried it you couldnt see the green what paint do you use just before the green is applied?????
Hey we're trying to do this using tracing paper like the one you used in your video, but it seems to crinkle up when we spray the clear coat. Any suggestions?
@WAubD Maybe you had some air bubbles in your paper when you set it down on your project and when you painted on it the paint dried and where the air bubbles were at they crinkled up. Just a guess.
@revellmodels if you download the trial of photoshop and copy the image of the dollar bills and open them in photoshop there is an ability to warp the image. That should easily help you to attain the correct image you'd like. :)
@MrZiggy1979 had to sand it all off & start over ....just ended up repainting the whole hardhat the same color then getting the design printed on vinyl ,cut it out as a masking stencil because it was so complicated then i just sprayed white pearl inside the stencil,peeled it off & cleared it--the whole process with the rice paper was a pain & didn't work out for me....it cost me $ & time that was just thrown away, guess it's something you have to master before you do it for a customer
@dough957 You should never attempt to offer a service for a paying customer something you have never done or have not yet mastered or preformed several times! It makes you look stupid and 99% of the time you lose money! If you cannot afford the paint to practice you should not be even be doing this for pay. It seems to me you are bitching at hem for your mistake you should only post positive remarks unless what is shown is bad! and it is not.
@HGCGamersClub i agree with you 100%. i don't paint hardhats or helmets or do airbrushing for a living nor anything for that matter but i am good at painting cars thats why he asked if i could try to do it & i agreed as long as he paid for materials--the bully dog & tape was cheap but the automotive kandy is not cheap at all neither is the clear coat so basically i paid to paint the hard hat but in the end it turned out good i just wasn't able to get this trick to work for me
instead what happend was i put it on & it wouldn't stick --it kept peeling off ,then i got it to stick & you could still see the rice paper very clearly & it didn't disolve like i thought it would i did everything i could to fix it but it looks like ish so now i have to sand it back down & redo all the layers of candy because it's no way to match the paint--im not giving up yet but i need to have it finished within 2days---do you have any tips on getting this to work smoothly
i need help asap......i can paint cars but can't airbrush to save my life---i took on a job of paint a hardhat after how easy this trick looked in your video-- my plan was to use a candy paint do multiple coats then print out the emblem/decal on rice paper stick it on spray another coat of candy over it & the rice paper would just kinda disolve into the paint & ink on the paper would be a shade darker than the rest of the helmet & when i cleared it no one would be able to tell i used rice paper
great vids ! ur smart you catch the harder parts of what u do and make it easy in a sense . great . i like watching ur videos cuz there good and easy to watch . im mkain some vids of what im doing for paint and its not the good editing like you got but its workin out .
Im surprised the clear doesnt hurt the print on the dollar bills like make the ink run. Is it a good idea to barley mist on the first coat of clear?Or does the green paint over the bills kinda seals the printing ink so it doesnt run?
@AirbrushTricks you should do this for a living because you are spot on the money i am going to try this technic on my rifle stock but with £50 notes keep up the great work and keep working on that dancing lol
Basically decoupage I would think. Interesting. Never really thought about it for these types of applications. Nice tip. I do have to agree, though that the intro is kinda cheesy. But to each their own.
Excellent video Tony. Don't let some stupid comments change your style. You have your own style and it's funny and educational. I really appreciate your efforts in bring us this videos. People like you raise the value of the Internet. Thanks for your excellent job. If other people don't want to see or hear, go ahead and look others videos!! Music is awesome for this vid!!!
Shittest music ever, you sound about 10 and you dedicate your life to spraying paint on bits of junk, Im guessing you come from a poor home and you were probably raised by a 20 year old slag living in a whorehouse due to the fact that you find things like this 'awesome'. Get a proper job, get an education, and please get a better taste in music.
@Twiggerz95 i agree about the music, its shit... and tony talks like a fuckin cockhead. but , he is good at what he does, so nice one tony.... what is a propper job anyway???......takin it up the arse like you twigger, for £10 a shot????....
im not even going to begin to describe the level of douche that intro hits... but what i am going to get into is how putting paper between your paint and clearcoat is going to lead to ridiculous problems in the future on a vehicle. dont try this at home kids. unless you are prepared to junk whatever it is you did this to.
