we have same board asrock n68c-s UCC..ive got x3 445..but when i change it into UCC ENABLE it restarts for a while and then i cant proceed to windows anymore..but when i change the bios again to disable the UCC..i saw my system information it says that AMD ATHLON II x4 b45..help me with this matter..thnk you..do i need to cnhge my cpu wattage?
@perezed1333 all I'm doing on my pc is enable the UCC function from BIOS, I don't have to modify anything else to make the cpu a dualcore... but remember that not every cpu can use its disabled cores with success!
@XxUFOHUNTER1xX enter BIOS and look for some overclocking functions... but with much care !!! you can damage your hardware if you make big modifications.
I'm getting a really cheap pc having this cpu and I will be stuck with this cpu for some time until I will get a phenom II X2 555 Black Edition to unlock it to a II x4 B55 at 3.5 ghz.
And eventually a gtx 560 Ti most probably.
Thanks for telling me that the single core that it will come with is actually secretly a dual core.
hey, i did this unlock and i played skyrim for the first time and, all the characters heads are really long and they are glitching out! help!! and some other games are fucked up too.
@pancakemix15 your games run well with 1 core enabled, and run corrupted with 2 cores enabled? ...also check for video card driver updates, and another thing... not every cpu can use its manually enabled core with success, that's why they are shut down!
@furulevi the games run with 1 core, but they are relly slow. with 2 cores enabled it suns fine but all people and stuff are glitchy.. do you think it could be something else maybe?
@kacerac09 after enabling ucc check your cpu from the system properties, or task manager, or cpuz, to see if the cpu's name is different, or the number of cores is more, or just see the difference in frames per second in games
@13athanatosgr13 others have unlocked it as I see on the net... maybe your other cores are not usable... don't know for sure... my bios is version 1.40, check yours, but be careful with the bios updates
Hey guys. I tried the same thing on my AsRock N68 VS3 UCC, with an AMD Sempron 145, and it doesn't work properly, and doesn't recognize the Athlon X2 processor when UCC is Enabled. It recognizes the old processor. Any idea on what might be wrong?
@furulevi I read a review in which someone said that he knew Semprons were Athlons with a burnt core, but he later realized that it's just deactivated, due to AMD's sales policy. Is it possible that they're selling Semprons with the deactivated core and the burnt core, and mine's from the second category? It works just fine as a Sempron, but I was really curious about unlocking it into an Athlon X2, since I heard that the cooler can handle it.
@HOLLYWOODude After my theory more than one core exists just to separate a bad area of the cpu from the good area, so if one area is damaged, than the cpu should not be thrown to the trash, but sold with the other working core. If you devide the cpu in more parts (aka cores) than you separate only a smaller area where the physical damage is and you can use more area of the working cpu. So I think you have an Athlon with errors on half of its surface, and because of this it is called a Sempron.
Might be one of those processors. When I quit the BIOS, the computer shut down, and it turns on in a few seconds, and sometimes it loads the operating system, sometimes it doesn't. It's fine after disabling the UCC, no more issues like that. So it might be one of the processors with errors or a malfunctioning core. Thanks for the explanations.
@furulevi hi i have the same motherboard and the same cpu and after doind the same thind as you my pc restart's and at the welcome screen of windows it crashes and then restarts i have windows xp not seven might that be the problem ?? btw 10 for the tutorial XD
@Roko2058 XP is not a problem, my cpu is working on xp32bit, win7 32/64bit too... the cpu's core probably not too good... make sure you did not overclocked it... at least my cpu is not working when overclocked, but others can unlock and overclock it in the same time (youtube user Lancer265)... this is like a lottery I guess
@lapimano2 I have read reviews of sempron processors having this done, in one review the guy over locked too 4.0 Ghz, so from the reviews I've read it's safe :)
@hello1967amazing My Sempron 140 works ok with 2 cores enabled, but it's not stable at all when overclocked even a little bit, and it will refuse to start up if it is overclocked to 3.6 GHz (1GHz in plus from 2.7)! ...so I don't recommend to force it with too high frequencies!
@lapimano2 I haven't tried on anything else than the Sempron 140... so I don't know. About the damage... I don't know either, but my Sempron 140 it is working fine with 2 cores enabled for more than a year!
@furulevi Ok, thanks, i've read many comments, but i havent find anything about damaged cpus so i think it is unlikely or nearly impossible to damage it, but i dont think i will try it, cause i cant affor a new one if im wrong :)
@bakala94 ...I think not, but I'm not sure, this is not overclocking, you are not forcing the cpu to work faster, you're forcing it only to use another core that is probably faulty, or not faulty. If your pc does not work at all after enabling another core, than just take out the mainboard's battery to clear the manual settings introduced into the bios... so this is like a lottery I guess!
@Arbri064 not every cpu can use it's officially turned off core!! you can try to take out the motherboard's battery for a minute and than the bios settings should be reseted to their default values, and the computer should work fine...
@miodragtv With 2 cores enabled, in DiRT3, with max graphics, I can easily keep my finger on the cpu's heatsink (the video card must be pretty decent not to leave all the work to the cpu). I can't give exact temperature measurement, because most temperature monitoring software refuse to recognize the Athlon II 4400e.
