@Rs994ever They are green because they used a specialized vulcanization process when the tires were manufactured so that they could be colored. they have red, yellow, blue, orange... I liked the green the best.
@onionman113 idk how you set yours but i leave my chain under the protechtion of the out side of the cluck and the side of the motor all you have to do is is take off the cluch and flip it
if it were me i'd put the 60 tooth sprocket on the jack shaft and put the sprocket thats on the jack shaft on the axel. then, i'd put the disk brake closer to the frame. this will give you more ground clearence. I dont know if you want to take it anywhere other then your neighbor hood but if u did take to some ORV park then you'd definetly want to do that. When you get the gas pedal in you should test drive it for power. if its not powerful enough i'd go ahead and put a Dirt bike motor on it.
It depends on the type of race, you would probably beat me in speed events, But off road I would beat you. They are built for 2 completely different things, so one of us will always have an advantage over the other, depending on race conditions. Apples to oranges kind of thing.
thats true, i got a 5hp briggs go-kart engine and i want to change it but i dont know what to ge?? any help, i want to have alot of acceleration and be powerful.
@georgequinn12 I would go with a Briggs & Stratton 1150 series engine. It will fit most go kart frames and has 11.5 ft-lbs of torque (thus 1150 series). add a torque converter and voila! a WICKED kart.
im building one alot like this one now, i found that making the pivot point the jackshaft and raising the motor above the drive axle will cut down on the length and weight. lighter/faster. ill post vids when im done if yur interested
I said its fast referring to the acceleration, As the title says this was the first time we had driven it, and I thought that because of the weight it would not respond to the throttle as much as it did, it is difficult to get a good speed reference at that distance and angle.
It is not setup this way anymore, I have a belt drive CVT Clutch in its place, But yes you are correct, the jackshaft in the middle was to reduce speed and increase torque.
Exactly Right, it would make it half as strong and twice as fast...in a perfect world, but it is just too big go gear it that high, I'd burn up the clutch.
yea i saw u got a torque converter in ur other vid. good call. i just ordered a torque a verter but it cost $315 cuz of the whole comet out of business thing.
Ok i race lawn mowers, so maby ime wrong cuse i dont dont do go carts, but wouldnt you whant to have a larger tooth on the engine, like a 5 or 6" and a smaller one on the tranny, that would make it go much faster. But i could be wrong, i use a belt driven not a chain.
i like the design. do you have any tips for building this? im working on one of my own and i like the rear swing arm on yours. just having alittle trouble puttin it all together.
1.Your reading my comment 2. Now your saying/thinking thats a stupid fact. 4. You didnt notice that i skipped 3. 5. Your checking it now. 6. Your smiling. 7. Your still reading my comment. 8. You know all you have read is true. 10. You didnt notice that i skipped 9. 11. Your checking it now. 12. You didnt notice there are only 10 facts Copy and paste to 1 video, tomorrow will be your best day ever! no matter what
I got a bigger GOKART than you I have a 1998 Skydoo snowmowbile engine on my gokart. With the snowmowbile cluches on it. It can get up to 100mph in about 20sec.
I got a bigger GOKART than you I have a 1998 Skydoo snowmowbile on my gokart. With the snowmowbile cluches on it. It can get up to 100mph in about 20sec.
Sweet buggy. hw big did u say that engine was because it has alot of power. I have a few questions. why do u have it running from the clutch to a sproket then from another sproket to the main gear. how come u just didnt do a direct link from the clutch to the shaft? What are the advantages. And What weer those shocks called. thx
i raced alcohol go carts that did 80. looks fine... only a matter of time till its warn out. i blew tons of clutches that were over $400 dollars for racing... ah again, wtf do i know tho?
eh, i had a go-kart back in the day that was mounted like that and worked fine, so i guess i don't know much either. course it was only five horse, so who knows...
ya i started out with a homemad cart with a five horse and the clutch was mounted like that i the bearings just went to shit. if you think about it tho it makes less stress on the inside then the outside but watev.
yea i wondered that too about his sister but still, thats a nice setup you got there, im 17 and into the same shit and built a similar kart, dont listen to peoples shit on here
I got run over by a go-kart once bc the clutch froze up.