@AirbrushTricks as a 15 year painter, i can tell you that if its not paint, intercoat clear, flake, pearl, or candy, its got no business between your basecoat and clear coat. rice paper or not. now this may fly for test panels or xbox shells, you do that to a car and you WILL be redoing it later. would hate to see your car peeling up because some rice paper got between it. just my experience bro. just because it works in the present, doesnt mean it will work down the road. costly mistake.
@godofm3tal1 My sister has a rice paper image on the tank of her cycle that's been there almost 20 yrs and it's still like new, and it sees plenty of exposure to outside sun and weather. We had a Suzuki MC years ago that had vinyl striping from the factory on the tank under the clearcoat and when we sold it at 10 yrs old it was still perfect. Of course the clearcoat has to be good quality unlike the clear t hat automakers use that dries out and flakes off in 5 yrs.
@rhblakeman thats a motorcycle... A: those things rarely see daylight for most people, and when they do, its for short times before put back in their garages. people also take very good care of their bikes. especially with custom finishes. and its also just one image, which is still a weak link in the otherwise solid chain, but not "guaranteed to fail"... nothing is guaranteed.. but anything that is not a paint product is considered a "contaminant" and "could" affect longevity.
@rhblakeman funny, ive heard similar claims about the Maaco $300 specials. unfortunately, they too were over an internet connection incapable of furnishing substantiated proof of their claims. if youre telling me a clearcoat is supposed to last 20 years of baking in the sun every day, id like to know who produces the clear you use. because even PPG doesnt boast that kind of performance...
@rhblakeman dude, if i was trying to create trouble, i could do it in many different places in many different ways besides coming on here and having a ridiculous and unproductive internet debate with people who obviously have no idea what they are talking about. ive been doing this for a long time. i do this to pay my bills and put food on my table. im not saying its a terrible idea for a fun project, or that it wont fly, im just saying dont try this with something expensive.
@rhblakeman its advice... take it, leave it, those are your choices... bitching about why im giving it is not an option... ive watched a lot of this guys vids, and this was the only one ive left a really concerned opinion on. lots of his shit is good. and hes a talented artist. but his methods are somewhat unorthodox in a professional automotive field. no doubt from lack of tools/products/experience. like wet sanding using circular motions... but i had to chime in on this.
@VelezJ20 I just used spray adhesive because this is a small project. You don't want to use any outside chemical on a big job cause it coul cause problems.
@AirbrushTricks A shot of clear coat down on the base and set the rice paper into/onto it works good but you have to be careful where you put your fingers to prevent damage to the base paint and dirty prints in the paint, plus you need to use a stippling brush to work it down to get the bubbles out. Let the clear coat you put on as adhesive to get really sticky then you can overcoat with the first wetting coat over the top. No foreign adhesives used that way and no interaction with the paints
@AirbrushTricks a ok and what recomond for a big project cause im planig on painting my truck and i would like to try it out precciate the advise by the way keep it up
I've been using waterslide inkjet decal paper for a while now and it's soooooo much easier to hide as it's super super thin and no worries of it lifting if the adhesive fails during highlight brushing. Rice paper is the same paper they make cigarette papers from, it is very fragile and if you arent careful it will jam in your printer. Waterside is on a paper backing that comes off when you soak it in water just like decals that come with model kits.
@AirbrushTricks You have to consider the background when you do waterslide. With the bills you have you have being a light green background you should be able to get the background to stand out. There are occasions that you have to use an alternate, I've had to do the same with tee shirt transfers before they came out with transfer paper made for dark shirts (has a white layer already to print on). Everything has variables as you know so having 4 or 5 ways of doing things is best, and thin.
Hey Tony! Are you wacked man? Everytime I see you in these videos your pupils are Gigantic!! Huge! And do you think you could have pointed at the camera a couple more times within the last 10 seconds before the credits? lmao.
@Gumbie2009 The wet sand on the first few coats (after it hardens) is just to smooth the spray and dust out so you're only working the outer surface, you aren't trying to take the clear coat layer off at all. Mainly to smooth the coat so the next coat goes over a smooth surface otherwise the next coat makes the defect show even more. Satin or matte you still need to flatten the under coat with wet sanding and the final should be unsanded.
i bet artist hate you lol.. its cool though man.. thanks for all the tips! i used to get shut out when i started by other artist.. they were complete dicks... your just spreading the joy man haha. thanks!
