Case never went full in. You lose so much leverage when you do that. and the deere is a parallel lift vs. a radial left. And there is a frickin John Deere logo on the thing they were lifting. Bogus, rigged.
JOHN DEERE SUCKS!!!!!!!!!!!! IF I WAS THE BOBCAT OPERATOR I WOULD HAVE PICK THE JOHN DEERE UP AND TURNED IT OVER!!!!!!!! BET THE OTHER MACHINES WASNT RUNNING AT FULL SPEED,,,WHAT A CROC!!!!!!!!!!!!! JOHN DEERE SUCKS!!!!!!!!!!
@MotoScootMech actually JCB and Volvo worked together to create the best skid steer on the market and they did! So Volvo and JCB have the best skid steer today!
Case would've done it if he put the load on the carriage instead of out on the forks another 10"... If you notice the deer shoved all the way into the block no gap between block and carriage...
lol cat probs had the best chance of lifting none of this generic new holland and most of all john deere, 3t is about the wieght of those bobcats...jd trying to make em look good....
Shame on Deere is right. I have the 2001 95xt and Ii have picked crazy loads...and he would have been able to scoot up on that thing and run away with it...that last 6 inches makes a ton of difference.
The Way theses thing tip is all on weight distribution so if you have a machine with the center of gravity in a different spot then it going to tip, so, this challenge, to me cant be caompared
Bobcat S-850 R.O.C. is 3,950lbs and the T-870 is 3,525 lbs. but the t870s operating tip is 5000 lbs and full tip load is over 10,000 lbs. jd cant even complete lagitamitly because theyre published specs are fattened, ive seen the Bobcat Company specs breakdowns of the 2, the actual breakdowns, not the published ones that jd puts out. the bobcat was beating the jd in every catergory except pushing cap. but why push stuff when you can just pick it up haha.
this video is bullshit, if that weight is 6,000lbs, and they have the biggest production model made from each company then this shouldn't even be a problem for every single machine to at least get it off the ground, i have a cat 247b and i had a semi load of limestone delivered from canada and each rock weighed at least a us ton. and i lifted around 40 rocks off the truck, 5 feet off the ground and down to the ground with out tipping once, it has a 3,000lb max and i've pushed that to the limit!
this is very sad that John Deer will agree to that mascarade it was clear that the New-Holland and the Case could lift that weight if there fork was all in............
this is some gay shit, the john deere is the only one to slide the fork all the way under the weight, if the case would have done that it would have lifted it with no problem
if positioned right, a Bobcat T-300 will lift 6,000lbs. the other day i stacked rebar bundles (2000lb each) and lifted them, not high but all the way off the ground. Bobcat had a teat done of the T-870 vs the biggest JD, i think the 333d. the bobcat t-870 kicked the crap out of the deere in everything except pushing capacity. But in my opinion, the bobcat will still outpush the deere. i am biassed towards Bobcat since i work for a dealer but even so deere sucks. JD's specs are not true.
fucking bullshit!!!!!! The Case would have done it if...1- there wasn't a 4 year old operating it! come on...put the load ALL the way onto the forks!!! 2- this whole 'competition' wasn't fixed! John deere are for city landscapers who don't need a real skid steer. Bobcats are for people too dumb to know what an actual skid steer is!
How about we bring out a Cat D7 vs. the John Deere. Not even comparing spec to spec machines. Also operators are not placing forks all the way in. This is a set up. John Deere should ask that this be removed.
It is LAME that deere cheats in contest to make themselves look best. If you cheat you don't really win at all. Some people are probably stupid enough to not notice the Case operator didn't position the load fully under the load. The Franklin's first attempt wasn't fully under the load either. Looked like it may have been on the second attempt.
CASE lifted it even without the forks in all the way. So if they were all the way through CASE would of won. DEERE lifted with the forks all the way through from the start. Know for a fact if DEERE forks werent inserted all the way, it couldnt lift anything at all unlike how that CASE did it without being fully inserted, and still lifted.
I believe that John Deere had leader than all. because I used them often times since there is excellent designed. Long time I worked there. Cat and other kinds are not easy.. I only prefer to use John Deere is more comfortable for me to work there. Depend you had good skill.
John Deere, just how stupid do you think the American people are? That is so obviously rigged, although John Deere has a fine skid steer, I've had my 4475 for 15 years with zero break downs, I would have thought John Deere would have more class than this.
thats fuckin bullshit!!! the case and new holland didnt even put the forks in all the way! real cheep JD... the case had that thing no problem if it pulled up all the way
a takie TL150 would do that no problem. We all know this is a deere show though cause u see there equipment lined up to the left. Look up this vid " Takeuchi TL150 Skid Steer Benching 7000LBS! "
The new bobcat t870 has about 3400lb ROC and the s850 has almost 4000lb Roc. For bobcat their roc is usually about half of tip. I use a t-300 to move things including other skid steers, especially the new holland trades we get. This is typical crap from a company who sells more tee shirts than equipment.
thats ok the new bobcat t870 and s850 will show john deere and everbody else what a real power lifting beast skid steer is and it can lift that thing 12 feet in the air. deere cant do that ever
the bobcat t-250 is a brutus machine and is a pusher, and heavy mover, an unstoppable beast. there is a reason why most people commonly refer a skid steer loader or CTL as a bobcat. the other brands dont really compare when you actually use them on a jobsite.......