@nfsrecorder yes it is the original heatsink and cooler given with the CPU, and the cooler speed is set to almost minimum rpm from the BIOS to be silent. (does not overheat in modern games either)
mine does not unlock 2 core on that cpu:( same motherboard and cpu never done this even when it was new. crashes BOIS then i have to take CMOS Jumper thing out
Is this motherboard decent for overclocking ? I want to unlock the 4th core of an AMD Phenom 8400, and get a decent overclock, since it's @ 2.1 ghz ;s I'l be using the Coolermaster H101 cooler .
@baeecarmen My motherboard (N68C-S UCC) lets me overclock my Sempron 140 from 2.7 GHz to 3.6 GHz, but... even the slightest overclocking after a not too long period results in a bluescreen in Windows, and at 3.6 GHz Windows won't even start at all. So... I think the CPU is the problem in this case not the mainboard.
@furulevi Athlon :) my graphic card sucks so i dont really play games.. gonna upgrade it soon though... But after the change I noticed my PC freezes more often... so now I reverted it back. lol
@furulevi i only changed that setting in BIOS, for OC is it changed from BIOS settings too? BTW what would happen if i have a phenom II X6 on this motherboard and enable UCC?
@BenSow95 Yes, overclocking works from the BIOS too in this case. About the 6 core CPU... I really have no idea, I suppose nothing will happen because there are no more cores on it physically...
**Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS. For Windows® 64-bit OS with 64-bit CPU, there is no such limitation.
@BenSow95 Easy: If you install WIndows in 32 Bit and you have 8GB Ram in your board, then you will only be able to use ~3,25 GB cause of Windows 32Bit Limitation. But if you install 64 Bit Windows you will be able to use up to amaximum of 128GB :D So you will have 8GB in Windows. But you can only install the maximum amount the mainboard AND Proccessor can use! In this case 8GB.
@oscarhm11 My cpu cooler has 4 pins, so I set the rpm to the lowest possible from BIOS. My cpu does not heat up too much with 2 cores enabled (no overclocking) even in high end games too. The Sempron 140 is a 45 nanometer cpu, and it does, not use much power... I have the original fan which was given with the cpu... I don't think you should change your cooler fan if it cools well, but monitor it's temperature with your finger :) especially when playing modern games!
Quick question: i need a duel core CPU for a software i just bought, can i get a single core CPU and unlock the second and have it work properly as if i had an unlocked duel core ?
@wclabs Not exactly.... enabling another core is something like a lottery, there is no guarantee that the single core cpu will work correctly with it's newly enabled core! The cores are turned off for a reason. (smaller/bigger problem)
@THEKINGBG1 The CPU is an "AMD Sempron 140" not "Intel Celeron". It was single core and after unlocking it became dualcore. Dualcore CPUs as I know can't be unlocked into triplecore... but if you have a suitable motherboard you can try, who knows...
@AeRowLc200 I think that motherboard can't unlock another core..., and to make a 3core from a 2core cpu is impossible also as I know, but it should work with a 3core to turn it into a 4core cpu. I haven't tried any other combinations, this is working decently form me even in modern 2011 games too (my video is GF9800GT !).
what button do you press when you restart to enter the bios or whatever the hell that menu is called? I'm getting the amd sempron 140 and a Biostar amd motherboard A880G+. So that should be good for the unlocking, right, cause thats what all the reviews on amazon said to get for this cpu.
@kargmeister1337 I can enter into my BIOS with "F2" or with "DEL" (when the computer starts up, or during restart). That motherboard has also a core unlocking feature (ACC - Advanced Clock Calibration), try it and hope it will work ok for you too !!! (but remember, not every Sempron 140 can be unlocked and used successfully)
I've been searching through Google, and now youtube, for a way to unlock the sempron on my AMD 780g mobo, and I haven't the slightest on how to do so. Should I follow this vid as an example? I am using a gateway
@EngiPie If your BIOS has the UCC function (unlonck cpu core) than just enable it, but I think only ASRock has it, on other motherboards it is made from a combination of a few other settings (more complicated).
@PainlessTragedy23 If your BIOS doesn't have the UCC (Unlock CPU Core) function, than you could try some other settings from BIOS(a bit more comlpicated). I don't know if this trick can be done via a jumper too. I don't recommend to change your BIOS!!! (1 mistake and you're whole PC is useless) ...and even if you have your Sempron140 and a suitable mainboard that is not a guarantee that the cpu will work correctly with it's second core enabled!!! :( this is like a lottery
what is the benfit of unlocking the cpu? I mean in Games the 2 cores will be unlocked anyway Id guess. If I enable the option i can't view the Temp Setting in Core Temp 0.99.8
@OpticalHaze By unlocking the second core your computer uses 2 cores instead of just one. Games by themselves don't use 2 cores on this Sempron 140 if the BIOS and Windows recognizes only 1 core. The frame rates are much better with 2 cores enabled. Not all enabled cores can work correctly! They are disabled by default for a reason...
i having the msi motherboard but the processor is and sempron 140 but i am not getting the oc tweaket tab in bios please suggest what should i do for this??plz helpppppp
@gouravkumar2050 Every motherboard is different... thus every BIOS is different, not all motherboards have the UCC fuction! On other motherboards than ASRock it is more difficult to enable the second core, you have to do more adjustments than one. And even if you have a suitable motherboard the CPU must have another well working core too!!! Not every CPU can be unlocked and used successfully too!!!