JDizzle45fizzle 3 days ago
whats the name of this song?
username012345678101 1 week ago
was that the back side of a clothes dryer???
ZBHampton 1 week ago
These videos are great! Shame about the music!
TheOllyj 2 weeks ago
to the ones asking about y he paints it white and if it hides detail, please may i just clear it that he paints the back of the paper white, mostly because this paper has a uniform colour, so the white helps to prevent adhesive colour and basecolour showing through, to support my answer you can at 1:57, the bil mostly to the right can be seen at 2:04 turned around :)
69tony12 2 weeks ago
BRO YOU THE BEST!!!!!!!!!!
MBCustoms1 2 weeks ago 2
Would that work on an Xbox 360 controller?
novastinks 2 weeks ago
Yeah wats the name of the song
tony855k 2 weeks ago
whats the song called
miniboy53 3 weeks ago
Why are you whispering?
afar1 1 month ago 4
Did you watch videos to just to ask what the name of the Stupid ass song is,....or are you really interested in the tricks of the trade. MO MO,,,,,,DAH!!!!!
orngwhp71 1 month ago
if I wanted to have the say dollar notes popping out like 3d style could I just use thick paper< I want to make it so my deign comes out from the background so it looks like it has sort of an "outdent" as opposed to an indent lol?
J3TPILOT1991 1 month ago
This has been flagged as spam show
great job:
you wont believe this video:
search: Body Painting Snake Man HQ - Dean Kleven
deankleven 2 months ago
someone must know the nameof the song, ive looked up the dj but cant find anything!
goldsgym1244 2 months ago
@goldsgym1244 Its caledd" What youd hear in a gay nightclub Song"
colejoshrocks 1 month ago
@colejoshrocks ive never heard that in a gay night club b4! and learn to spell ffs
goldsgym1244 1 month ago
@goldsgym1244 You must hang out in a lot of gay night clubs.......
DavesKustoms 1 month ago
wats the name of the song at the beginning ?
goldsgym1244 2 months ago
I am having trouble finding good quality photos of the bills can you provide a link to a good photo I would like to try this because it looks cool and go’s good with something I have been working on.
HGCGamersClub 2 months ago
Hey Tony:
I'm a hunter. Can I use the "Rice Paper" technique to lay down a hunting montage on my pick-up with out having to remove my vehicle's existing finish?
rjsmuzik 3 months ago
Sir, is the paper used for the money printer on what i usually call tracing paper? i dont know what is rice paper....
somwk 4 months ago
@somwk if you watch the vid you can see the paper is also called tracing paper. it sez trace on the packet at the beginning :D
goldsgym1244 2 months ago
super d-bag
CANSRONES 4 months ago
whats a good paint, thats better then createx? the more i use it, the more i hate it!
idealsiver 4 months ago
Real ballaz would use real $100 bills.
Jennykaitify 4 months ago
oneslowride.. did it rinkel on the light coats of clear? cuz some clears have to be put on super light coats. and TWO make sure the paints fully cured B4 clearing, what clear are you useing.
idealsiver 4 months ago
I tried this and my money laid down nice and flat till i cleared it. Then it wrinkled up. Any idea's? I even dusted on the first 2 coats.
oneslowride 4 months ago
do you have to spray them with white? and what dose the white spray paint do? it looks like you just dust them. im just worried about loosin all the detail.
idealsiver 4 months ago
how come you dust the bills with white spray paint B4 ?? it looks like you loose the detail when you add the white. dose the detail come back when cleared ?? love the vids and "F" the haters. they allways come out when your doin better then them.
idealsiver 4 months ago
where do you get those shapes of the bills? And where do yu get the rice paper. I cant find either.
Thanks
62imperial62 5 months ago
This has been flagged as spam show
@62imperial62 photoshop
Generalvaldez 5 months ago
How did you copy the bills in those deformed shapes and what type of paper did you use?
thanks, brian
62imperial62 5 months ago
@62imperial62 Photoshop.
Generalvaldez 5 months ago
was just wonderin what size air tank you use for your spray gun for the clear in this
AlphaM0dZ 5 months ago
what are u sand it down with 800 grid
hefty88 5 months ago
why did i feel like i was on acid or he was gunna punch me the whole time?? lmao
erikguzzy 5 months ago
im doing this on some atv plastics can i use clea coat in a can ?
