around 34 secs, you took off a piece of metal that was adhered to the broken glass on the top of the ipod. I didn't see you put it back in. In other videos I have watched, I didn't see them put it back either! Is it necessary? I have fixed mine, but dont want to glue it together w/o the metal piece, if I need it...any thoughts?
Hi, I just replaced my iTouch 4G LCD+ digitizer it went great initially. I had the new screen on and working fine, but after I tried to press it back into place all these lines showed up on my screen :( Any help? Thanks!
I'll put a video of the issue up on my channel soon...
@numbersmanpro I repair these iPods on eBay all day. That happens when you try to connect the LCD to the motherboard of the iPod while it is turned on, and the screen is on. It shorts out the LCD causing you to get a white display, or a bunch of crazy vertical lines. Its best to make sure the iPod is completely powered off when replacing the screen.
So glad i found this video :) btw u know when u lift the motherboard up ( 2.33 on the vid) and connect the new digitizer (nt sure if thats the right name) for the new screen does it damage any other components when u lift it up that far?? and also is it necessary to have the copper sheet piece wrapped around it? :)
wait answer this really fast please i order the new screen today , so little black strip just cut it off ?? cause i dont want to do anything with it < so i just want a 100% answer if it should be cut off or not
@Michael11009 The LCD and Digi are sealed together from the factory. These cannot be separated. They have two separate connections that unplug easily. Replace with a new digi and lcd.
@afakethrum I just used my iphone and put it on top of a box looking down on the table. Yes you need to be very careful as those cables are very delicate and are not easy to replace!
@jonnyfury For now, i have just removed the screen to see how it is inside and CAN'T EVEN snap back the screen connector. At least, how do i snap it back? I have a broken glass screen. Should i really attempt replacing it? You make it look easy, but many people say to not even try, or i could risk breaking something. Thanks!! :D
around 34 secs, you took off a piece of metal that was adhered to the broken glass on the top of the ipod. I didn't see you put it back in. In other videos I have watched, I didn't see them put it back either! Is it necessary? I have fixed mine, but dont want to glue it together w/o the metal piece, if I need it...any thoughts?
gutturtle 1 month ago
My ipod 4g ,wont start up ? i can't start up or connect or reset my ipod ? its a black death screen ? .how can i fix it ?
IIISTARofficiall 1 month ago
hey how can i fix my home button?!
TheK20a 1 month ago
Hi, I just replaced my iTouch 4G LCD+ digitizer it went great initially. I had the new screen on and working fine, but after I tried to press it back into place all these lines showed up on my screen :( Any help? Thanks!
I'll put a video of the issue up on my channel soon...
numbersmanpro 1 month ago
This has been flagged as spam show
@numbersmanpro I repair these iPods on eBay all day. That happens when you try to connect the LCD to the motherboard of the iPod while it is turned on, and the screen is on. It shorts out the LCD causing you to get a white display, or a bunch of crazy vertical lines. Its best to make sure the iPod is completely powered off when replacing the screen.
BlackCaScorpio 1 month ago
how much is the ipod screen for?! Also, do i necessarily need to buy the digitizer?! :S
AizaTariq 2 months ago
This has been flagged as spam show
@AizaTariq The screens are $25 on eBay. $22 if you buy them from China.
BlackCaScorpio 1 month ago
This has been flagged as spam show
help me :/
my ipod touch 4g has no backlight an
i replaced the lcd screen
cuteears22 2 months ago
how do you put it back together after the adhesive is gone?
butterrider01 3 months ago
why did you buy lcd and digi separate? they can come as one and you avoid the dust.
jonthecont 3 months ago
So glad i found this video :) btw u know when u lift the motherboard up ( 2.33 on the vid) and connect the new digitizer (nt sure if thats the right name) for the new screen does it damage any other components when u lift it up that far?? and also is it necessary to have the copper sheet piece wrapped around it? :)
alexspacey 4 months ago
fuck, that song make me to break more my iPod screen
sinboy12 4 months ago 4
do you need to use the 3m glue to stick the digitilizer and lcd screens together
rino755125 4 months ago
wait answer this really fast please i order the new screen today , so little black strip just cut it off ?? cause i dont want to do anything with it < so i just want a 100% answer if it should be cut off or not
ProGammer360 4 months ago
where do you bought the parts?
TheAlva2705 4 months ago
where do you got the parts from?
TheAlva2705 4 months ago
how do you disconnect the LCD from the digitizer
Michael11009 4 months ago in playlist Liked
@Michael11009 The LCD and Digi are sealed together from the factory. These cannot be separated. They have two separate connections that unplug easily. Replace with a new digi and lcd.
jonnyfury 4 months ago
which glue needs to be used to place the new lcd + digitizer ?
ilikejumpstyle 4 months ago
@ilikejumpstyle I used a special 3M double sided glue. Search ebay for it.
jonnyfury 4 months ago
@jonnyfury do you need to use adhesive if so what kind of adhesive?
Vaginadactil 3 months ago
Goddamn your quick lol
TheTuktuk42 5 months ago
@TheTuktuk42
lol He fast forward the video dude.
NYVonix115 4 months ago
You are very talented on fixing electronic devices but you need a good cameraman. :)
I screwed power button flex cable, wireless antenna and the LCD screen while trying to disassembly. Be careful guys.
afakethrum 5 months ago
@afakethrum I just used my iphone and put it on top of a box looking down on the table. Yes you need to be very careful as those cables are very delicate and are not easy to replace!
jonnyfury 4 months ago
@jonnyfury For now, i have just removed the screen to see how it is inside and CAN'T EVEN snap back the screen connector. At least, how do i snap it back? I have a broken glass screen. Should i really attempt replacing it? You make it look easy, but many people say to not even try, or i could risk breaking something. Thanks!! :D
zioboby 4 months ago
on the back of that metal plate behind the digitizer that copper wire square thing lol whats that for because mine is snaped in half
plz respond
jacobfare12 5 months ago
@jacobfare12 It's just a sheild. It does nothing, throw it away.
jonnyfury 4 months ago
how much did your screen cost you and did u use the same lcd screen or did u have to get a new one?
trealsoullja 6 months ago
@trealsoullja your digitizer screen?
trealsoullja 6 months ago
@trealsoullja Always use a new one. Search ebay.
jonnyfury 4 months ago
I used the existing glue inside the iPod. Sometimes I will use new glue if needed.
jonnyfury 7 months ago
hi can u tell me if u used any kind of tape to hold it back into place ?
chevy2259 7 months ago