@SPOC236 I don't know, I haven't tried it... but the mainboard must have that simple UCC function too, otherwise it must be done in a more complicated way somehow, and the cpu is too old I think in order to enable another core on it (I don't think that one has 2 physical cores)
@CradleofDemet The mainboard says that it supports up to 6 cores... maybe the cpu that you are using can't use its other cores, but what it does after you enable the UCC function from BIOS??
@Lancer265 I didn't modified any frequency settings manually, I used only the automated overclocking thing called "Load Optimized CPU OC Settings" and there applied +5%,+10%, ...+30%. For me it was not working flawlessly for long periods so I don't use my CPU overclocked too, 2 cores enabled is pretty enough.
Hmm just tried this with same motherboard but no overclock and now it starts up but not even the power buttons respond, think I've killed it, any ideas?
Hey man can you help me with ASROCK N68C-GS-UCC I what to know how to use up to 8gb of ram. How much does any slot suport & can I use ddr2 in the same time with the ddr3?
@KEEVVY In order to use 8GB of RAM you need to use 2 modules of 4GB each (DDR2 or DDR3), you can't use DDR2 and DDR3 in the same time !!! Your pc will not start up that way.
For example: can't use 2GB DDR2 + 2GB DDR2 + 2GB DDR3 + 2GB DDR3 in order to get a total of 8 GB.
Other things: you must use a 64 bit (x64) operating system in order to recognize and use all of the 8GB of RAM, ...aaand you must use an AM3 CPU in order to use DDR3 RAMs. (huh... that was long)
@furulevi actually yeah you can but you have to set your ram frequencies in the bios to the slowest chip of ram you have in your computer if your motherboard supports it
How about a sempron le-1150 2.4ghz?
(acording to passmark my cpu beats a P4 3600mhz but still im not sure if its enough for gpus like gt 440)
Mitko54682DS 10 hours ago
My Sempy didn't unlock, I can hit 4.0GHz though! Not a total loss I guess.
savagex805 1 day ago
@savagex805 4GHz ?!? that's great, my cpu works ok at max 3.2 GHz only...
furulevi 1 day ago
Comment removed
savagex805 1 day ago
we have same board asrock n68c-s UCC..ive got x3 445..but when i change it into UCC ENABLE it restarts for a while and then i cant proceed to windows anymore..but when i change the bios again to disable the UCC..i saw my system information it says that AMD ATHLON II x4 b45..help me with this matter..thnk you..do i need to cnhge my cpu wattage?
dotakingist 2 weeks ago
This has been flagged as spam show
does this make the cpu get hotter??
perezed1333 2 weeks ago
@perezed1333 all I'm doing on my pc is enable the UCC function from BIOS, I don't have to modify anything else to make the cpu a dualcore... but remember that not every cpu can use its disabled cores with success!
furulevi 2 weeks ago
can i overclock a AMD athlon 64 processor 3700+ ?
XxUFOHUNTER1xX 3 weeks ago
@XxUFOHUNTER1xX enter BIOS and look for some overclocking functions... but with much care !!! you can damage your hardware if you make big modifications.
furulevi 3 weeks ago
wtf did u press at the start. what button?!
ultimaterobloxian 1 month ago
@ultimaterobloxian to enter BIOS I pressed DEL... if you refer to that one
furulevi 1 month ago
@furulevi ooh i have another version... thanks for replying thou.
ultimaterobloxian 1 month ago
This has been flagged as spam show
@furulevi ooh i have another version... thanks for replying thou.
ultimaterobloxian 1 month ago
This has been flagged as spam show
@furulevi ooh i have another version... thanks for replying thou.
ultimaterobloxian 1 month ago
I'm getting a really cheap pc having this cpu and I will be stuck with this cpu for some time until I will get a phenom II X2 555 Black Edition to unlock it to a II x4 B55 at 3.5 ghz.
And eventually a gtx 560 Ti most probably.
Thanks for telling me that the single core that it will come with is actually secretly a dual core.