Jeffy826 5 months ago
I tried just like u did n da video everything went well but as I let the car sit out n the sunlight the bills seem to shrink I put dupont clear over them
MrMrbigblock 5 months ago
awesome! I cant wait to try this on a rc airplane.
bdarnell1966 5 months ago
how do you get the green clear flames on the black when i tried it you couldnt see the green what paint do you use just before the green is applied?????
mds13696 6 months ago
wow, I always wondered how the use of dollar bill images were used in murals. It just looks to intricate to be painted.
chevelle396guy 6 months ago
wicked man check out church of the dark side baaaaangingggg bunnnggg
011001er 6 months ago
Thanks! good videos help alot.
ramonals 6 months ago
Thats AWESOME
aid2003 7 months ago
that's a very handy tip indeed, thanks for all the videos you've provided and I'm looking forward to seeing more in the future (top man!)
iknowallyoursecrets 7 months ago
watch me videos,and giveme your opinions,thanks tony,i learn much with you tutorials
supercolorsautobody 7 months ago
Hey we're trying to do this using tracing paper like the one you used in your video, but it seems to crinkle up when we spray the clear coat. Any suggestions?
WAubD 7 months ago
@WAubD Maybe you had some air bubbles in your paper when you set it down on your project and when you painted on it the paint dried and where the air bubbles were at they crinkled up. Just a guess.
ichigorox90 7 months ago
what airbrush gun are you using
number1airsoftsniper 7 months ago
what's this song ?
buck40k 8 months ago
This comment has received too many negative votes show
gayest music EVER FUCK OFF AIR BRUSH TRICKS U SUCK
SuperBobo228 8 months ago
Hey man where did you get the pictures of the money? Your work is real cool!!
rbcaznow 8 months ago
Wish you guys lived closed to Belgium so you could make one for me =( I never done this but looks awsome...
TheAdemptio 8 months ago
this it's just super nice but one question i can't find any pictures of those dollar bills on google or somthing like that, can you help me???
revellmodels 8 months ago
@revellmodels if you download the trial of photoshop and copy the image of the dollar bills and open them in photoshop there is an ability to warp the image. That should easily help you to attain the correct image you'd like. :)
kjsstanley7 8 months ago
@revellmodels just type in google pics 100 dollar bills floating and you find a lot of those
largedude00 7 months ago
can you do this on a canvas
killapapi13 8 months ago
thanks for keeping it inspiring, great work!!!!
STARMedic28 9 months ago
Is there anyway you could send me a link for the 100$ trick picture
MrJmann17 9 months ago
Hey I am a total noob.
What does clear coat do?
Zaper692 9 months ago
@Zaper692 its a protective seal and it makes it glossier.
gabrielstangel 9 months ago
What kind of spray glue did you use?
JonMJ 9 months ago
Sweet vid brother
RideFate 10 months ago
How did you make those copies in the distortion?
62imperial62 10 months ago
awesome trick as usual. any tips on airbrushing a blow out? like a big bullet hole but 3d ing out.
623pepe 10 months ago
@MrZiggy1979 had to sand it all off & start over ....just ended up repainting the whole hardhat the same color then getting the design printed on vinyl ,cut it out as a masking stencil because it was so complicated then i just sprayed white pearl inside the stencil,peeled it off & cleared it--the whole process with the rice paper was a pain & didn't work out for me....it cost me $ & time that was just thrown away, guess it's something you have to master before you do it for a customer
dough957 10 months ago
@dough957 You should never attempt to offer a service for a paying customer something you have never done or have not yet mastered or preformed several times! It makes you look stupid and 99% of the time you lose money! If you cannot afford the paint to practice you should not be even be doing this for pay. It seems to me you are bitching at hem for your mistake you should only post positive remarks unless what is shown is bad! and it is not.
HGCGamersClub 2 months ago
@HGCGamersClub i agree with you 100%. i don't paint hardhats or helmets or do airbrushing for a living nor anything for that matter but i am good at painting cars thats why he asked if i could try to do it & i agreed as long as he paid for materials--the bully dog & tape was cheap but the automotive kandy is not cheap at all neither is the clear coat so basically i paid to paint the hard hat but in the end it turned out good i just wasn't able to get this trick to work for me
dough957 2 months ago
Can I use normal printer paper?
