@Intoxalien I wouldn't recommend installing just Backtrack, but if you really wanted to, you can. My college friend and I always use to run it dual boot with Windows XP, BEFORE Vista or 7 was out. After I made the switch to Linux/Mac, I always installed Backtrack via virtual machine. I use Vmware but Virtualbox works too.
hi @H4x0r18, I hope you can help me out with my problem,,
I have an AspireOne Laptop with an AR5B95 Wireless Network Adapter(I don't use any usb or external adapter!), and I use Backtrack5 on VMware,, when I type in --airmon-ng nothing appears under Interface,Chipset and Driver and when I type --iwconfig it shows eth1 and lo saying -no wireless extension, why is that so?,, wait for your response!
1- How do u choose where your created files will appear while doing this, because mine appear at the root folder ?
2- I ask this because at 4:15 u use .xor file that you already have but i dont understand quite well where u get it, i see that its created at 3:14 automaticly but for me there is no .xor file..
I will keep searching, but thx for the answering !
@FCOTW24 Ok i corrected the second one, it was a bug, like i need to do the 3. step 4. step and again the 3. step, sorry for being noob :P, but i still wanna know the answer for the 1st question ! btw real nice tutorial thank you !
@H4x0r18 Already did, it worked, btw is there a method other that bruteforce or reaver plugin that can take 10hours to crack wpa wpa2 ? (iDONT concider dictionnary attack)
I got my first password, As happy as I am that i learned this I am a little displeased because I get CONNECTION FAILED: unable to obtain ip. WHAT CAN I DO?
@H4x0r18 I can connect on another os. It seems to be as backtrack problem, Im using 5 64 bit . Have you every had this wireless problems with backtrack, I see on the forum some people have. Maybe there is some commands that can help me find out what i need to do. But if not I will have to make a bootable disk and just use backtrack when i want to learn things like this I was hoping to make backtrack my main. Is there a different backtrack that might work better for me?
@SkepsisDub Give the 32 bit version a shot. I haven't tried the 64 bit version just yet. I never seen the connection failed error before. If I was in your shoes, I'd go to the Backtrack forums and ask for some help on your issue. They have excellent support.
ok thanks dude i got one more ? i have seen the alfa brand usb wireless adapter around i have seen it on amazon i may have to get it there but if there are any stores i can just get it at that u know about would you let me know that would probably solve a few problems im going to need it anyways if i plan on doing whats in your vid
@kingkong14957 If you going to by an alfa brand usb, I recommend the model I used in the video. I bought mine off Ebay that included 1000W 15dbi high gain antenna. Its very nice card. Currently, I'm looking for a wireless N card that can do everything for cracking wifi, but so far nothing I've came across. Make sure to verify the chipset too. Sometimes people on Ebay give you a different chipset. I match the chipset with Backtracks site.
@kingkong14957 Go to Ubuntu forum and make a post with your wireless card specs or look up in Google "Ubuntu 11.04 WIRELESSCARD" just replace it with the card your having trouble with, most likely someone all ready made a post.
I really like your vids man. One question though, how did you get wireless working under VirtualBox? I can't for the life of me use aircrack in BT5 under VirtualBox, because the network is bridged as ethernet. There is no option to bridge as wlan in VirtualBox 4.x
@hylogibbon I connected my wireless card via usb and then connected it through virtualbox. Then opened Backtrack and checked to see if my usb was connected to it by going to terminal and typing lsusb which listed all the usb devices connected to Backtrack. If your card is connected, then your ready to go. If not, you'll probably have to enable usbs in Virtualbox. Also make sure your virtualbox is downloaded straight from virtualboxs website or usbs wont work.
@Raiken333 I do not recommend installing Backtrack as your primary operating system because if a user doesn't change the root password and someone happen to know you were running Backtrack on your system, they could guess with the default password "toor" and get full access to your system. I use Backtrack in Vmware and on a bootable Usb Flash Drive.
@StreetTruth1 That looks like either root's .bashrc or .profile has something in it that could be causing this problem, or /etc/bash.bashrc might be the problem. Do you have a bad hard drive that didn't install everything correctly? If this is giving you the error every time you use a command, then you need to try installing Backtrack or Airodump-ng.
@ToonFreak559 Your wireless card has to be in monitor mode before even sending injection packets. Take a look in my description. It gives every detail for what I do from start to finish.
@ToonFreak559 Do you have a good signal with the access point your trying to crack? Also are you sure your wireless card is compatible to inject packets?
hey thanks for the vid, im having one problem when i do the authentication request i dont get a fragment file like u do on my desktop, any idea why that is ?
Hey do you know howto get that 24 hour clock to a 12 hour clock? because i suck at reading it lol and is there a way to get this full screen istead of little cause i have 1366x768
@jakebobjo I'm not quite sure about the clock, never really messed with it. With the screen size, if you are using virtualbox, you'll need to install virtualbox additions in order to get full screen graphics to work.
@H4x0r18 i have tried that but i have to bridge my network then aircrack or w/e this is doesnt work it wont display anything witch is why i went for a full install ):
Hi, I am new to this I booted from backtrack4 final dvd and tried to start the network card but it isnt recognized my network card is (Atheros AR9287 Wireless Network Adapter) is there any way i can install this driver on. One more thing I am booting from CD and backtrack is not installed on my system. Thankx
@H4x0r18 yeah it is im using the same one your using the alfa rtl8187 but for some reason i always have to put in this code from the start: cp /etc/modprobe.d/blacklist /etc/modprobe.d/blacklist.backup
echo "blacklist rtl8187" | tee -a /etc/modprobe.d/blacklist
echo "blacklist r8187" | tee -a /etc/modprobe.d/blacklist
and then once i modpro r8187 and then remove it does airodump-ng work for me. Do you think i need different firmware or something?
@omz69 its cuz i was using a fake version of the alfa i returned that and bought the original one thats from Taiwan and it works perfectly now! Although its hard to use this hack if the router is far away and its not being used to go by a station.
@omz69 Yeah be sure to buy the right card with the right firmware or chipset. When I buy cards, I make sure its matches my needs. Otherwise, I look else where.
@H4x0r18 Another question if you dont mind. Sometimes backtrack 4 crashes and i have to restart it and i find that all my files are missing such as dictionaries and so on. Is there a way to keep those files?
@H4x0r18 Another question if you dont mind. Sometimes backtrack 4 final crashes and after restarting it i find that my files are missing, such as dictionaries n so on. Is there a way to save these files on my windows 7 harddisk?