FOGoticus 1 month ago
@FOGoticus and it can be overclocked pretty well too, mine is working at 3.2ghz instead of 2.7, but others managed even to 3.6ghz...
furulevi 1 month ago
hey, i did this unlock and i played skyrim for the first time and, all the characters heads are really long and they are glitching out! help!! and some other games are fucked up too.
pancakemix15 1 month ago
@pancakemix15 your games run well with 1 core enabled, and run corrupted with 2 cores enabled? ...also check for video card driver updates, and another thing... not every cpu can use its manually enabled core with success, that's why they are shut down!
furulevi 1 month ago
@furulevi the games run with 1 core, but they are relly slow. with 2 cores enabled it suns fine but all people and stuff are glitchy.. do you think it could be something else maybe?
pancakemix15 1 month ago
hey buddy can i unlock my amd sempron 2.8 ghz into dualcore? my board is asrock n68c-s ucc..
and is there any problem if i mistaken?
theuntouchble1 1 month ago
hey buddy can i unlock my amd sempron 2.8 ghz into dualcore? my board is asrock n68c-s ucc
theuntouchble1 1 month ago
@theuntouchble1 give it a try, enter bios and enable the UCC function...
furulevi 1 month ago
same..
nothing change!
kacerac09 1 month ago
but when i enable ucc nothing change...!
kacerac09 1 month ago
@kacerac09 after enabling ucc check your cpu from the system properties, or task manager, or cpuz, to see if the cpu's name is different, or the number of cores is more, or just see the difference in frames per second in games
furulevi 1 month ago
can i unlock
AMD Athlon ii x2 250 3.01Gzh
intro some x4?
On same motherboard!
Just P1.30 verzion not P1.20 like your's
kacerac09 1 month ago
@kacerac09 it depends on the cpu... , just enable ucc from the bios
furulevi 1 month ago
can i do that on XP my CPU is 1,70 can i have Dual core 1,70?
MrRemaOfficial 1 month ago
@MrRemaOfficial it depends on the mainboard and the cpu, not the operating system, just enable ucc from the bios if your motherboard is the same.
furulevi 1 month ago
hey i have the motherboard asrock n68c-s ucc and i cant unlock my phenom 960t do u know whats the problem? :/
13athanatosgr13 1 month ago
@13athanatosgr13 others have unlocked it as I see on the net... maybe your other cores are not usable... don't know for sure... my bios is version 1.40, check yours, but be careful with the bios updates
furulevi 1 month ago
Hey guys. I tried the same thing on my AsRock N68 VS3 UCC, with an AMD Sempron 145, and it doesn't work properly, and doesn't recognize the Athlon X2 processor when UCC is Enabled. It recognizes the old processor. Any idea on what might be wrong?
HOLLYWOODude 1 month ago
@HOLLYWOODude Enabling and successfully using more cpu cores is like a lottery.... not every cpu can use it's enabled core(s)!
furulevi 1 month ago
@furulevi I read a review in which someone said that he knew Semprons were Athlons with a burnt core, but he later realized that it's just deactivated, due to AMD's sales policy. Is it possible that they're selling Semprons with the deactivated core and the burnt core, and mine's from the second category? It works just fine as a Sempron, but I was really curious about unlocking it into an Athlon X2, since I heard that the cooler can handle it.
HOLLYWOODude 1 month ago
@HOLLYWOODude After my theory more than one core exists just to separate a bad area of the cpu from the good area, so if one area is damaged, than the cpu should not be thrown to the trash, but sold with the other working core. If you devide the cpu in more parts (aka cores) than you separate only a smaller area where the physical damage is and you can use more area of the working cpu. So I think you have an Athlon with errors on half of its surface, and because of this it is called a Sempron.
furulevi 1 month ago
@furulevi Might be the case.
Might be one of those processors. When I quit the BIOS, the computer shut down, and it turns on in a few seconds, and sometimes it loads the operating system, sometimes it doesn't. It's fine after disabling the UCC, no more issues like that. So it might be one of the processors with errors or a malfunctioning core. Thanks for the explanations.
HOLLYWOODude 1 month ago
my is pentium 4 can I make it dual core
??
MrAnickname 2 months ago
@MrAnickname I think Intel CPUs can't be unlocked... or at least not yet...
furulevi 2 months ago
@lapimano2 ** overclocked
hello1967amazing 2 months ago
@hello1967amazing ...and is stable?
furulevi 2 months ago
@furulevi hi i have the same motherboard and the same cpu and after doind the same thind as you my pc restart's and at the welcome screen of windows it crashes and then restarts i have windows xp not seven might that be the problem ?? btw 10 for the tutorial XD
Roko2058 2 months ago
@Roko2058 XP is not a problem, my cpu is working on xp32bit, win7 32/64bit too... the cpu's core probably not too good... make sure you did not overclocked it... at least my cpu is not working when overclocked, but others can unlock and overclock it in the same time (youtube user Lancer265)... this is like a lottery I guess
furulevi 2 months ago
@furulevi 10x for your help i guess its just not working and that is it :|
Roko2058 2 months ago
@furulevi id assume
hello1967amazing 2 months ago
@lapimano2 I have read reviews of sempron processors having this done, in one review the guy over locked too 4.0 Ghz, so from the reviews I've read it's safe :)
hello1967amazing 2 months ago
@hello1967amazing My Sempron 140 works ok with 2 cores enabled, but it's not stable at all when overclocked even a little bit, and it will refuse to start up if it is overclocked to 3.6 GHz (1GHz in plus from 2.7)! ...so I don't recommend to force it with too high frequencies!
furulevi 2 months ago
ok, so if i do it, ill not damage my cpu, right?? i'll try
lippesdc 2 months ago
No itsn't fake i have the same pc specs of this vid and for me workss THANKSSS DUDE <3
giampierofra 2 months ago
@giampierofra :)
furulevi 2 months ago
fake . !!