GuitarMaster268 10 months ago
what kind of air brush do you use
victor111262 11 months ago
Where can i find a photo like the one you used for the 100's?
MissMiranDuhh 11 months ago
what paint did you use
MrOrange30301 11 months ago
bunch of internet rambo's always talkin shit,why did u even watch these videos if u know more than him?lil bitches good job bro,nice tutorial.
marshalldoss 11 months ago
Is that ableton in the background? Also whats with all these haters comments, keep doing what your doing mate, cause its interesting!
TheNextLane 11 months ago
question man.. were do i go to find the 100 dollor bill online
MrZiggy1979 11 months ago
@MrZiggy1979 the 100 dollor bill image is in google
hefty88 11 months ago
any websites you can point us to where we can get those graphics ? you can spend a lot of time looking and just find mediocre graphics.
cutandweld67 11 months ago
Brilliant!!! extremely clever, this will help my business out tremendously! thnx sooo much
perezjosephb 11 months ago
this is amazing.i love hardstyle 2.wats the song
HSN1800 11 months ago
instead what happend was i put it on & it wouldn't stick --it kept peeling off ,then i got it to stick & you could still see the rice paper very clearly & it didn't disolve like i thought it would i did everything i could to fix it but it looks like ish so now i have to sand it back down & redo all the layers of candy because it's no way to match the paint--im not giving up yet but i need to have it finished within 2days---do you have any tips on getting this to work smoothly
dough957 11 months ago
i need help asap......i can paint cars but can't airbrush to save my life---i took on a job of paint a hardhat after how easy this trick looked in your video-- my plan was to use a candy paint do multiple coats then print out the emblem/decal on rice paper stick it on spray another coat of candy over it & the rice paper would just kinda disolve into the paint & ink on the paper would be a shade darker than the rest of the helmet & when i cleared it no one would be able to tell i used rice paper
dough957 11 months ago
@dough957 hey bro what was the out cum on it..? did you fix the problem
MrZiggy1979 10 months ago
5:16 epic
Josewazheretoday 11 months ago
great vids ! ur smart you catch the harder parts of what u do and make it easy in a sense . great . i like watching ur videos cuz there good and easy to watch . im mkain some vids of what im doing for paint and its not the good editing like you got but its workin out .
KTCustomz 1 year ago
Im surprised the clear doesnt hurt the print on the dollar bills like make the ink run. Is it a good idea to barley mist on the first coat of clear?Or does the green paint over the bills kinda seals the printing ink so it doesnt run?
woodzo40 1 year ago
The most disgusting music I have ever heard. The music makes the video unwatchable !!!!
korbinjennings 1 year ago
THOSE SNEAKY BASTERDS!
latestRCz 1 year ago
It's Peter Brady from The Brady Bunch! :-p
Another great video. Thanks for making it! :-D
jublywubly 1 year ago
Who makes the two part clear coat that your using in this vid? Is it something that can be sprayed thru an airrbush?
roy816tube 1 year ago
Congrats Tony
Used ur techniques and stated making some side money.
Did some x boxes and even some old playstation 1's.
Thanks
28dally 1 year ago
GREAT MUSIC WHAT I LOVE HARDSTYLE AND AIRBRUSHING!!!!!!!!!!! ; ]
and for those haters and trolls, he has a life and is probably earning more money than you could ever make!
DjShuffleKid 1 year ago
@DjShuffleKid Not really. I don't make any money doing this stuff. I have a regular job. I just airbrush for fun and as a hobby.
AirbrushTricks 1 year ago 14
@AirbrushTricks Too good for you to do it just as a hobby. You could definitely make some money doing this stuff, Diggin the video tutorials Btw!
MayhemMedia603 11 months ago
@AirbrushTricks you should do this for a living because you are spot on the money i am going to try this technic on my rifle stock but with £50 notes keep up the great work and keep working on that dancing lol
dannyjw123 10 months ago
@DjShuffleKid Meh, maybe he should make some dupe vids with some filthy dubstep, instead. Id dig that.
Postghost 11 months ago
@Postghost OH YES!!! nice idea ; ]
DjShuffleKid 11 months ago
@DjShuffleKid HARDSTYLE and AIRBRUSHING!!!!...my day is totaly made
maddtaggz 4 months ago
nice headseat
jimoivez 1 year ago
Whats the song?