@omz69 You can use persistence mode for saving files and directories. What I do is install Backtrack on virtualbox and then I can save whatever I want to do. I do all my penetrating testing in virtual machines, never on local host.
Hi ALL... can someone advise me, why after type "airodum-ng (interface)" the #pwr for every SSID shows -ve sign??? even I put my device very near to the network, it still shows -ve sign and also the #data only shows '0' by right it must shows a number 1,2,3,etc...
When I wanted to try this again it wont work. The fragment file dont shows why? Isn't it supposed to come when i do the command aireplay-ng -1 1 -a bssid mon0 ?
@fuskaren Once you got the key, you just copy and paste it into the password dialog that pops up when you connect to a secure router. The key is what authorizes you to connect to it.
I too am not getting any data. Well i am but like 50 in 10minutes! What can this be? Does someone have to be active on the network that is being cracked or can this be done at any time. Im using bt4 r2 and alfa awusu036h
@ziebesten Make sure you have good range within the access point. And are you typing the command correctly? Don't copy what I put, replace the names with your stuff.
@112lolz Backtrack will run, but for cracking wireless you need a compatible wireless card for injections. Not all wireless cards support that. My wireless card is listed in the description of the video.
@H4x0r18 I've read somewhere that it could be a bug in a new kernel version that does not correctly recognise my wireless card. Is there a way to switch back to an older kernel version? (BackTrack 3 won t run for some reason)
@weaver696969 Ever since Backtrack 4 came out, I've always started using mon0 instead of wlan0. The description of this video tells you what I did from start to finish. The mon0 and wlan0 confused me as well when I started using Bactrack 4. I really couldn't say why wlan0 would change or why it is sending heaps of packets.
@weaver696969 That command starts the network interfaces on your computer. It tries to detect everything. If it does everything correctly, you should do a ifconfig and then see if wlan0 or mon0 popped up at the bottom of the list. The wireless one will be either wlan0 or mon0 depending on your wireless device. In Backtrack 4, I've always used mon0, wlan0 was working for me in Backtrack 3.
@weaver696969 No that has nothing to do with it. I'm running Windows 7 right now and still works fine. If its not showing the wlan0 or eth0, you forgot to run slash etc slash init.d slash networking space start in terminal. I made videos to "An Introduction to Backtrack" series. Check my channel for them, it will help you get started.
im a total noob with linux and am fiddling with backtrack 4rc2, im just wondering if i have to install/load any network drivers? im booting from a live usb stick, thx in advance
@sish85 You shouldn't have to. You should get a wireless card that is compatible with Backtrack, otherwise it may not work. You can reference to my "An Intro to Backtrack" series. It will teach you some pretty good stuff and then I would join the Backtrack forum and read a lot of stuff.
@weaver696969 First run the iso or disk in the setup and then install Backtrack to the virtual disk. After that you need to go to the settings for VirtualBox and change the network adapter from Nat to bridged. Make sure to change the interface to eth0 if you are using Ethernet or wlan0 if you are using Wifi. Good Luck!
throws me out of authentication request after it was successful for a wile. repeating not successful data stops at 29. arp on 1 ack rising fast beacons too.
nice video would be nice if u could help :) thnx a lot
it says mon0 is on channel -1, AP is on channel 6. I tried ifconfig mon0 6 and ifconfig wlan0 6, also tried airmon-ng start wlan0 6 but it's not staying on channel 6...
@ChessmsterX To check a network interface, ifconfig mon0 and thats it. As for your issue with aireplay-ng, you didn't do the command right. Its aireplay-ng -5 -b BSSID --channel 6 --ivs -w FILENAME mon0. Its not the network name, the filename can be anything you want.
@H4x0r18 Dude is that the AWUS036HN card you bought not the AWUS036H card, cause the one without the N is better for this stuff, more pre configured and stuff, google it if you have that card i just said on the box.
OHHHHH NOEEEEE It's stopped working, worked 1st 2 times i did it, lol i bet I'm just too far from the ones I'm trying to crack now, that sux, I'ma need to pull out a laptop soon. Try out this tool "Gerix-Wifi-Cracker-NG" it's this same stuff automated, and it comes with Backtrack 4 R2 now =))))))) also same thing but doesn't come with this is GRIMWEPA..... but you really don't need to get the grim if you have the same dealeo on here already =)))) Also, recently, WPA2 has a fault, and soon......
@TheSkullBreakers Thanks for the recommendation! I'll take a look at Gerix. As for WPA2, yes its crackable. I'm sure they are working on a new encryption but of course will be cracked just like the others ;)
hi, i'm having a hard time with my Atheros AR9285, because when I reach 7k of packets it say's you're running out of disk...I'm booting from a 8Gb Corsair flash pen...any sugestions?(sorry for my bad english)send repies to guess_who2nd@yahoo. com
@axl0jimmy Be sure to look up information on Google for Atheros AR9285. Backtrack site has a lot of information on wireless cards. You don't have much space for your presistance mode. You can add more using a tool that I use linuxliveusb creator. Its linuxliveusb website its a great tool.
@OSSTaz This happens mostly from the range between your wireless card and the router. Try another access point. The better signal you have, the better and faster it is to crack.
@H4x0r18 Somehow, i sucessfuly cracked a WEP that was 20% connecticity, which is super far... i think i did it with this guy's video youtube.com/watch?v=mXFG_fAF9hs but i'm not sure cause i was super tired when i did it
hi, after finding the network im trying to hack, when i write airodump-ng --bssid 00:22:3F:78:1A:18 --channel 6 --ivs -w MasterB8 wlan0 . it then tells me channel 6 not recognised, any help would be much appriciated, thanks.
@kimber015 Are you using the correct channel number? Yours may be different, make sure to scan the wireless nearby and find out what channel they are on.
hey ive been trying to get my wifi card to work with backtrack4 on both my laptop and my PC, but alls it says is no wireless networks found. and when i try to start hacking a wep protected connection it says failed no such device/// why is this? i tried to update my drivers in backtrack and it doesnt make a differance. i have atheros AR5B91 card in laptop and a belkin broadcom in my pc. i get over 20 signals in windows and none in backtrack. if you can help that would be great. thanks in advance
@natedogg19391 Did you run the command that I gave in the video for starting your network? Networking in Backtrack is disabled by default for a reason. Once you get it running, it should be working and be detecting networks. If not, you may need to refer to the Backtrack wireless compatible list.
Hi , I'm really not sure of one little thing and i was hoping you can tell me if i could or could'nt inject my wifi adapter "Atheros AR9285 802.11/g/n WiFi Adapter"?