InsaneJim (2 weeks ago) Show Hide +1 Marked as spam | Spam have fun trying to keep those berrings in that centrifugal clutch lubed. if it takes off without you when you start it you will know what im talking about. try puting a comet snow mobile Torque converter on in there kind of pricey but you will be glade you did.
have fun trying to keep those berrings in that centrifugal clutch lubed. if it takes off without you when you start it you will know what im talking about. try puting a comet snow mobile Torque converter on in there kind of pricey but you will be glade you did.
if you want more power, and to make it more workable, get a different muffler, and a carb off of a 250cc trike or something, those carbs arent made to drive a go cart
I probably am losing some power due to friction, but it is such a small amount that it is negligible. Power=work/time. I am using the 2 chains to gear it down and increase the amount of work it can do (pull more weight) but it will take longer since the wheels turn slower...increase work, decrease time...power remains constant.
With 22 inch tires i need to put the extra sprockets in there to reduce the ratio, and increase torque, without them it would just burn up the clutch.
lolol who needs brakes tho, my friends civic field car has none XD
netwt42oz 2 months ago
if you want to learn hot to lubricate a clutch or how to install a band brake on a go kart then go to my channel: George2011k
george2011k 7 months ago
SAWEET HIS ASS IS UGLOY AS HELL.
jemmyhadar 9 months ago
the back looks good but the front is pos
poopeater9909 10 months ago
makes vids of your sis washing cars, you know something we can FAP to.
asssface2000 10 months ago
I think you need to paint it.
Flamekano3 1 year ago
This has been flagged as spam show
great video check out mine
ChrisTheHobbyGuy 1 year ago
Sweet go kart looks kinda uncomfortable but sweet lol good job
Lukeschedel 1 year ago
u could of used a Bit of string for the throttle
jadejordan1 1 year ago
if you burned out would it be green smoke? haha
Paintballboy54 1 year ago
@Paintballboy54 The smoke would still be white, You get white smoke from black tires right?
mcl768 1 year ago 2
@mcl768 ive seen green tires with green smoke black tires with black smoke orange with orange smoke etc. so i was just wondering
Paintballboy54 1 year ago
@Paintballboy54 That's true. But yeah my tires would make white smoke. I don't think it could spin them fast enough though lol.
mcl768 1 year ago
Where'd you get the electric start?
Isjix 1 year ago
@Isjix The engine came with it installed.
mcl768 1 year ago
@mcl768 Oh. I've been looking for one can't find one anywhere. need it for my gokart aswell.
Isjix 1 year ago
@mcl768 Lucky.
mage101aoe 1 year ago
In redneck country, Stripped Mini cart with wheels from RV rides you.
Megaultraawesome99 1 year ago
it had a key start y pull
456eee1 1 year ago
Very Cool Kart ....like the gear reduction setup. That Honda 20HP ought to move you along pretty good once you've got the brakes installed.
openwheelmanic 1 year ago
dude try driving with a gas pedal much easier
Jellyhunters 1 year ago
da gone ur sister is purty
timothyhmmnd 1 year ago
is it street legal because ive been driving my go kart in my back yard and messing up the grass not knowing is its street legal
GameInformers247 1 year ago
yes it is
ThePbatemon 1 year ago
have that old jack shaft?
muddymanify 1 year ago
why is the backwheel green?
Rs994ever 1 year ago
@Rs994ever They are green because they used a specialized vulcanization process when the tires were manufactured so that they could be colored. they have red, yellow, blue, orange... I liked the green the best.
mcl768 1 year ago
nice looking sister of yours
Klimpen717 1 year ago
I'm guesing that with that setup you're looking for torque and not speed...