MGOFadeToBlack 1 year ago
can u give me a link to what exact paper u use?
4realskillz 1 year ago
Stop being a douche with the intro. Just get to the point instead of dancing around like a fagtard.
BrokeWinger111 1 year ago
so all you are really diong is gluing the image to the project and then the paint and clear coat acts as a sealer?
somekid725 1 year ago 2
that fuck'n crazy man am doing that shit to my side mirrors
hefty88 1 year ago 6
wats the name of that song again ?
aimeedogg 1 year ago
ok now this is important on any video, make sure the music is at least three times louder than the narrator.
captaindrywall 1 year ago 7
@captaindrywall LOL...Yeah, I'm tweaking the audio settings. You never really realise how loud it's gonna be until you finish.
AirbrushTricks 1 year ago 4
@captaindrywall Im Dr.Drywall and yeah i agree ditch the flipin techno and the voulume
CobainsGirl67 10 months ago
@captaindrywall Im Dr.Drywall and yeah i agree ditch the flipin techno and the volume
CobainsGirl67 10 months ago
like this ;)
GeorgtheMASTER 1 year ago
Basically decoupage I would think. Interesting. Never really thought about it for these types of applications. Nice tip. I do have to agree, though that the intro is kinda cheesy. But to each their own.
DeathDealer2469 1 year ago
Twig WFT? Why the hate?
Tony thank you for the education!!! Not my type of thing but it's got me thinking of finnishes on my guitar stomp boxes. Peace and thanks again.
Oh but I will agree dam this music sucks but I'm an old fart. LOL
jackbart1960 1 year ago
Excellent video Tony. Don't let some stupid comments change your style. You have your own style and it's funny and educational. I really appreciate your efforts in bring us this videos. People like you raise the value of the Internet. Thanks for your excellent job. If other people don't want to see or hear, go ahead and look others videos!! Music is awesome for this vid!!!
manati1978 1 year ago 30
This has been flagged as spam show
Shittest music ever, you sound about 10 and you dedicate your life to spraying paint on bits of junk, Im guessing you come from a poor home and you were probably raised by a 20 year old slag living in a whorehouse due to the fact that you find things like this 'awesome'. Get a proper job, get an education, and please get a better taste in music.
Twiggerz95 1 year ago
@Twiggerz95 i agree about the music, its shit... and tony talks like a fuckin cockhead. but , he is good at what he does, so nice one tony.... what is a propper job anyway???......takin it up the arse like you twigger, for £10 a shot????....
delveslane 1 year ago
whats this song? it sounds perfect for a hardstlye dance
chunjo100 1 year ago
@chunjo100 its dj kazuya but i cant find him anywhere :(
hanzithaking 1 year ago
my printer fucking ate the rice paper...wtf ..i quite
derekmo29 1 year ago
Love the music hardstyle for life.... Nice job
joerock00 1 year ago
My favorite case wish we can see the rest of it painted the HAF 932 rocks.
STRIKER520 1 year ago
@vlcspain4ever2 Une Auto-Air et Rice Paper.
AirbrushTricks 1 year ago
im not even going to begin to describe the level of douche that intro hits... but what i am going to get into is how putting paper between your paint and clearcoat is going to lead to ridiculous problems in the future on a vehicle. dont try this at home kids. unless you are prepared to junk whatever it is you did this to.
godofm3tal1 1 year ago
@godofm3tal1 That's why the pros use rice paper because the clear coat soaks into it and you don't have any problems.
AirbrushTricks 1 year ago
@AirbrushTricks as a 15 year painter, i can tell you that if its not paint, intercoat clear, flake, pearl, or candy, its got no business between your basecoat and clear coat. rice paper or not. now this may fly for test panels or xbox shells, you do that to a car and you WILL be redoing it later. would hate to see your car peeling up because some rice paper got between it. just my experience bro. just because it works in the present, doesnt mean it will work down the road. costly mistake.
godofm3tal1 1 year ago
@godofm3tal1 My sister has a rice paper image on the tank of her cycle that's been there almost 20 yrs and it's still like new, and it sees plenty of exposure to outside sun and weather. We had a Suzuki MC years ago that had vinyl striping from the factory on the tank under the clearcoat and when we sold it at 10 yrs old it was still perfect. Of course the clearcoat has to be good quality unlike the clear t hat automakers use that dries out and flakes off in 5 yrs.