I Would really apriciate the help.....
Want me to sub?
Some of my system info.....
MS Windows 7 Home Premuim 64-bit
Pentium Dual-COre CPU T4300 @.10GHz, 4.0GB RAM, Mobile Intel Series Express Chipset Family
@MasterMindRetsam The AR9xxx chipsets are supported by the ath9k driver. Even though the madwifi compatibility list doesn't specifically state this chipset's compatibility (it only does so for AR928X), I'm quite certain that ath9k won't have much trouble with it. As far as I know, injection is fully supported with this driver, so you should be good to go. :)
@PalmOfTheSmoke Open Terminal and type /etc/init.d/networking start It should do the trick. Also remember you need a compatible wireless card for this to work.
@asifgunz nvm. I got it done , perfect video, btw i have the same adapter, and 2 antennas 5dbi and 9bi, jus got it yesterday n saw ur vid not realizing we have the same stuff.
@NotStoopid0228 The fragment xor file is always a different numbers and letters and such. Its created everytime you follow these commands in the video. You'll notice it popup onto the desktop.
@LinuxHUN Haven't made a video on it but if you need to get past WPA, you'll need to bruteforce the passphase. It can take about 10-15 minutes, depending on how strong the security is. Thats why I didn't make a video on that, it would take too long to record.
@419starter Yeah I know right? Its really nice card. The only disadvantage at this time is there still is no supported wireless N card for backtrack. I found this to be the best card for the price. The netgear usb wireless dongle I had before was good but the range was terrible and it got very hot, I thought it was going to melt the plastic.
Do you know if an Alfa AWUS051NH will work in backtrack? If so, which version of backtrack? Do i need to install a different driver with this Alfa usb adapter? I tried the wlan0 and it didnt work. Im a backtrack noob with a lot of questions obviously. Any help is much appreciated.
@419starter That card is not supported yet but it should be cause they are working on Wireless N cards, otherwise I would have bought that instead of theAWUS036H. Just keep checking the wireless compatibility page on Backtrack. It should get updated some day.
@H4x0r18 i actually got the card to work using BT3 but it seems it does not support injection. i ordered the 36h you have so i should be all set in a day or two. thank you for the reply.
Hello there... My wireless card is [CommView] Atheros AR5B93 wireless network adapter... is this supported in this backtrack 4? I tried backtrack 3 but doesnt work for me.. Please help.. :-)
@thugashes So far I can't seem to find your wireless working with Backtrack but it should. Atheros is very popular for wireless cracking. Just follow this video and if it doesn't work then go to the backtrack forums and start a thread on your subject.
@andrsonnasseer Yeah you just Google search compatible wireless cards for cracking wep and it will come up. Atheros is one of the top supported wireless cards. I wish I had it in my laptop.
@quartesz No problem. I am actually using VirtualBox inside Ubuntu Linux for my videos and other distros I do reviews on. mon0 is just the monitoring part of the wireless card, it helps inject packets and such. wlan0 is the wireless part of the wireless card, it finds the networks. If you don't get any interfaces for wireless or anything, did you use /etc/init.d/networking start command? You need to run that first before doing anything. Its in my previous tutorials.
@stanto123 I don't have a camera. What I am using to record is a screen recorder and its the only thing I could find and use for Linux. Sorry if you thought I wasted your life.
can you tell me were do you got the file .xor to use over the command : packetforge-ng -0 -a BSSID -h 00:11:22:33:44:55 -k 255.255.255.255 -l 255.255.255.255 -y fragment-RANDOMSTUFF.xor -w arpy . I only get a .arp file
@fanfejao The .xor file should be on your desktop when your done using the previous commands earlier in the video. So even before you do the packetforge-ng command, it should be on your desktop. It will be called fragment with a bunch of random numbers and letters .xor Thats pretty much it.
hello first of all very nice video nice explanation. i have a problem after the attack is successful.. i dont get the fragment-098988.xor file.. hence i cant do the packetforge step.. what could i be doing wrong?
@skoi12345678 The fragment file will not be the same as the one in the video. When performing this attack, check your desktop. It should have its own fragment file, just right click, rename, copy the name, and then add it to the command and it should work just fine.
@H4x0r18 once again thank u again for the prompt reply. understood that.... after performing the attack there is no *.xor (fragment file) is there in the desktop.. so could not use aircrack to crack any file... this plus in the very beginning.. the networking needs to be in monitoring mode for mon0 to start or show up.. airodump data was very little as my wep was not connected to any other clients....
@skoi12345678 The .xor file should be created on your desktop when gathering all the packets of information, when you are collecting beacons and data. If you look at your desktop you should see a new .xor file every time you do this method. At least, this as always worked for me but there is many other methods. If this is hard for you to understand, then maybe take a look at the gui version. :)
@H4x0r18 hey thanks for the reply.. but I already managed another way.. i still haven't figured out this way... now trying my hand on wpa2... plus i my bt4 which is persistent usb ... encrypted .. install... somehow is running slow.. any suggestions as how to make it fast?
@skoi12345678 I haven't actually tried installing bt4 on usb before. I would think encrypting it would make it slower cause it has to go through all the encryption data but I could be wrong. I dunno good question.
it would've been nice to get an explanation of what exactly each command does though..
btw, what were your network settings in your virtualbox machine??
like what network adapter did you use??
i always get confused about which network adapter and adapter type i should use..
i can do all this fine in my host OS (ubuntu), but for some reason, it doesn't work when i try it on backtrack in a vmachine.. i think it's got to do with my network settings.
@elnegrobembon Enable Network Adapter box is checked. Attached to NAT. Adapter type is PCnet FAST III. Then just make sure to put the card in monitor mode before starting the entire tutorial, then you'll be good to go.
@TheSushiDude I'll make a video on WPA if I can get it to be under 10 minutes. Otherwise, I couldn't. WPA can be kinda difficult but its not too hard. It just takes a lot longer sometimes than WEP. The only method I know is dictionary attacking or bruteforcing.
sir,
when i am giving this command : airmon-ng
the system is showing no interface.
what to do?
please help.
rohitraheja19 2 weeks ago
@rohitraheja19 Are you using the same wireless card that I used in the video? If not, then it maybe that your wireless card is not supported.
H4x0r18 2 weeks ago
at 2:40 mine doesnt find any data packets it just reads them for ages whats wrong?
hackerperson1 2 weeks ago
What laptop do you use for this?