MarvinSanti 1 year ago
@MarvinSanti Correct.
mcl768 1 year ago
the cluch drum is on there wrong ur soposed to see the inside of the cluch
josiahcuster97 1 year ago
@josiahcuster97 no it's on right
onionman113 1 year ago
@onionman113 idk how you set yours but i leave my chain under the protechtion of the out side of the cluck and the side of the motor all you have to do is is take off the cluch and flip it
josiahcuster97 1 year ago
@josiahcuster97 no your wrong it's okay the way it is
onionman113 1 year ago
@onionman113 what the helk are you talkin about im not wrong how am i wrong ask any flat kart racer and they will tell you im rite
josiahcuster97 1 year ago
Cool.. !
aznfilipinoboi 1 year ago
there not gas pedal lol XD thats geto
monkeyeatsyou 1 year ago
Its A Piece Of SHIT!!!
Tommieos1 1 year ago
haha got better Go-KART than you
glosarity 1 year ago
back left tire is warped
burtboy213 1 year ago
@burtboy213 Just a little bit.
mcl768 1 year ago
he "kart" sucks ass! jz buy a real one! mod. karts sucks ass man! your dumbo
timito112 1 year ago
trop nul les mec
sebastien974000 1 year ago
It looks like a smart car with out its bodyy
ashleyburris2 1 year ago
veryyy nice :D
mysticdarkness2 1 year ago
@mysticdarkness2 Thank You.
mcl768 1 year ago
keep the chain drive and add a torque converter. thing will RIP with that gear on it.
gonitronow 1 year ago
@gonitronow That is exactly what I did, Check out my newer videos to see it.
mcl768 1 year ago
were do u get the clutch?????/
joeyisthebest 1 year ago
@joeyisthebest I got it from northerntool. com
mcl768 1 year ago
if it were me i'd put the 60 tooth sprocket on the jack shaft and put the sprocket thats on the jack shaft on the axel. then, i'd put the disk brake closer to the frame. this will give you more ground clearence. I dont know if you want to take it anywhere other then your neighbor hood but if u did take to some ORV park then you'd definetly want to do that. When you get the gas pedal in you should test drive it for power. if its not powerful enough i'd go ahead and put a Dirt bike motor on it.
marffy30 1 year ago
@marffy30 you know thats a great idea
-igozdor01
igozdor01 1 year ago
how did you come up with that jack shaft design? it's bad ass man... love it!
HISandman 2 years ago
i run u over
DillPickle382 2 years ago
thats pretty cool!
jeep734 2 years ago
nice did you made it in your own??... i have also go karts .. if you want to watch ;)
MrsBeasly91 2 years ago
Yes I built it myself, I'll check out your channel.
mcl768 2 years ago
where did you get the clutch from is that the heeter enforcer.Its not a outboard clutch it the one i need.let me know please
grippobros 2 years ago
"whoa its fast i went 2 miles an hour."
blazinzonerguy 2 years ago
did you read the description maybe you will know why and not make stupid comments
chicagobearsnum1 2 years ago
i have a moded 20 hp off road manco scorpion gocart. wanna race? lol
nate11346 2 years ago
i wanna race u i will smoke u, i got a race kart, i beat a atv, check out my videos
triggerhappyxxjohnxx 2 years ago
It depends on the type of race, you would probably beat me in speed events, But off road I would beat you. They are built for 2 completely different things, so one of us will always have an advantage over the other, depending on race conditions. Apples to oranges kind of thing.
mcl768 2 years ago
thats true, i got a 5hp briggs go-kart engine and i want to change it but i dont know what to ge?? any help, i want to have alot of acceleration and be powerful.
georgequinn12 1 year ago
@georgequinn12 It depends on the type of cart and how much room you have.
mcl768 1 year ago
@georgequinn12 I would go with a Briggs & Stratton 1150 series engine. It will fit most go kart frames and has 11.5 ft-lbs of torque (thus 1150 series). add a torque converter and voila! a WICKED kart.
gonitronow 1 year ago
Haha, i'll destroy you if your running 4-stroke
kartkidbirel 2 years ago
chick is hot
fatboysdsm 2 years ago
im building one alot like this one now, i found that making the pivot point the jackshaft and raising the motor above the drive axle will cut down on the length and weight. lighter/faster. ill post vids when im done if yur interested
johnmbranham69 2 years ago
"theres no gas petal yet" lol
thiefmasta24 2 years ago
its a cross cart not a go cart
krokodilsnoppen 2 years ago
I have never heard of a cross cart.