rhblakeman 1 year ago
@rhblakeman thats a motorcycle... A: those things rarely see daylight for most people, and when they do, its for short times before put back in their garages. people also take very good care of their bikes. especially with custom finishes. and its also just one image, which is still a weak link in the otherwise solid chain, but not "guaranteed to fail"... nothing is guaranteed.. but anything that is not a paint product is considered a "contaminant" and "could" affect longevity.
godofm3tal1 1 year ago
@godofm3tal1 Sees daylight regularly living in Phoenix and riding 350 days a year and parking it at work for 8-10 a day.
rhblakeman 1 year ago
@rhblakeman funny, ive heard similar claims about the Maaco $300 specials. unfortunately, they too were over an internet connection incapable of furnishing substantiated proof of their claims. if youre telling me a clearcoat is supposed to last 20 years of baking in the sun every day, id like to know who produces the clear you use. because even PPG doesnt boast that kind of performance...
godofm3tal1 1 year ago
@godofm3tal1 You're perfectly entitled to your opinion no matter how much you sound like you are merely trying to create trouble.
rhblakeman 1 year ago
@rhblakeman dude, if i was trying to create trouble, i could do it in many different places in many different ways besides coming on here and having a ridiculous and unproductive internet debate with people who obviously have no idea what they are talking about. ive been doing this for a long time. i do this to pay my bills and put food on my table. im not saying its a terrible idea for a fun project, or that it wont fly, im just saying dont try this with something expensive.
godofm3tal1 1 year ago
@rhblakeman its advice... take it, leave it, those are your choices... bitching about why im giving it is not an option... ive watched a lot of this guys vids, and this was the only one ive left a really concerned opinion on. lots of his shit is good. and hes a talented artist. but his methods are somewhat unorthodox in a professional automotive field. no doubt from lack of tools/products/experience. like wet sanding using circular motions... but i had to chime in on this.
godofm3tal1 1 year ago
what kind of adhesive are you using
VelezJ20 1 year ago
@VelezJ20 I just used spray adhesive because this is a small project. You don't want to use any outside chemical on a big job cause it coul cause problems.
AirbrushTricks 1 year ago
@AirbrushTricks A shot of clear coat down on the base and set the rice paper into/onto it works good but you have to be careful where you put your fingers to prevent damage to the base paint and dirty prints in the paint, plus you need to use a stippling brush to work it down to get the bubbles out. Let the clear coat you put on as adhesive to get really sticky then you can overcoat with the first wetting coat over the top. No foreign adhesives used that way and no interaction with the paints
rhblakeman 1 year ago
@AirbrushTricks a ok and what recomond for a big project cause im planig on painting my truck and i would like to try it out precciate the advise by the way keep it up
VelezJ20 1 year ago
I've been using waterslide inkjet decal paper for a while now and it's soooooo much easier to hide as it's super super thin and no worries of it lifting if the adhesive fails during highlight brushing. Rice paper is the same paper they make cigarette papers from, it is very fragile and if you arent careful it will jam in your printer. Waterside is on a paper backing that comes off when you soak it in water just like decals that come with model kits.
rhblakeman 1 year ago
@rhblakeman Yeah, waterslide rocks but you have to do it on a light background, that's the only drawback.
AirbrushTricks 1 year ago
@AirbrushTricks You have to consider the background when you do waterslide. With the bills you have you have being a light green background you should be able to get the background to stand out. There are occasions that you have to use an alternate, I've had to do the same with tee shirt transfers before they came out with transfer paper made for dark shirts (has a white layer already to print on). Everything has variables as you know so having 4 or 5 ways of doing things is best, and thin.
rhblakeman 1 year ago
can u give a link of where you got the images for the money
phatmonk6195 1 year ago
@phatmonk6195 I got them off of Istock photo.
AirbrushTricks 1 year ago
Hey Tony! Are you wacked man? Everytime I see you in these videos your pupils are Gigantic!! Huge! And do you think you could have pointed at the camera a couple more times within the last 10 seconds before the credits? lmao.
cavyz22 1 year ago
hey i have a question my airbrush is giving out a kinda wide spray so that if i try to make fine lines it makes a wide dot pls help !!!
hanzithaking 1 year ago
@hanzithaking Ninja trigger control.
