Help, goped tuning problems

[mapukmapuk]

your clutch dead

[CIA360MODS]

I'm not trying to help but I think your prob is the fact you have 2x4s as a deck can you say red neck? And WTF are your shoes?

[bigboyinNY]

I understand u don't have the ped anymore. When I reviewed the vid I saw u back tire is free wheeling so therefore u must adjust the tire.

[enjoiforlife93]

hannah montana

[RCManiacPHCB13]

i think your gas is to lean (thin) try putting more oil in it, if it smokes a lot you have to much oil so just try this and tell me what happens and why is their a wooden box on it? hhahah

[itbeshowinlikeamotha]

Everybody that replies to this now is a dumbass.

[soxonmyfeet]

@itbeshowinlikeamotha then take it off you dumb fuck

[sleadhead1g]

@itbeshowinlikeamotha whats that box on it?????

[cLoke99]

what is the point of the wood crate? if you stack your gonna get caught up on that death trap

[the1theonlyjman]

holy crap we have the same problem guesswhat its the carb prolly cloged jets

[ztheothermikjonesz]

@the1theonlyjman vagina

[toyghgh]

Hey man the carb is failing. Sounds like its starving for fuel. I would rebuild the carb. Its easy. The carb is going to be a walbro or zama or even tieki or tillitson but I think its a walbro. You can get a carb kit for about 15 bucks at your local stihl or Husqvarna dealer. hit me back an let me know what happens

[kylebikesfit]

you can afford the goped but no deck?

[pikeybear]

mine kind of does the same problem but when i put it on full throttle it struggle to reach top rpm help please

[itbeshowinlikeamotha]

What engine?

[pikeybear]

@itbeshowinlikeamotha a g260rc with a walbro 603

[itbeshowinlikeamotha]

Have you tuned it according to DDMs tuning?

[twistedf3ar]

i looked up couchped i cant figure it out lol.but i need help man my ped wont start up i know it needs tuning like i can get it to fire up but it wont idle it just shuts off :(

[itbeshowinlikeamotha]

Try turning the L (low) screw in (right) a 1/4 turn.

[twistedf3ar]

whats the box for? please tell me

[itbeshowinlikeamotha]

Couchped.

[twistedf3ar]

uuuuuuuu whats a couchped????????!!!!!!!!

[itbeshowinlikeamotha]

google it, it is probably the only one of its kind.

[ghostfear3]

Wtf? A BOX?! HAHAHAHAHHA fucking funny as hell it looks so damn stupid

[spacemonkeys0681]

I know thanks, but your shit still sucks

[itbeshowinlikeamotha]

If you even had shit for brains, you would realize what the box was for.

[spacemonkeys0681]

dude that shit looks stupid as fuck

[spacemonkeys0681]

are you a fag?

[itbeshowinlikeamotha]

Great comebacks.

[spacemonkeys0681]

take all the wood off, too much weight

[itbeshowinlikeamotha]

@spacemonkeys0681 strong reading comprehension in this one.

[mayonation]

whats this is gay

[LOOTS243]

One of my friends is having the same problem, if you have fixt it, what did you do???

[superduperlame]

Seems like it needs a new spindle and an air filter.

Funest place to go ride is in a busy mall parking lot .

[jonosk8ter247]

you said that u havent had it for 6 months y? throw it away or something?

[marffy30]

are go-peds friction drive?

[itbeshowinlikeamotha]

Some are direct drive, others have chains.

Technically speaking, every wheeled vehicle is friction driven.

[ozzyvanhalenrox]

mess with high adjustment screws and get and airfilter because it wont run long like that

[driftalotapus]

air flter air filter air filter........and ur an extreme FAG!!!

[itbeshowinlikeamotha]

lmao

[fndsiughi]

stop with the fucking air filter tht doesnt have to anything with it u guys are fucking retarded the back wheel isnt touching the speendle i have the same one faggits

[crownroyal111]

lol wtf is that thing the noah's ark of gopeds?

[itbeshowinlikeamotha]

why yes

[feiscool]

I saw the video of you driving the Goped while it was attached to a couch. Nice

[haydenkx85]

put a air filter on haha

[itbeshowinlikeamotha]

shut up, stop being a stupid fuck

[lebronjamesxxiii]

um put an airfilter on i and i dont know the problem

[itbeshowinlikeamotha]

once again, brainwashed by GPN

[lizdinorawr]

did you check your clutch

[gery315]

lol wattafuck?!?!?!?!

[racedust]

tuned your high jet. it may have a air leak, check your gasket

[mohalkcrazy7]

1 clean the carb 2 right mixture in gas and new gas 3 if not working get a carb

[itbeshowinlikeamotha]

IT HAS BEEN FIXED.

[loadedlover12]

has it been fixed???

[itbeshowinlikeamotha]

it has.

[fairladyz32TT]

put an air filter on it...

[itbeshowinlikeamotha]

It has one on it...it's clear...

[fairladyz32TT]

then the only other solution i can offer you is to tie it to the back of a car drive up and down your street... then see how it runs... let me know

[itbeshowinlikeamotha]

It's not the air filter, i've already got it fixed. Thanks though.

[arnoldstwin36]

after you get your ped running go to the store and buy some zapatos. pull the nails out of your boards too!

[itbeshowinlikeamotha]

haha

That was for my "couch ped".

Thanks for the advice though.