mcl768 2 years ago
woo its fast he says as he drives down the street at 3 mph lol
fastasseddie 2 years ago
I said its fast referring to the acceleration, As the title says this was the first time we had driven it, and I thought that because of the weight it would not respond to the throttle as much as it did, it is difficult to get a good speed reference at that distance and angle.
mcl768 2 years ago
dont break any speed records lol what a couple of lol i cant say it
fastasseddie 2 years ago
Why so many sprockets? To reduce loading the crankshaft?
governator45 2 years ago
It is not setup this way anymore, I have a belt drive CVT Clutch in its place, But yes you are correct, the jackshaft in the middle was to reduce speed and increase torque.
mcl768 2 years ago
on the rear axle how did you bolt it to the frame? what kind of bearings did you use
11redneckforlife 2 years ago
you'd get a lot more torque if you took out that smaller first sprocket
roblox84 2 years ago
no u wouldn't its a 2:1 ratio on the first 2 sprockets and a 6:1 on the second two. taking out the first set would decrease torque and increase speed
sexyskatersam 2 years ago
Exactly Right, it would make it half as strong and twice as fast...in a perfect world, but it is just too big go gear it that high, I'd burn up the clutch.
mcl768 2 years ago
yea i saw u got a torque converter in ur other vid. good call. i just ordered a torque a verter but it cost $315 cuz of the whole comet out of business thing.
sexyskatersam 2 years ago
that's exactly my point. That shit is slow as fuck.
roblox84 2 years ago
sorry i mistyped my comment. I meant get more speed if you remove the sprocket.
roblox84 2 years ago
That sucks
jellyfish6789 2 years ago
i saw a homemade go cart a couple years ago that somebody had to ride on the back to give it gas because it didnt have a pedal
crf100person 2 years ago
Why are the tires green?
tharrington11 2 years ago
because thats the color they were made
jusfuknwidya 2 years ago
it's only rwd....
betatestersrule08 2 years ago
Ok i race lawn mowers, so maby ime wrong cuse i dont dont do go carts, but wouldnt you whant to have a larger tooth on the engine, like a 5 or 6" and a smaller one on the tranny, that would make it go much faster. But i could be wrong, i use a belt driven not a chain.
g5plw62 2 years ago
no, your right
big in the front and small in the back is faster
but you lose acceleration
JoshnumbaOne 2 years ago
i like it
ROBBYKINZ 2 years ago
This has been flagged as spam show
hey you gotta see my racing mower. took me around 6 months to complete and this was it;s 1st test run...
look up " racing mower madness" it's 5:06 long.
made by lolfan44 im the one who is riding on it / built this beast.
you have to see this thing it hauls down this road!!!!!
daphill 2 years ago
i like the design. do you have any tips for building this? im working on one of my own and i like the rear swing arm on yours. just having alittle trouble puttin it all together.
johnmbranham69 2 years ago
This has been flagged as spam show
batranas 2 years ago
ur sis looks pretty good
alexdogg93 2 years ago 17
you high foo ?
kspits 2 years ago 2
Perfect, more junk for your yard
mooey22 2 years ago 11
Garbage
Bloodmyst24 2 years ago
This has been flagged as spam show
type in Ought Six Enduro 2009 in search bar 1st vid
dillio61 2 years ago
hes right your back left tire it looks like the axle is bent
5horsepower 2 years ago
This has been flagged as spam show
I got a bigger GOKART than you I have a 1998 Skydoo snowmowbile engine on my gokart. With the snowmowbile cluches on it. It can get up to 100mph in about 20sec.
BEAT THAT!!!!!
barnyard500 2 years ago
i have a 4X4 off roader named GOKART, with monster truck PK (1500) and ferrari engine goes 100KM (150mph) in 3 sec.
easy hey lieing?
vinnie049049 2 years ago
I got a bigger GOKART than you I have a 1998 Skydoo snowmowbile on my gokart. With the snowmowbile cluches on it. It can get up to 100mph in about 20sec.