Intoxalien 3 weeks ago
@Intoxalien Before I used 3 year old Toshiba laptop. I am currently using a Macbook Pro early spring 2011.
H4x0r18 3 weeks ago
@H4x0r18 would you recommend it for installing backtrack only on there, wipe windows off of it and only have backtrack?
Intoxalien 3 weeks ago
@Intoxalien I wouldn't recommend installing just Backtrack, but if you really wanted to, you can. My college friend and I always use to run it dual boot with Windows XP, BEFORE Vista or 7 was out. After I made the switch to Linux/Mac, I always installed Backtrack via virtual machine. I use Vmware but Virtualbox works too.
H4x0r18 3 weeks ago
@Intoxalien same here, i write "y" and then it doesnt find anything, and then repeats from askin to write "y" again .
StepUppp2 2 weeks ago
Thanks man, i didnt notice
alexk77ae 1 month ago
Do you have any written instructions? I just bought the awus036h, and use backtrack R5 im interested in instruction on WPA WPA2 and WEP thanks
alexk77ae 1 month ago
@alexk77ae Check the description of the video. I usually put my notes there.
H4x0r18 1 month ago
hi @H4x0r18, I hope you can help me out with my problem,,
I have an AspireOne Laptop with an AR5B95 Wireless Network Adapter(I don't use any usb or external adapter!), and I use Backtrack5 on VMware,, when I type in --airmon-ng nothing appears under Interface,Chipset and Driver and when I type --iwconfig it shows eth1 and lo saying -no wireless extension, why is that so?,, wait for your response!
diidii0g 1 month ago
@diidii0g Thats because your wireless card is not compatible. Make sure to always check the Backtrack Wiki for compatible wireless cards.
H4x0r18 1 month ago
I have 2 question :
1- How do u choose where your created files will appear while doing this, because mine appear at the root folder ?
2- I ask this because at 4:15 u use .xor file that you already have but i dont understand quite well where u get it, i see that its created at 3:14 automaticly but for me there is no .xor file..
I will keep searching, but thx for the answering !
FCOTW24 1 month ago
@FCOTW24 Ok i corrected the second one, it was a bug, like i need to do the 3. step 4. step and again the 3. step, sorry for being noob :P, but i still wanna know the answer for the 1st question ! btw real nice tutorial thank you !
FCOTW24 1 month ago
@FCOTW24 Change directories before running the commands. See if that does the trick. I'm sure you can always give a path too.
H4x0r18 1 month ago
@H4x0r18 Already did, it worked, btw is there a method other that bruteforce or reaver plugin that can take 10hours to crack wpa wpa2 ? (iDONT concider dictionnary attack)
FCOTW24 1 month ago
@FCOTW24 Maybe Hydra? WPA and WPA2 are the longest to crack, specially if you don't know anything about the wireless access point.
H4x0r18 1 month ago
so if i got that key i only enter that to the password bar on my ipod to connect to internet
mastergunnersgtdev 2 months ago
@mastergunnersgtdev Yes, you enter it as the password or passcode for all devices and systems that will be connecting to that network.
H4x0r18 2 months ago
@H4x0r18 thnx now i need to buy a wifi conector for my pc so i can hack it :(
mastergunnersgtdev 2 months ago
do i need a antenne
mastergunnersgtdev 2 months ago
@mastergunnersgtdev Its strongly recommended to have good range to pick up a lot of networks.
H4x0r18 2 months ago
This has been flagged as spam show
check 0nyx3s.blogspot.com for another simple guide on how to hack into someones network
bmesta 4 months ago
I got my first password, As happy as I am that i learned this I am a little displeased because I get CONNECTION FAILED: unable to obtain ip. WHAT CAN I DO?
SkepsisDub 5 months ago
@SkepsisDub You may have gotten the password, but is the wireless signal good or poor? If you got a weak signal, you may just be out of range.
H4x0r18 5 months ago
@H4x0r18 I can connect on another os. It seems to be as backtrack problem, Im using 5 64 bit . Have you every had this wireless problems with backtrack, I see on the forum some people have. Maybe there is some commands that can help me find out what i need to do. But if not I will have to make a bootable disk and just use backtrack when i want to learn things like this I was hoping to make backtrack my main. Is there a different backtrack that might work better for me?
SkepsisDub 5 months ago
@SkepsisDub Give the 32 bit version a shot. I haven't tried the 64 bit version just yet. I never seen the connection failed error before. If I was in your shoes, I'd go to the Backtrack forums and ask for some help on your issue. They have excellent support.
H4x0r18 5 months ago
This has been flagged as spam show
BETTER THAN BACKTRACK /watch?v=wCxVReiwF2w
epyemelianenko 6 months ago
@epyemelianenko Please do not advertise other youtube videos, thank you.
H4x0r18 2 months ago 2
You know, it works fine with just
1. airodump-ng wlan0
2. airodump-ng --bssid BSSID --channel # --ivs -w FILENAME wlan0
3. aircrack-ng -b BSSID FILENAME-01.ivs
That's what i've always used and never had a problem racking with 20k packets
XOIIOXOIIO 7 months ago
@XOIIOXOIIO Everyone has their own methods. I just wanted to make a video in great detail how this is done with my wireless card.
H4x0r18 7 months ago
ok thanks dude i got one more ? i have seen the alfa brand usb wireless adapter around i have seen it on amazon i may have to get it there but if there are any stores i can just get it at that u know about would you let me know that would probably solve a few problems im going to need it anyways if i plan on doing whats in your vid
kingkong14957 7 months ago
@kingkong14957 If you going to by an alfa brand usb, I recommend the model I used in the video. I bought mine off Ebay that included 1000W 15dbi high gain antenna. Its very nice card. Currently, I'm looking for a wireless N card that can do everything for cracking wifi, but so far nothing I've came across. Make sure to verify the chipset too. Sometimes people on Ebay give you a different chipset. I match the chipset with Backtracks site.
H4x0r18 7 months ago
i am having trouble getting my wireless card to work in ubuntu 11.04 is that something u would be willing to help me with ?
kingkong14957 7 months ago
@kingkong14957 Go to Ubuntu forum and make a post with your wireless card specs or look up in Google "Ubuntu 11.04 WIRELESSCARD" just replace it with the card your having trouble with, most likely someone all ready made a post.