sempron 140 has 4.6 point for windows 7 . but there min. score 5.8 .. !!
loverboykimi 2 months ago
@loverboykimi My Windows experience index is 5.8.
processor = 6.1 (Athlon II X2 4400e 2.7GHz)
memory = 7.0 (3GB DDR2 800MHz DualChannel)
graphics = 6.8 (GF9800GT 512MB DDR3 256bit)
gaming graphics = 6.8
primary hard disk = 5.8 (IDE ATA 100 160GB 7200rpm)
furulevi 2 months ago
fake difrent processors
kapul4 2 months ago
@kapul4 Google "sempron 140 athlon x2 4400e" and read the 2nd.
furulevi 2 months ago
fake
legaless24 2 months ago
@legaless24 prove it ! :)
furulevi 2 months ago
Hi, is it possible to unlock an amd sempron 145 or it is only avalible with 140.
Is there a chance that the hardware will damage itself and wont run anymore, even with resetting CMOS?
lapimano2 2 months ago
@lapimano2 I haven't tried on anything else than the Sempron 140... so I don't know. About the damage... I don't know either, but my Sempron 140 it is working fine with 2 cores enabled for more than a year!
furulevi 2 months ago
@furulevi Ok, thanks, i've read many comments, but i havent find anything about damaged cpus so i think it is unlikely or nearly impossible to damage it, but i dont think i will try it, cause i cant affor a new one if im wrong :)
lapimano2 2 months ago
@lapimano2 because they are 2 different processors. anyone who is not an idiot would see that...
legaless24 2 months ago
Great stuff I see this video is from 2010 and ur already having Windows7,
where did u get it from?
ProzessorDoktor 2 months ago
can this harm your computer or any part of it ? o.O
bakala94 3 months ago
@bakala94 ...I think not, but I'm not sure, this is not overclocking, you are not forcing the cpu to work faster, you're forcing it only to use another core that is probably faulty, or not faulty. If your pc does not work at all after enabling another core, than just take out the mainboard's battery to clear the manual settings introduced into the bios... so this is like a lottery I guess!
furulevi 3 months ago
I have the same processor ,matherboard
I did everything that the video says
Now my computer doesn't turn on
I think that is broken
Can samebody help me
(sorry for my bad english)
Arbri064 3 months ago
@Arbri064 not every cpu can use it's officially turned off core!! you can try to take out the motherboard's battery for a minute and than the bios settings should be reseted to their default values, and the computer should work fine...
furulevi 3 months ago
Very impressive my friend.
RGUNZ12 3 months ago
@RGUNZ12 thanks ;)
furulevi 3 months ago
How much temperature u get? i have the exact same processor as u
miodragtv 3 months ago
@miodragtv With 2 cores enabled, in DiRT3, with max graphics, I can easily keep my finger on the cpu's heatsink (the video card must be pretty decent not to leave all the work to the cpu). I can't give exact temperature measurement, because most temperature monitoring software refuse to recognize the Athlon II 4400e.
furulevi 3 months ago
How does your windows boot so fast? lol
dudu90tm 3 months ago
@dudu90tm It doesn't boot that fast, THE VIDEO IS CUT to show mostly the essential parts and not to bore others with the useless waiting...
furulevi 3 months ago
@furulevi THANK YOU SO MUCH!!!!
ilijayamato 3 months ago
@ilijayamato ;)
furulevi 3 months ago
Very nice...
euX222X 3 months ago
do you used stock headsink?
nfsrecorder 4 months ago
@nfsrecorder yes it is the original heatsink and cooler given with the CPU, and the cooler speed is set to almost minimum rpm from the BIOS to be silent. (does not overheat in modern games either)
furulevi 4 months ago
@furulevi Will this give me an FPS boost? Yes or no? :D
TazManianDevil20 4 months ago
@TazManianDevil20 definitely YES !
furulevi 4 months ago
wonder if I can do this on a Sempron 145
Danzoizanagi 4 months ago
awesome
lucasm191 4 months ago
mine does not unlock 2 core on that cpu:( same motherboard and cpu never done this even when it was new. crashes BOIS then i have to take CMOS Jumper thing out
MultiHotkey 4 months ago
@MultiHotkey ...not every CPU can use its officially locked core, that's why they are locked, they have some minor or major physical error. :|
furulevi 4 months ago
wtf i have the exact same motherboard and cpu as you, enable UCC save and exit, start windows and it still tells me it's AMD sempron 140 processor :(
DJTwistedz 4 months ago
@DJTwistedz ...probably the CPU's second core is not in a good condition and thus it can't be used, I don't know. :|
furulevi 4 months ago
Is this motherboard decent for overclocking ? I want to unlock the 4th core of an AMD Phenom 8400, and get a decent overclock, since it's @ 2.1 ghz ;s I'l be using the Coolermaster H101 cooler .