BEAT THAT!!!!!
barnyard500 2 years ago
Your back left wheel isn't properly aligned.
GuitarP94 2 years ago
The neighbors must love hearing that going up and down the street!!!
bushna2007 2 years ago
ton essieu est ben croche
Jaiungrospen 2 years ago
thats the same one kylemonkey made
ChuCk230e 2 years ago
swweet
lucasjpot 2 years ago
where did you get the clutch from been looking for one for the same motor for years
johnnyhubum 2 years ago
and thats all i have to say about that.
YOUNGDUM42 2 years ago
you got a hot sister...
YOUNGDUM42 2 years ago
gear it down to have a faaster top speed, it would be perfect...
JoshatSuzuki 2 years ago
jeah, very nice electric start!
Dietertielman 3 years ago
haha...... "sister washing cars"
redline750 3 years ago
lol oh yeh i ride my kart with no brakes 2.... always fun till you hit your dads car <.<
tokewfou 3 years ago
motosurfff!!! lol kwansoo dude!
marlo916 3 years ago
ur sisters cute lol
DAMODUNNE 3 years ago
wheels are buckled
adamski895RS 3 years ago
i think you would have beeen just a lil better off with a belt clutch
bigjoesharkfishin 3 years ago
nice electric start
rptoe 3 years ago
Sweet buggy. hw big did u say that engine was because it has alot of power. I have a few questions. why do u have it running from the clutch to a sproket then from another sproket to the main gear. how come u just didnt do a direct link from the clutch to the shaft? What are the advantages. And What weer those shocks called. thx
Richard.
king14rk 3 years ago
what kind of clutch did you put on there??
bockausten3266 3 years ago
Its a comet 40 series.
mcl768 3 years ago
hey, love that electric start!
Nza420 3 years ago
wow the jack shaft works like it supposed too............
PFCHAUS01 3 years ago
rims are bent if u cant see by the tire wable you should prolly fix that before it loosing the sprocket and causes a fuck up
rabbitfurry3 3 years ago
it's called an optical illusion. the dirt on the tires make it look like the tire is wobbling. you can see the same type of thing on those huge
..nevermind, i just watched it again, and you're right. that's a huge problem.
johnizawsum 3 years ago
your idle on tht engine is very high dude...
cc01571 3 years ago
you got the clutch on backwards. teeth are supposed to be in towards the motor. youll wear the bearings out in the clutch in no time...
onebadgazelle 3 years ago
looks ok to me...
snerby141989 3 years ago
i raced alcohol go carts that did 80. looks fine... only a matter of time till its warn out. i blew tons of clutches that were over $400 dollars for racing... ah again, wtf do i know tho?
onebadgazelle 3 years ago
eh, i had a go-kart back in the day that was mounted like that and worked fine, so i guess i don't know much either. course it was only five horse, so who knows...
snerby141989 3 years ago
ya i started out with a homemad cart with a five horse and the clutch was mounted like that i the bearings just went to shit. if you think about it tho it makes less stress on the inside then the outside but watev.
onebadgazelle 3 years ago
i have the same engine on my go kart im building
uther56 3 years ago
that looks like it goeds 15mph
gopedsport53 3 years ago
sweet
livelongpartyhard 3 years ago
yea i wondered that too about his sister but still, thats a nice setup you got there, im 17 and into the same shit and built a similar kart, dont listen to peoples shit on here
KawiKZ400 3 years ago
looks like a compressor motor to me
jus2loud 3 years ago
This comment has received too many negative votes show
how old r u? to me it looks like ur some poor old redneck that is still getting an allowance by ur mommy
ilikefire90 3 years ago
wooow someone needs a hug...does it make you feel better....now that you have been proven pathetic
dectrone 3 years ago 4
whoa dude, fuck off, i think its pretty neat, nice suspension, btw id like to see you make this in the amount of time and cost that they used
ddmo2 3 years ago
i love how every nieghbor has atleast 1 pickup. rofl i wanna live there
bikeitup14 3 years ago
I got run over by a go-kart once bc the clutch froze up.