H4x0r18 7 months ago
The pass code is entered into the router without the semi-colons.
hylogibbon 8 months ago
I really like your vids man. One question though, how did you get wireless working under VirtualBox? I can't for the life of me use aircrack in BT5 under VirtualBox, because the network is bridged as ethernet. There is no option to bridge as wlan in VirtualBox 4.x
hylogibbon 8 months ago
@hylogibbon Nevermind, I just figured out that I can't use the same wireless card for the host and guest, I need a seperate network interface.
hylogibbon 8 months ago
@hylogibbon I connected my wireless card via usb and then connected it through virtualbox. Then opened Backtrack and checked to see if my usb was connected to it by going to terminal and typing lsusb which listed all the usb devices connected to Backtrack. If your card is connected, then your ready to go. If not, you'll probably have to enable usbs in Virtualbox. Also make sure your virtualbox is downloaded straight from virtualboxs website or usbs wont work.
H4x0r18 8 months ago
Does BackTrack replace your entire operating system?
Raiken333 9 months ago
@Raiken333 I do not recommend installing Backtrack as your primary operating system because if a user doesn't change the root password and someone happen to know you were running Backtrack on your system, they could guess with the default password "toor" and get full access to your system. I use Backtrack in Vmware and on a bootable Usb Flash Drive.
H4x0r18 9 months ago
This has been flagged as spam show
@H4x0r18 i keep gettin this when i put in the 1st command---- bash: /usr/sbin/airodump-ng: input/output error ??????
StreetTruth1 10 months ago
@H4x0r18 i keep gettin this when i put in the 1st command---- bash: /usr/sbin/airodump-ng: input/output error ??????
StreetTruth1 10 months ago
@StreetTruth1 That looks like either root's .bashrc or .profile has something in it that could be causing this problem, or /etc/bash.bashrc might be the problem. Do you have a bad hard drive that didn't install everything correctly? If this is giving you the error every time you use a command, then you need to try installing Backtrack or Airodump-ng.
H4x0r18 10 months ago
@ToonFreak559 Your wireless card has to be in monitor mode before even sending injection packets. Take a look in my description. It gives every detail for what I do from start to finish.
H4x0r18 10 months ago
@ToonFreak559 Do you have a good signal with the access point your trying to crack? Also are you sure your wireless card is compatible to inject packets?
H4x0r18 10 months ago
Comment removed
kennyl10 10 months ago
@ToonFreak559 Sometimes its your wireless range or you do something incorrectly. Have you double checked everything? Maybe mis typed something?
H4x0r18 10 months ago
hey thanks for the vid, im having one problem when i do the authentication request i dont get a fragment file like u do on my desktop, any idea why that is ?
xLotusKnight 10 months ago
Hey do you know howto get that 24 hour clock to a 12 hour clock? because i suck at reading it lol and is there a way to get this full screen istead of little cause i have 1366x768
jakebobjo 11 months ago
@jakebobjo I'm not quite sure about the clock, never really messed with it. With the screen size, if you are using virtualbox, you'll need to install virtualbox additions in order to get full screen graphics to work.
H4x0r18 11 months ago
@H4x0r18 i installed it to a external but it gave me grub loader so i deleted it lol
jakebobjo 11 months ago
@jakebobjo I install it over virtual machines or flash drives. External drives are a bit more tricky I think.
H4x0r18 11 months ago
@H4x0r18 i have tried that but i have to bridge my network then aircrack or w/e this is doesnt work it wont display anything witch is why i went for a full install ):
jakebobjo 11 months ago
@jakebobjo
right click clock>date & time format>time & dates> then change the time format to the other option
silentgmail 11 months ago
This has been flagged as spam show
@jakebobjo
right click clock>date & time format>time & dates> then change the time format to the other option
silentgmail 11 months ago
@jakebobjo to change your screen resolution go into a command prompt and type
xrandr hit enter it will give you a list of options then type xrandr -s then your desired screen resolution
such as xrandr -s 1280x960
circutwolf 10 months ago
Hi, I am new to this I booted from backtrack4 final dvd and tried to start the network card but it isnt recognized my network card is (Atheros AR9287 Wireless Network Adapter) is there any way i can install this driver on. One more thing I am booting from CD and backtrack is not installed on my system. Thankx
lohith61 11 months ago
i dont get the fragment .xor file for some reason? any ideas? thanks
omz69 11 months ago
@omz69 Is your wireless card compatible for packet injections? Google search Backtrack wireless cards, it should come up with a compatibility list.
H4x0r18 11 months ago
@H4x0r18 yeah it is im using the same one your using the alfa rtl8187 but for some reason i always have to put in this code from the start: cp /etc/modprobe.d/blacklist /etc/modprobe.d/blacklist.backup
echo "blacklist rtl8187" | tee -a /etc/modprobe.d/blacklist
echo "blacklist r8187" | tee -a /etc/modprobe.d/blacklist
and then once i modpro r8187 and then remove it does airodump-ng work for me. Do you think i need different firmware or something?
omz69 11 months ago
@omz69 its cuz i was using a fake version of the alfa i returned that and bought the original one thats from Taiwan and it works perfectly now! Although its hard to use this hack if the router is far away and its not being used to go by a station.
omz69 11 months ago
@omz69 Yeah be sure to buy the right card with the right firmware or chipset. When I buy cards, I make sure its matches my needs. Otherwise, I look else where.
H4x0r18 11 months ago
@H4x0r18 Another question if you dont mind. Sometimes backtrack 4 crashes and i have to restart it and i find that all my files are missing such as dictionaries and so on. Is there a way to keep those files?
omz69 11 months ago
@H4x0r18 Another question if you dont mind. Sometimes backtrack 4 final crashes and after restarting it i find that my files are missing, such as dictionaries n so on. Is there a way to save these files on my windows 7 harddisk?
omz69 11 months ago
@omz69 You can use persistence mode for saving files and directories. What I do is install Backtrack on virtualbox and then I can save whatever I want to do. I do all my penetrating testing in virtual machines, never on local host.
H4x0r18 11 months ago
nice vidoe can u do WPA2 plz
Ctrnew101 11 months ago
This has been flagged as spam show
Hi ALL... can someone advise me, why after type "airodum-ng (interface)" the #pwr for every SSID shows -ve sign??? even I put my device very near to the network, it still shows -ve sign and also the #data only shows '0' by right it must shows a number 1,2,3,etc...
joelabi80 11 months ago
When I wanted to try this again it wont work. The fragment file dont shows why? Isn't it supposed to come when i do the command aireplay-ng -1 1 -a bssid mon0 ?
It worked yesterday ..
fuskaren 11 months ago
So, I got the key, what now? It is in hex, right? Should I just go to any hex -> ascii converter and convert it, or what?
fuskaren 11 months ago
@fuskaren Once you got the key, you just copy and paste it into the password dialog that pops up when you connect to a secure router. The key is what authorizes you to connect to it.