[GOTOWNAGE]

ya people read discription b4 you comment dumb fucks

[0795C5]

what the problem all you say is "Help, goped tuning problems" theres so many things I could think of. 1 connect the rear tyre to the spindel. 2 leave the bike running for about 5mins before reving HIGH!! it damages the bike when u rev high from cold! Good luck with ur ghetto go ped where did you get it st.louis lol

[itbeshowinlikeamotha]

This was not meant to be viewed by anyone other than GPN members.

[MEUANDMYSELF]

adjest the rear tire it isent hitting the wheel

[seanray12]

what? this makes no sense, lol the rear tyre is the wheel, lol

[MEUANDMYSELF]

no the wheel has to be adjust rite so it hits the spindal.

[itbeshowinlikeamotha]

For the love of God, read the description.

[lebron0909]

do the wheel ajustment there a video of how to do it if u type in goped sport

[coolguyedward]

get a new spindle like a size 800

[wakeandskatekid]

maybe you should put an airfilter on there and you need to clean the carb

[itbeshowinlikeamotha]

You people...you've been sooo brainwashed.

[itbeshowinlikeamotha]

Wow, just wow.

[dice142803]

wait...wtf why u have a BOX on there any way?

[itbeshowinlikeamotha]

I had it mated to a couch, I used to have a video of it, I think i'll have to go get it off of photobucket.

[nippleshitterr]

That is a wooden box on wheels with an engine.

Piece of crap!!!

[itbeshowinlikeamotha]

Okay.

[nippleshitterr]

YOUR MOM LIKES INMATURITY

[nippleshitterr]

your mom doesnt run right

[itbeshowinlikeamotha]

Wow, I like immaturity.

[gurudude2themax]

id say new carb....but try new gaskets first

[itbeshowinlikeamotha]

"It was a gasket, got it fixed running like a champ!"

That was quoted from me about 5 months ago.

[tuffman2]

you need a new carberator or new gaskets because it has gunk in it or is old I had that problem

[itbeshowinlikeamotha]

"It was a gasket, got it fixed running like a champ!"

that was quoted from me about 5 months ago.

[inouseeitya]

ive had this problem to... Your back tire is too worn out and so when it weres out it gets smaller and eventually when it gets to small it doesnt touch the spindle. Long story short you need a new back tire or swop the front and back.

[itbeshowinlikeamotha]

You can adjust the rear tire...

It was a tuning problem, I lifted the engine off the tire so I didn't have to lift it off the ground.

[lobreiter1025]

I know whats wrong with your Go-Ped, it sucks, go by a car

[itbeshowinlikeamotha]

I know why you're a failure at life, your mother dropped you on the head as a child.

[dummmmy0]

the same thing happends to me im getting new gaskets right now {:

[GuitoRWC]

glad to hear u got it runnin dude

[itbeshowinlikeamotha]

Thanks, it runs like a beast, check my other vids.

[nitro231]

do u have a clutch kit to allow the scooter to idle

[itbeshowinlikeamotha]

No, i the wheel disingaged. But i do own one of those ada clutch kits.

[itbeshowinlikeamotha]

It was a gasket, got it fixed running like a champ!

[gopedman44]

its the high jet i am guessing... ask some1 on gpn!!!!!!?

[itbeshowinlikeamotha]

Im banned, lol. Im couchpertater

[turdler]

i heard about that, what did you get banned for? btw it's the high jet, and what's goin on with that deck? put on an airfilter....

[itbeshowinlikeamotha]

Well, heres an update.

Got a UFO filter, and rode it up and down the block. Fun as hell, gps'd @ 28 .675 spindle. And i didn't have on a deck or shoes. Somebody mixed 40:1 Gas and put it in my tank that is SUPPOSED be 25:1 needless to say, i now a have a 0mph ped. I got banned for saying "jews are cool as long as they dont talk to me"

[turdler]

haha, that sucks, lemme guess, tony stewart banned you? can't believe your engine seized over 40:1 gas, i've heard of them not running properly, but seizing? bummer dude do you plan on rebuilding it?

[itbeshowinlikeamotha]

Do you got aim dude? And yeah, i plan on rebuilding it, but not now. It was a g260, there supposed to have 25:1 and 40:1 is way to low and i WOTED it like a mofo.

[turdler]

bummer and yeah i do i think i already added you

[itbeshowinlikeamotha]

What is it?

[turdler]

pm sent

[JLamb14]

are you sure i didnt just foul you plug

[itbeshowinlikeamotha]

Yes.

[colintheshit]

dirty fuel ,dirt in the jets? and like guito said lol?

[itbeshowinlikeamotha]

No, the tuning, it has nothing to do with the spindle touching.

[colintheshit]

clean the carby out,clean every tiny hole with a nylon guitar string and your fueltank and change or add a in line filter.Then start tuning your hi - low screws ,in or clockwise will lean the mix of fuel to air .

[itbeshowinlikeamotha]

Thanks, but i need help from someone that knows what there talking about. There is a tuning problem and i cant seem to get it. The carb is clean and theres a brand new filter.

[colintheshit]

turn the screws to tune the carby so the engine will run better,check all nuts and bolts on the engine case ,exhuast,inlet manifold and check your fuel line for cracks also gaskets and diaphrams .

[GuitoRWC]

is the spindle making contact with the tire?

[itbeshowinlikeamotha]

I did that so i didnt have to hold it off the ground.