baeecarmen 4 months ago
@baeecarmen My motherboard (N68C-S UCC) lets me overclock my Sempron 140 from 2.7 GHz to 3.6 GHz, but... even the slightest overclocking after a not too long period results in a bluescreen in Windows, and at 3.6 GHz Windows won't even start at all. So... I think the CPU is the problem in this case not the mainboard.
furulevi 4 months ago
can i convert N68-VS3 UCC to dual core
psalm2338 4 months ago
@psalm2338 The mainboard can enable other cores! It has the UCC (Unlock CPU Core) function. Try it, see if your CPU is able to use its second core.
furulevi 4 months ago
@furulevi i have 2.80 amd sempron cpu it is single core
psalm2338 4 months ago
does it speed up the cpu
psalm2338 4 months ago
@psalm2338 off course !! The frequency is the same 2.7 GHz, but the performance is much better with 2 cores enabled, especially in games.
furulevi 4 months ago
cant believe my luck, just what im looking for.. have the exact processor and mobo as you x)
BenSow95 5 months ago
@BenSow95 :) than try to enable that UCC function, if the second core is good, than you have a dualcore athlon for the price of a sempron!
furulevi 5 months ago
I have a M61PME-S2P Motherboard and a AMD Sempron Processor ..
Can I unlock it to become Dual-Core?
mckullet004 5 months ago
@mckullet004 don't know, but you can try from the BIOS somewhere here too:
EC firmware selection > hybrid
Advanced clock calibration > all cores
example: youtube.com/watch?v=cAMaIpWGozo&feature=watch_response
furulevi 5 months ago
@furulevi Sir, it doesn't have that EC Firmware selection. T_T
mckullet004 3 months ago
wowo it said Sempron and then it changed to athelon wow you changed processors...
EliteBlackTech 5 months ago
@EliteBlackTech ;)) the processor physically is the same, but since it uses 2 cores it is recognized as Athlon instead of Sempron
furulevi 5 months ago
check out How I was able to unlock my AMD athlon II X2 5000+ to a Phenom FX-5000+ CPU XD !!! its crazy but it works !
LeaveNoEvident256 6 months ago
@LeaveNoEvident256 ;) cool :) keep the camera more steady when shooting, good job !! :)
furulevi 6 months ago
can i do this on my NARRA5 motherboard?
63Alex45 6 months ago
@63Alex45 don't know, but you can try from the BIOS somewhere at:
EC firmware selection > hybrid
Advanced clock calibration > all cores
example: youtube.com/watch?v=cAMaIpWGozo&feature=watch_response
furulevi 6 months ago
@furulevi errr will I lose any data at all to perform this?
BenSow95 5 months ago
@BenSow95 You shouldn't theoretically because your enabling a function from the BIOS only, your not doing anything related to the hard drive.
furulevi 5 months ago
@furulevi thanks, just enabled it... havent noticed any difference...
BenSow95 5 months ago
@BenSow95 Check your CPU, is it Sempron or Athlon this time!? Especially in games you should see the difference. :)
furulevi 5 months ago
@furulevi Athlon :) my graphic card sucks so i dont really play games.. gonna upgrade it soon though... But after the change I noticed my PC freezes more often... so now I reverted it back. lol
BenSow95 5 months ago
@BenSow95 In my case the processor is stable enough with 2 cores enabled, but freezes after a few minutes if it is even a little bit overclocked.
furulevi 5 months ago
@furulevi i only changed that setting in BIOS, for OC is it changed from BIOS settings too? BTW what would happen if i have a phenom II X6 on this motherboard and enable UCC?
BenSow95 5 months ago
@BenSow95 Yes, overclocking works from the BIOS too in this case. About the 6 core CPU... I really have no idea, I suppose nothing will happen because there are no more cores on it physically...
furulevi 5 months ago
@BenSow95 Wouldn´t work ofcourse.
This method only activates a DEACTIVATED processor core, which is physically there but not active by default.
MrGermanBratwurst 5 months ago
@MrGermanBratwurst Why would AMD deactivate a previous one of the cores of a processor and resell as another product? o.o
not that I don't believe you( I already read about it).. Just curious
BenSow95 5 months ago
@BenSow95 Did you watched the vid? Its cheaper to do and if one core of a quad is not perfect they sell it as triple core...
MrGermanBratwurst 5 months ago
@MrGermanBratwurst ohhh... Anyways does this motherboard support 8GB or 4GB mac? I'm kinda confused by it's spec page..
- 2 x DDR2 DIMM slots
- Supports DDR2 1066*/800/667/533 non-ECC, un-buffered memory
- Max. capacity of system memory: 8GB**
*Support with AM3 / AM2+ CPU.
**Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS. For Windows® 64-bit OS with 64-bit CPU, there is no such limitation.
BenSow95 5 months ago
@BenSow95 Easy: If you install WIndows in 32 Bit and you have 8GB Ram in your board, then you will only be able to use ~3,25 GB cause of Windows 32Bit Limitation. But if you install 64 Bit Windows you will be able to use up to amaximum of 128GB :D So you will have 8GB in Windows. But you can only install the maximum amount the mainboard AND Proccessor can use! In this case 8GB.