H4x0r18 11 months ago
I too am not getting any data. Well i am but like 50 in 10minutes! What can this be? Does someone have to be active on the network that is being cracked or can this be done at any time. Im using bt4 r2 and alfa awusu036h
ziebesten 1 year ago
@ziebesten Make sure you have good range within the access point. And are you typing the command correctly? Don't copy what I put, replace the names with your stuff.
H4x0r18 1 year ago
my computer cant find a lot of data (30000) for 30 minutes i found only 200!!!! please help!!!
rbg6gdpbx4 1 year ago
Uhm my router does not seem to recieve any packages at all after trying this.
112lolz 1 year ago
@112lolz Maybe your wireless card isn't compatible with injections or you have a newer router that has a threshold limit.
H4x0r18 1 year ago
@H4x0r18 I'm on a laptop, isn't that supposed to be standard compatible?
112lolz 1 year ago
@112lolz Backtrack will run, but for cracking wireless you need a compatible wireless card for injections. Not all wireless cards support that. My wireless card is listed in the description of the video.
H4x0r18 1 year ago
@H4x0r18 I've read somewhere that it could be a bug in a new kernel version that does not correctly recognise my wireless card. Is there a way to switch back to an older kernel version? (BackTrack 3 won t run for some reason)
112lolz 1 year ago
i've followed your steps, but why isn't the data rolling faster, it seems extremely slow.
articaine2 1 year ago
@articaine2 same thing here
galapin26 1 year ago
hallo guys i wont to ask something i found the key in hexdemical but i still dont know how to use this can anyone help me with this thanks !!!
peteriwtv 1 year ago
is it possible to hack my neightbour's router through my own router?
cause he have 10/10 connection and i wanna have a taste of it to :P
gamerdragon89 1 year ago
@weaver696969 Works either way as long as your wireless card is compatible. Go to Google search and look up Backtrack 4 compatible wireless cards.
H4x0r18 1 year ago
@weaver696969 Ever since Backtrack 4 came out, I've always started using mon0 instead of wlan0. The description of this video tells you what I did from start to finish. The mon0 and wlan0 confused me as well when I started using Bactrack 4. I really couldn't say why wlan0 would change or why it is sending heaps of packets.
H4x0r18 1 year ago
@weaver696969 That command starts the network interfaces on your computer. It tries to detect everything. If it does everything correctly, you should do a ifconfig and then see if wlan0 or mon0 popped up at the bottom of the list. The wireless one will be either wlan0 or mon0 depending on your wireless device. In Backtrack 4, I've always used mon0, wlan0 was working for me in Backtrack 3.
H4x0r18 1 year ago
@weaver696969 No that has nothing to do with it. I'm running Windows 7 right now and still works fine. If its not showing the wlan0 or eth0, you forgot to run slash etc slash init.d slash networking space start in terminal. I made videos to "An Introduction to Backtrack" series. Check my channel for them, it will help you get started.
H4x0r18 1 year ago
im a total noob with linux and am fiddling with backtrack 4rc2, im just wondering if i have to install/load any network drivers? im booting from a live usb stick, thx in advance
sish85 1 year ago
@sish85 You shouldn't have to. You should get a wireless card that is compatible with Backtrack, otherwise it may not work. You can reference to my "An Intro to Backtrack" series. It will teach you some pretty good stuff and then I would join the Backtrack forum and read a lot of stuff.
H4x0r18 1 year ago
@weaver696969 First run the iso or disk in the setup and then install Backtrack to the virtual disk. After that you need to go to the settings for VirtualBox and change the network adapter from Nat to bridged. Make sure to change the interface to eth0 if you are using Ethernet or wlan0 if you are using Wifi. Good Luck!
H4x0r18 1 year ago
throws me out of authentication request after it was successful for a wile. repeating not successful data stops at 29. arp on 1 ack rising fast beacons too.
nice video would be nice if u could help :) thnx a lot
BrotKillian 1 year ago
Im a noobie, getting a problem in the middle. I have my card in monitor mode and can see everything with airodump. but when I get to this step:
aireplay-ng -5 -b BSSID --channel X --ivs -w [network name] mon0
it says mon0 is on channel -1, AP is on channel 6. I tried ifconfig mon0 6 and ifconfig wlan0 6, also tried airmon-ng start wlan0 6 but it's not staying on channel 6...
chipset is ralink RT 2870/3070, usb stick
ChessmsterX 1 year ago
@ChessmsterX To check a network interface, ifconfig mon0 and thats it. As for your issue with aireplay-ng, you didn't do the command right. Its aireplay-ng -5 -b BSSID --channel 6 --ivs -w FILENAME mon0. Its not the network name, the filename can be anything you want.
H4x0r18 1 year ago
@H4x0r18 Dude is that the AWUS036HN card you bought not the AWUS036H card, cause the one without the N is better for this stuff, more pre configured and stuff, google it if you have that card i just said on the box.
TheSkullBreakers 1 year ago
OHHHHH NOEEEEE It's stopped working, worked 1st 2 times i did it, lol i bet I'm just too far from the ones I'm trying to crack now, that sux, I'ma need to pull out a laptop soon. Try out this tool "Gerix-Wifi-Cracker-NG" it's this same stuff automated, and it comes with Backtrack 4 R2 now =))))))) also same thing but doesn't come with this is GRIMWEPA..... but you really don't need to get the grim if you have the same dealeo on here already =)))) Also, recently, WPA2 has a fault, and soon......
TheSkullBreakers 1 year ago
@TheSkullBreakers Thanks for the recommendation! I'll take a look at Gerix. As for WPA2, yes its crackable. I'm sure they are working on a new encryption but of course will be cracked just like the others ;)
H4x0r18 1 year ago
hi, i'm having a hard time with my Atheros AR9285, because when I reach 7k of packets it say's you're running out of disk...I'm booting from a 8Gb Corsair flash pen...any sugestions?(sorry for my bad english)send repies to guess_who2nd@yahoo. com
axl0jimmy 1 year ago
@axl0jimmy Be sure to look up information on Google for Atheros AR9285. Backtrack site has a lot of information on wireless cards. You don't have much space for your presistance mode. You can add more using a tool that I use linuxliveusb creator. Its linuxliveusb website its a great tool.