InsaneJim (2 weeks ago) Show Hide +1 Marked as spam | Spam have fun trying to keep those berrings in that centrifugal clutch lubed. if it takes off without you when you start it you will know what im talking about. try puting a comet snow mobile Torque converter on in there kind of pricey but you will be glade you did.
stopglobalswarming 3 years ago
Nice projekt mate!!
atvdk 3 years ago
is your sister single?
smokinUjoint 3 years ago 5
have fun trying to keep those berrings in that centrifugal clutch lubed. if it takes off without you when you start it you will know what im talking about. try puting a comet snow mobile Torque converter on in there kind of pricey but you will be glade you did.
InsaneJim 3 years ago
if you want more power, and to make it more workable, get a different muffler, and a carb off of a 250cc trike or something, those carbs arent made to drive a go cart
berettaboy442 3 years ago
if its electric start how come u started it by hand?
motorider85 3 years ago
I didn't have the battery connected.
mcl768 3 years ago
take it off some sweet jumps :P
budwin21 3 years ago
a good position to drive....LoL
DuduBoyy 3 years ago
my go cart has the same engine
ninjahellboy8 3 years ago
This has been flagged as spam show
really really cool!
hey guys, subscribe me and ill subscribe you back
100% guaranteed :D
lolops3 3 years ago
tpt
lilpimpinkkidd06 3 years ago
The chick in the vid is hot. Gimmie her nummer.
Hellcow10 3 years ago 3
you no those motors have a nuertal you can hook up ehh
teamhonda8mike8 3 years ago
I hope those tires are spongy if you're riding rough terrain. No suspension...
zhmapper 3 years ago
there is suspension, and it works well
mcl768 3 years ago
aren't you losing power by running two chains ?
donkeydong75402 3 years ago
I probably am losing some power due to friction, but it is such a small amount that it is negligible. Power=work/time. I am using the 2 chains to gear it down and increase the amount of work it can do (pull more weight) but it will take longer since the wheels turn slower...increase work, decrease time...power remains constant.
mcl768 3 years ago
same principal as a torque converter.
arrwupstt1252 3 years ago
Hey, that aint no honda, thats a honda clone.
Monster060 3 years ago
Same thing...
mcl768 3 years ago
It Is Crap
northstar147 3 years ago
i have a quadbike
Jacksully1996 3 years ago
why didnt you just go from the clutch to the axle? y do u need the extra sprockets?
JJshields77 3 years ago
With 22 inch tires i need to put the extra sprockets in there to reduce the ratio, and increase torque, without them it would just burn up the clutch.
mcl768 3 years ago
my go kart does 60
6377437 3 years ago
nice
Jacksully1996 3 years ago
Have a video? Let's see it in action.
mcl768 3 years ago
This comment has received too many negative votes show
my go kart is a 30 hp and it will smoke that crap!!
unblesstheballs 3 years ago
Cool, Let's see a video of it.
mcl768 3 years ago
yeyeyeyeyeyeye a videooooooo mate... dooo it.
Twiztidninjas 3 years ago
one of the wheels looks loose
mel2jw 3 years ago
good idea probably has a lot more torque now
sheldordaworrior 3 years ago
video is very nice
breezy9585 3 years ago
This is a nice gokart i have one dat i built amlostlike yours but mine a bit longer like a drag racer but its off road.
breezy9585 3 years ago
thats pretty cool buddy.
also your sister looks pretty hot gotta be said
panterashaun 3 years ago 3
Love your idea, but I'd hate to see you get all cut up on those open sprockets.
67mustangreg 3 years ago
your neighbors probably love you for al that noise
imunderpar4win1 3 years ago 4
why is it so slow???
simonmic001 3 years ago
watch?v=kKzAkNxeZoQ , it isnt that slow watch that video
mcl768 3 years ago
oh ok lol
simonmic001