But be shure to install 8GB of DDR2*800 Memory
MrGermanBratwurst 5 months ago
@MrGermanBratwurst 128GB?? What the..
Why DDR2*800? On my motherboard it says DDR3 16000
BenSow95 5 months ago
@BenSow95 You said:
Supports DDR2 1066*/800/667/533
So your board said somethign different...
MrGermanBratwurst 5 months ago
@MrGermanBratwurst Oh my bad my bad! My Mainboard is the N68-S3 UCC, not the N68-S..
BenSow95 5 months ago
hmmm
SporeFan01234 7 months ago
can i make a single core AMD V160 laptop processor into dual core ? (2.4 gHz)
iMakeFilmsOfGames 7 months ago
@iMakeFilmsOfGames don't know..., but if your BIOS has some core unlocking features than you can try it...
furulevi 7 months ago
when I do this I need to change the ventilation of my processor to avoid burning?
oscarhm11 7 months ago
@oscarhm11 My cpu cooler has 4 pins, so I set the rpm to the lowest possible from BIOS. My cpu does not heat up too much with 2 cores enabled (no overclocking) even in high end games too. The Sempron 140 is a 45 nanometer cpu, and it does, not use much power... I have the original fan which was given with the cpu... I don't think you should change your cooler fan if it cools well, but monitor it's temperature with your finger :) especially when playing modern games!
furulevi 7 months ago
can i unlock using this asRock N68C-SE ?
findlandezul 7 months ago
@findlandezul I think not... no cpu unlocking feature is mentioned on the asrock site for that motherboard...
furulevi 7 months ago
U can do the following with AMD -- Single core into double and triple into quad core
AudioRave 7 months ago
are is this safe?
BojanNusknvp 7 months ago
@BojanNusknvp for me it works perfectly for almost a year...
furulevi 7 months ago
Question: For a software i have, i need a duel core CPU, so can I get a single cored CPU and unlock it to make it work?
wclabs 8 months ago
@wclabs it not 100% that it will work
enza4fingaz2 7 months ago
Quick question: i need a duel core CPU for a software i just bought, can i get a single core CPU and unlock the second and have it work properly as if i had an unlocked duel core ?
wclabs 8 months ago
@wclabs Not exactly.... enabling another core is something like a lottery, there is no guarantee that the single core cpu will work correctly with it's newly enabled core! The cores are turned off for a reason. (smaller/bigger problem)
furulevi 8 months ago
what the fuck was yur CPU celeron(x1) and yu unlocked it to duo even doe its 1 core??
i have 2.80GHZ duo can i unlock it to x3 cores?????
THEKINGBG1 8 months ago
@THEKINGBG1 The CPU is an "AMD Sempron 140" not "Intel Celeron". It was single core and after unlocking it became dualcore. Dualcore CPUs as I know can't be unlocked into triplecore... but if you have a suitable motherboard you can try, who knows...
furulevi 8 months ago
sempron 140 and asrock n68c-s-ucc? it really worked? wow, i will buy it!
flashmate99 8 months ago
i got the AsRock N68PV-GS and i dont see the UCC in BIOS , i got AMD x2 250 3.0ghz and i thought if i could do it X3
AeRowLc200 8 months ago
@AeRowLc200 I think that motherboard can't unlock another core..., and to make a 3core from a 2core cpu is impossible also as I know, but it should work with a 3core to turn it into a 4core cpu. I haven't tried any other combinations, this is working decently form me even in modern 2011 games too (my video is GF9800GT !).
furulevi 8 months ago
@AeRowLc200 does X3 stand triple core, or is it just a smiley?
splendidsquirrel 7 months ago
what button do you press when you restart to enter the bios or whatever the hell that menu is called? I'm getting the amd sempron 140 and a Biostar amd motherboard A880G+. So that should be good for the unlocking, right, cause thats what all the reviews on amazon said to get for this cpu.
kargmeister1337 8 months ago
@kargmeister1337 I can enter into my BIOS with "F2" or with "DEL" (when the computer starts up, or during restart). That motherboard has also a core unlocking feature (ACC - Advanced Clock Calibration), try it and hope it will work ok for you too !!! (but remember, not every Sempron 140 can be unlocked and used successfully)
furulevi 8 months ago
I've been searching through Google, and now youtube, for a way to unlock the sempron on my AMD 780g mobo, and I haven't the slightest on how to do so. Should I follow this vid as an example? I am using a gateway
EngiPie 8 months ago
@EngiPie If your BIOS has the UCC function (unlonck cpu core) than just enable it, but I think only ASRock has it, on other motherboards it is made from a combination of a few other settings (more complicated).
furulevi 8 months ago
@furulevi alright, well thanks anyway. :D
EngiPie 8 months ago
@PainlessTragedy23 If your BIOS doesn't have the UCC (Unlock CPU Core) function, than you could try some other settings from BIOS(a bit more comlpicated). I don't know if this trick can be done via a jumper too. I don't recommend to change your BIOS!!! (1 mistake and you're whole PC is useless) ...and even if you have your Sempron140 and a suitable mainboard that is not a guarantee that the cpu will work correctly with it's second core enabled!!! :( this is like a lottery
furulevi 9 months ago
i having the motherboard ms-7309 it will work??