H4x0r18 1 year ago
why do i get very very low data? its like 13000 beacons and 34 data ...why? isthe transmitting router far alot from me?
should i try other signals?
and am not getting that file on desktop
thx for the video btw :D
OSSTaz 1 year ago
@OSSTaz This happens mostly from the range between your wireless card and the router. Try another access point. The better signal you have, the better and faster it is to crack.
H4x0r18 1 year ago
@H4x0r18 Somehow, i sucessfuly cracked a WEP that was 20% connecticity, which is super far... i think i did it with this guy's video youtube.com/watch?v=mXFG_fAF9hs but i'm not sure cause i was super tired when i did it
TheSkullBreakers 1 year ago
why do i get very very low data? its like 13000 beacons and 34 data ...why? isthe transmitting router far alot from me?
should i try other signals?
thx for the video btw :D
OSSTaz 1 year ago
hi, after finding the network im trying to hack, when i write airodump-ng --bssid 00:22:3F:78:1A:18 --channel 6 --ivs -w MasterB8 wlan0 . it then tells me channel 6 not recognised, any help would be much appriciated, thanks.
kimber015 1 year ago
@kimber015 Are you using the correct channel number? Yours may be different, make sure to scan the wireless nearby and find out what channel they are on.
H4x0r18 1 year ago
awesome vid but, how to use this fucking key! :(
5martone 1 year ago
@5martone Once you get the key, you can access the wireless network.
H4x0r18 1 year ago
hey ive been trying to get my wifi card to work with backtrack4 on both my laptop and my PC, but alls it says is no wireless networks found. and when i try to start hacking a wep protected connection it says failed no such device/// why is this? i tried to update my drivers in backtrack and it doesnt make a differance. i have atheros AR5B91 card in laptop and a belkin broadcom in my pc. i get over 20 signals in windows and none in backtrack. if you can help that would be great. thanks in advance
natedogg19391 1 year ago
@natedogg19391 Did you run the command that I gave in the video for starting your network? Networking in Backtrack is disabled by default for a reason. Once you get it running, it should be working and be detecting networks. If not, you may need to refer to the Backtrack wireless compatible list.
H4x0r18 1 year ago
Hi , I'm really not sure of one little thing and i was hoping you can tell me if i could or could'nt inject my wifi adapter "Atheros AR9285 802.11/g/n WiFi Adapter"?
I Would really apriciate the help.....
Want me to sub?
Some of my system info.....
MS Windows 7 Home Premuim 64-bit
Pentium Dual-COre CPU T4300 @.10GHz, 4.0GB RAM, Mobile Intel Series Express Chipset Family
BTW Really nice vid :D
MasterMindRetsam 1 year ago
@MasterMindRetsam The AR9xxx chipsets are supported by the ath9k driver. Even though the madwifi compatibility list doesn't specifically state this chipset's compatibility (it only does so for AR928X), I'm quite certain that ath9k won't have much trouble with it. As far as I know, injection is fully supported with this driver, so you should be good to go. :)
H4x0r18 1 year ago
@H4x0r18 -> Thanks M8.. :D
MasterMindRetsam 1 year ago
@MasterMindRetsam No problem.
H4x0r18 1 year ago
can a laptop go into monitor mode??
ShottaSparX 1 year ago
@ShottaSparX As long as your wireless card is supported and compatible for cracking wireless, yes.
H4x0r18 1 year ago
I dont have any network interface? Why? How do I fix that?
PalmOfTheSmoke 1 year ago
@PalmOfTheSmoke Open Terminal and type /etc/init.d/networking start It should do the trick. Also remember you need a compatible wireless card for this to work.
H4x0r18 1 year ago
This has been flagged as spam show
ok new prob..bt4 cant detect my adaptor..im using atheros ar5b93 on my laptop acer 4745g when i type airmon-ng
shatteringsky91 1 year ago
Comment removed
shatteringsky91 1 year ago
after installing i cant login!!! i typed the username but i cant type the pswrd!!!help me!!!!
shatteringsky91 1 year ago
@shatteringsky91 Username: root Password: toor
Unless you changed it..
H4x0r18 1 year ago
how do i get mon0? , cuz mine be stuck at wlan0
im using the same card
btw. Very detailed tut.
asifgunz 1 year ago
@asifgunz nvm. I got it done , perfect video, btw i have the same adapter, and 2 antennas 5dbi and 9bi, jus got it yesterday n saw ur vid not realizing we have the same stuff.
+ much appreciated.
asifgunz 1 year ago
@asifgunz Not bad man. Glad you liked the video!
H4x0r18 1 year ago
@asifgunz Are you using Backtrack 4 Final? Many people who have asked me the same thing were using Backtrack 3..
H4x0r18 1 year ago
I need some help. I don't have the Fragment XOR file, and I don't know how to get it.
Can someone PLEASE help me?
NotStoopid0228 1 year ago
@NotStoopid0228 The fragment xor file is always a different numbers and letters and such. Its created everytime you follow these commands in the video. You'll notice it popup onto the desktop.
H4x0r18 1 year ago
What about WPA-PSK?
LinuxHUN 1 year ago
@LinuxHUN Haven't made a video on it but if you need to get past WPA, you'll need to bruteforce the passphase. It can take about 10-15 minutes, depending on how strong the security is. Thats why I didn't make a video on that, it would take too long to record.
H4x0r18 1 year ago
hey umm how do u get de konsole ?
Pls answer i needed danks
cCcTurkiyeKarim 1 year ago
@cCcTurkiyeKarim Just open Terminal.
H4x0r18 1 year ago
Comment removed
419starter 1 year ago
@419starter Yeah I know right? Its really nice card. The only disadvantage at this time is there still is no supported wireless N card for backtrack. I found this to be the best card for the price. The netgear usb wireless dongle I had before was good but the range was terrible and it got very hot, I thought it was going to melt the plastic.
H4x0r18 1 year ago
Do you know if an Alfa AWUS051NH will work in backtrack? If so, which version of backtrack? Do i need to install a different driver with this Alfa usb adapter? I tried the wlan0 and it didnt work. Im a backtrack noob with a lot of questions obviously. Any help is much appreciated.
419starter 1 year ago
@419starter That card is not supported yet but it should be cause they are working on Wireless N cards, otherwise I would have bought that instead of theAWUS036H. Just keep checking the wireless compatibility page on Backtrack. It should get updated some day.
H4x0r18 1 year ago
@H4x0r18 i actually got the card to work using BT3 but it seems it does not support injection. i ordered the 36h you have so i should be all set in a day or two. thank you for the reply.
419starter 1 year ago
@419starter No problem! Glad I could help out. If you got anymore questions or need any help with something, send me a message right away.