AirbrushTricks 1 year ago
@AirbrushTricks and that is ?
hanzithaking 1 year ago
tried this ended up wet sanding to much and messing the picture up
how thick do I have to spray the clear coat- it is a non-gloss if that matters
Gumbie2009 1 year ago
@Gumbie2009 give it 2-3 layers depending on how thick it is
hanzithaking 1 year ago
@hanzithaking i got it now
Gumbie2009 1 year ago
@Gumbie2009 sweet :) what did you make ?
hanzithaking 1 year ago
@hanzithaking native skull with full headdress
Gumbie2009 1 year ago
@Gumbie2009 cool :)
hanzithaking 1 year ago
@hanzithaking yea if you want to see how it turned out its on my facebook Evin Nice other wise I will have a video up when I am done building my sks
Gumbie2009 1 year ago
@Gumbie2009 As thick as possible. Exactly because of what happend to you. That's why automotive clear is almost a must for this.
AirbrushTricks 1 year ago
@Gumbie2009 The wet sand on the first few coats (after it hardens) is just to smooth the spray and dust out so you're only working the outer surface, you aren't trying to take the clear coat layer off at all. Mainly to smooth the coat so the next coat goes over a smooth surface otherwise the next coat makes the defect show even more. Satin or matte you still need to flatten the under coat with wet sanding and the final should be unsanded.
rhblakeman 1 year ago
did you use autoair colors?
chuck9from9matke 1 year ago
what is rice paper? could you use just normal A4 printingpaper???
bboy0610 1 year ago
@bboy0610 rice paper is extremely thin and fragile paper (also it can be eaten, but thats just a little fact)
rcdevil2 1 year ago
@bboy0610 lol , no way... rice paper is like 10 to 100 times thinner as A4printing paper..
weetnietgeen 1 year ago
@bboy0610 if u use that paper ur mom has for cookin or youst that thin paper u kinda can see through use that :)
hanzithaking 1 year ago
@bboy0610
You can but rice paper is much thinner so it doesn't bulge up uner your clearcoat.
AirbrushTricks 1 year ago
Great music. Excellent tricks. Keep ut the good work my friend
cpmxxx 1 year ago
Nice trick.
satajet883 1 year ago
where can i get a page of the $100 dollar bill to print out
superbikeboy01 1 year ago
@superbikeboy01 -.- Google?
XxBBxXxJoKeRxX 1 year ago
No new vids
blackedo23 1 year ago
Fatal!ty headset! lol im wearing that same exact one! nice man
ReDnEcKrCrAcInG 1 year ago
HEY!! please tell me where can i download this music?? and u r pro man... im airbrushing too but i only practicing yet!!
im waiting for your new videos!
lebhardt12 1 year ago
you clear coated that blanket :/
DRPraeuner 1 year ago
hey.. what printer are you using???
jigsaw919 1 year ago
what printer are you using??
jigsaw919 1 year ago
the music is nice, what is it called?
manuscorpion 1 year ago
@manuscorpion
Hardstyle.
westenddd 1 year ago
how come you use rice (or tracing) paper rathr than normal printer paper?
daddyslittlesoldier 1 year ago
@daddyslittlesoldier its thinner and wont make big ridges
Daegle13 1 year ago
@daddyslittlesoldier It's much thinner.
AirbrushTricks 1 year ago
Did you have to trim the paper to fit in the printer ?
717YamahaR1 1 year ago
@717YamahaR1 Depends on the size. You can get 8.5 by 11 at any craft store.
AirbrushTricks 1 year ago
@vlcspain4ever2
Que es lo quieres saver el nombre de las pinturas y papel, o lo que dice de la tecnica?
julianrodolfo 1 year ago
neat...
DomokomoNeyo 1 year ago
i want this on my xbox..:(
bulldogge12 1 year ago
This has been flagged as spam show
WOW that is so COOL.i have seen stuff like that on show cars and did not know how thay did it.that is cool i got to try it.THANK YOU FOR THE TRICK
2intenseee 1 year ago
WOW that is so COOL.i have seen stuff like that on show cars and did not know how thay did it.that is cool i got to try it