gouravkumar2050 9 months ago
what is the benfit of unlocking the cpu? I mean in Games the 2 cores will be unlocked anyway Id guess. If I enable the option i can't view the Temp Setting in Core Temp 0.99.8
OpticalHaze 9 months ago
@OpticalHaze By unlocking the second core your computer uses 2 cores instead of just one. Games by themselves don't use 2 cores on this Sempron 140 if the BIOS and Windows recognizes only 1 core. The frame rates are much better with 2 cores enabled. Not all enabled cores can work correctly! They are disabled by default for a reason...
furulevi 9 months ago
THANKS!!! I unlocked my Athlon XP 2400+ into Athlon 64 X2 5200+! :)
Soap442 9 months ago
i having the msi motherboard but the processor is and sempron 140 but i am not getting the oc tweaket tab in bios please suggest what should i do for this??plz helpppppp
gouravkumar2050 9 months ago
@gouravkumar2050 Every motherboard is different... thus every BIOS is different, not all motherboards have the UCC fuction! On other motherboards than ASRock it is more difficult to enable the second core, you have to do more adjustments than one. And even if you have a suitable motherboard the CPU must have another well working core too!!! Not every CPU can be unlocked and used successfully too!!!
furulevi 9 months ago
i have got the same mainboard like you :D
DieSpackos1 9 months ago
@SPOC236 I don't know, I haven't tried it... but the mainboard must have that simple UCC function too, otherwise it must be done in a more complicated way somehow, and the cpu is too old I think in order to enable another core on it (I don't think that one has 2 physical cores)
furulevi 9 months ago
@furulevi i have a Phenom x4 but it wont works when i tried to do that. its still X4 not x6 my mobo sames as yours
CradleofDemet 9 months ago
@CradleofDemet The mainboard says that it supports up to 6 cores... maybe the cpu that you are using can't use its other cores, but what it does after you enable the UCC function from BIOS??
furulevi 9 months ago
How much can i overclock this processor without increasing voltages,i mean only increasing the bus speed?
Lancer265 10 months ago
@Lancer265 I didn't modified any frequency settings manually, I used only the automated overclocking thing called "Load Optimized CPU OC Settings" and there applied +5%,+10%, ...+30%. For me it was not working flawlessly for long periods so I don't use my CPU overclocked too, 2 cores enabled is pretty enough.
furulevi 9 months ago
Hmm just tried this with same motherboard but no overclock and now it starts up but not even the power buttons respond, think I've killed it, any ideas?
konigsred 10 months ago
@konigsred Not all CPUs are in good enough condition to enable its second core, try to take out the mainboard's battery to reset the bios settings.
furulevi 9 months ago
Does this only work on AMD Sempron processors?
HonorConnor 10 months ago
@HonorConnor It works with newer AMD processors, sempron, athlon, phenom
furulevi 9 months ago
@furulevi Could you do a list of steps, I'm confused on how to get there.
HonorConnor 9 months ago
@HonorConnor If you have exactly those components as in the video than it should be like this:
-start pc with default BIOS settings and check if "System Properties" (win+break) says "Sempron processor"
-restart pc and enter BIOS (tap Del at startup)
-go to "OC Tweaker" tab
-find "ASRock UCC" press enter on it and set it to Enabled
-press F10 to save settings and exit BIOS
-start Windows, check your new CPU in system properties (it should say Athlon X2)
Not every cpu runs ok with enabled cores!
furulevi 9 months ago
its safe?
eiwa123 10 months ago
PLSS help me
i eneble the UCC then >> reboot>> but the windows cant open
what shall I do??
DNS11Biwan 10 months ago
This is why AMD wins
XboxHackingTutorials 10 months ago
Hey man can you help me with ASROCK N68C-GS-UCC I what to know how to use up to 8gb of ram. How much does any slot suport & can I use ddr2 in the same time with the ddr3?
KEEVVY 11 months ago
@KEEVVY In order to use 8GB of RAM you need to use 2 modules of 4GB each (DDR2 or DDR3), you can't use DDR2 and DDR3 in the same time !!! Your pc will not start up that way.
For example: can't use 2GB DDR2 + 2GB DDR2 + 2GB DDR3 + 2GB DDR3 in order to get a total of 8 GB.
Other things: you must use a 64 bit (x64) operating system in order to recognize and use all of the 8GB of RAM, ...aaand you must use an AM3 CPU in order to use DDR3 RAMs. (huh... that was long)
furulevi 10 months ago
@furulevi actually yeah you can but you have to set your ram frequencies in the bios to the slowest chip of ram you have in your computer if your motherboard supports it
PsiloCybinDreamX 10 months ago
a direct "CAN INTEL DO THAT" statement.
MidnightRedemption 11 months ago
@MidnightRedemption I think not... (or not yet)
furulevi 10 months ago
good sir what ram type do you have? ddr3?
just curious
gearsofshock 11 months ago
@gearsofshock ddr2, pc6400, 800mhz
furulevi 10 months ago