H4x0r18 1 year ago
Hello there... My wireless card is [CommView] Atheros AR5B93 wireless network adapter... is this supported in this backtrack 4? I tried backtrack 3 but doesnt work for me.. Please help.. :-)
thugashes 1 year ago
@thugashes So far I can't seem to find your wireless working with Backtrack but it should. Atheros is very popular for wireless cracking. Just follow this video and if it doesn't work then go to the backtrack forums and start a thread on your subject.
H4x0r18 1 year ago
yep you know the score squire thats how to do that shizzle
MrMadness87 1 year ago
@MrMadness87 Lol
H4x0r18 1 year ago
People should be ashamed..cracking someone's router, wep key whatever....it's like stealing sweets from Tesco. Bad Bad.;/
MrJacobbbo 1 year ago
Im using my iPod as a wireless adapter?
xxsolidsteelxx 1 year ago
@xxsolidsteelxx I'm pretty sure you can't crack wireless with an ipod, but who knows? I might be wrong :D
H4x0r18 1 year ago
thank you man and ill give you subscrib 4 u
andrsonnasseer 1 year ago
@andrsonnasseer No problem.
H4x0r18 1 year ago
wireless card .?
i dont know but it is work 4 me
im useing netbook acer aspie one with atheros wireless card
andrsonnasseer 1 year ago
@andrsonnasseer Yeah you just Google search compatible wireless cards for cracking wep and it will come up. Atheros is one of the top supported wireless cards. I wish I had it in my laptop.
H4x0r18 1 year ago
i DO
airodump-ng wlan0
aireplay-ng -1 0 -a bssid wlan0
aireplay-ng -3 -b bssid wlan0
the date running very slowwwww
andrsonnasseer 1 year ago
@andrsonnasseer Remember you need to have a compatible wireless card to crack wireless networks. Otherwise, it won't work.
H4x0r18 1 year ago
thx H4x0r18
but i has some question
i suggest that you use virtual box
plz help me how can u use mon0
i type airmon-ng there is no interface about wlan or mon0 occur
my notebook have atheros wireless card
thx for help
and i have a bit in englist sorry if my question cause you do not understand me
quartesz 1 year ago
@quartesz No problem. I am actually using VirtualBox inside Ubuntu Linux for my videos and other distros I do reviews on. mon0 is just the monitoring part of the wireless card, it helps inject packets and such. wlan0 is the wireless part of the wireless card, it finds the networks. If you don't get any interfaces for wireless or anything, did you use /etc/init.d/networking start command? You need to run that first before doing anything. Its in my previous tutorials.
H4x0r18 1 year ago
How can I know the screen will be moving BEFORE watching the video.
I didnt finish it - but i did waste time from my life.
I appreciate your efforts but come on man !! Just hold the damn camera steady ! is it soooo diffiicult ?
PEACE !
stanto123 1 year ago
@stanto123 I don't have a camera. What I am using to record is a screen recorder and its the only thing I could find and use for Linux. Sorry if you thought I wasted your life.
H4x0r18 1 year ago
Stop moving the screen u moron !
stanto123 1 year ago
@stanto123 Don't like my videos? Then don't bother watching them..
H4x0r18 1 year ago
can you tell me were do you got the file .xor to use over the command : packetforge-ng -0 -a BSSID -h 00:11:22:33:44:55 -k 255.255.255.255 -l 255.255.255.255 -y fragment-RANDOMSTUFF.xor -w arpy . I only get a .arp file
thanks in advance
fanfejao 1 year ago
@fanfejao The .xor file should be on your desktop when your done using the previous commands earlier in the video. So even before you do the packetforge-ng command, it should be on your desktop. It will be called fragment with a bunch of random numbers and letters .xor Thats pretty much it.
H4x0r18 1 year ago
@H4x0r18
hello first of all very nice video nice explanation. i have a problem after the attack is successful.. i dont get the fragment-098988.xor file.. hence i cant do the packetforge step.. what could i be doing wrong?
skoi12345678 1 year ago
@skoi12345678 The fragment file will not be the same as the one in the video. When performing this attack, check your desktop. It should have its own fragment file, just right click, rename, copy the name, and then add it to the command and it should work just fine.
H4x0r18 1 year ago
@H4x0r18 once again thank u again for the prompt reply. understood that.... after performing the attack there is no *.xor (fragment file) is there in the desktop.. so could not use aircrack to crack any file... this plus in the very beginning.. the networking needs to be in monitoring mode for mon0 to start or show up.. airodump data was very little as my wep was not connected to any other clients....
skoi12345678 1 year ago
@skoi12345678 The .xor file should be created on your desktop when gathering all the packets of information, when you are collecting beacons and data. If you look at your desktop you should see a new .xor file every time you do this method. At least, this as always worked for me but there is many other methods. If this is hard for you to understand, then maybe take a look at the gui version. :)
H4x0r18 1 year ago
@H4x0r18 hey thanks for the reply.. but I already managed another way.. i still haven't figured out this way... now trying my hand on wpa2... plus i my bt4 which is persistent usb ... encrypted .. install... somehow is running slow.. any suggestions as how to make it fast?
skoi12345678 1 year ago
@skoi12345678 I haven't actually tried installing bt4 on usb before. I would think encrypting it would make it slower cause it has to go through all the encryption data but I could be wrong. I dunno good question.
H4x0r18 1 year ago
cool vid...
it would've been nice to get an explanation of what exactly each command does though..
btw, what were your network settings in your virtualbox machine??
like what network adapter did you use??
i always get confused about which network adapter and adapter type i should use..
i can do all this fine in my host OS (ubuntu), but for some reason, it doesn't work when i try it on backtrack in a vmachine.. i think it's got to do with my network settings.
anyway, thanx man... good tutorial
elnegrobembon 1 year ago
@elnegrobembon Enable Network Adapter box is checked. Attached to NAT. Adapter type is PCnet FAST III. Then just make sure to put the card in monitor mode before starting the entire tutorial, then you'll be good to go.
H4x0r18 1 year ago
ty, hehe... now we just need WPA.
TheSushiDude 1 year ago
@TheSushiDude I'll make a video on WPA if I can get it to be under 10 minutes. Otherwise, I couldn't. WPA can be kinda difficult but its not too hard. It just takes a lot longer sometimes than WEP. The only method I know is dictionary attacking or bruteforcing.
H4x0r18 1 year ago
hey h4x0r18 out of curiosity what did you do in the free time in the video : ) ?