This is setup by john deere but there is a few flaws. i work for a bobcat brand skid steer dealer and i did this test myself. here are the results- the tip load on a 320 and 300 are the same and the 300 wont lift it either. bobcat t-250 WILL lift 6000 lbs and not tip, the reason, its a radius path . i use a t-250 for a rebar loader at work and unload the rebar del. truck 2 bundles at a time(2,000 lbs each). if they got a t-250 they could've carried that thing back out to the truck it came in on
I'm just as much of a redneck as the next guy, but what crowd would have tht much enthusiasm for lifting a concrete block? haha could those possibly be JD employees getting a bonus?
its like makin a show sayin im the best and im gonna put my picture everywhere and im gonna win so u guys act like u cant do it...srry smackdown? yeah just as real as the wrestling smackdown
@hondakseries yea this whole smakcdown thing is set-up. There is no way that john deer is better in all things. I mean I like john deere we use them at my landscaping buisness but we have a cat skidsteer and case that work just as well as ours deeres
First of all look at the side of the track on the bobcat it says ROLLER SUSPENSION which takes about 400lbs off the roc of the t320. And why does that iddiot in the t320 keep moving the machine side to side. These guys are not operators. The case guy should of lifted it but his forks werent in all the way. This is rigged
funny how that block is the same weight as the bobcats rated operating capacity but it couldn't lift it???? I'm thinking they fucked with the pressure by-pass valves on some of these machines. I'm sure the new Holland could have done it too, these videos have really turned me off to deer and i liked some of there bigger stuff too. these are shady sales tactics
It's funny how Deere set this up including opperators that are paid by them and only God knows what they did to their machine to performe better than the ones we buy and still so far every bodys oppinion here is tha the Case outperformed the Deere ,I guess if it was a public fair where every body would bring their machine, Deere will try to buy back every single machine that they have sold so that non Deere machine will participate, my guess is that this show has back fired on Deere WAY TO GO.
first of all this is total bullshit the case could have easily did it if he curled the block so it wasnt on the edge of the forks and plus where the hell is the ASV
This is so ridiculous ,the Case and the NH will have killed the Deere ,but apparently no one notice those two machine were not all the way against the block, RIGGED by Deere.
I use Deere skidsteers everyday and they are awsome machines lots of power and lift, kinda surprized the 332 lifted it without the counterweight kit tho and that the Cat couldn't. Would like to see where the operators come from. They should get each brands operator right from the dealer or guys that are partial the each brand, so they would do thier best, think some operators aren't trying as much as they could and its rigged for Deere to win. Case almost had it and its the only non vert boom.
The Case would of totally had it if the operator had the block against the back of the forks, and worked his tilt a little more. The Case was even lifting it faster than the Deere.
case had 6 in to the back of forks
tractorboy31 4 days ago
i'd take the bobcat
ThisMakesMeThink 1 week ago
The forks were not even in all the way on like half the lifts. Bullshit test.
SeizureBassist 1 week ago
An Insult to the intelligence of most operators.. They also forgot to bring in Takeuchi...
lenovot61tube 1 week ago
sorry but i still love are 2011 Bobcat S205
MrHeavygamer 4 weeks ago
Case never went full in. You lose so much leverage when you do that. and the deere is a parallel lift vs. a radial left. And there is a frickin John Deere logo on the thing they were lifting. Bogus, rigged.
joshtrel99 1 month ago 2
JOHN DEERE SUCKS!!!!!!!!!!!! IF I WAS THE BOBCAT OPERATOR I WOULD HAVE PICK THE JOHN DEERE UP AND TURNED IT OVER!!!!!!!! BET THE OTHER MACHINES WASNT RUNNING AT FULL SPEED,,,WHAT A CROC!!!!!!!!!!!!! JOHN DEERE SUCKS!!!!!!!!!!
CLYDEWALKER100 1 month ago
@CLYDEWALKER100 Don't use caps lock, it makes you look like a retard
TheJamesloy 1 week ago
I like Bobcat and Deere
MegaBOBCATMAN 1 month ago
john deere alway have to lair and cheat to win the case skid steer could pick it up easy if it got it right on the folk
MrValtrat140 1 month ago
It was advertisement for stupid deere
Porkypie99 1 month ago
why did so many people dislike this video because john deere makes the best machines in the world and always will for ever
reeceman151 2 months ago
The Cat 299C was missing the standard counterweights on the rear
waults 2 months ago
Im skid-steer operator and this is manipulated gay little contest.
snakeplisskenrecords 2 months ago
I like how the Case was set up and could still lift it.
455Sportsman 2 months ago
i understand why they didn't put volvo on here because it would have won
JaceJacksonGT 2 months ago
@JaceJacksonGT The new Volvo's are apparently just rebadged JCBs
MotoScootMech 2 months ago
@MotoScootMech actually JCB and Volvo worked together to create the best skid steer on the market and they did! So Volvo and JCB have the best skid steer today!
JaceJacksonGT 2 months ago
@JaceJacksonGT Ohh cool, did they write any articles or anything on the collaboration between Volvo and JCB? I'd like to read it if they did=D
MotoScootMech 2 months ago
@MotoScootMech ill research if they did
JaceJacksonGT 2 months ago
if our cat 906h can pick up 900lbs more than that block wieghs that cat skid loader should be able to pick it
bawchicawawa2222 2 months ago
the case could have if the weight had been all the way back and raised slowly. all comes down to operator error.
LeRoy5610 2 months ago
if anyonbe notcied the deere is 2 weight classes higher haha only reason it could list it
Farmingsimulator33 2 months ago
hell yah. deere leads in everything all you cry babys bitch'n just cause you cant afford it
spud921 2 months ago
@spud921 haha actually deere is one of the cheapest cause they suck this was put on by deere and its obviously fake
Farmingsimulator33 2 months ago
this contest is bullshit
keithtrivers 2 months ago
When the Case lifted it, but tipped forward.. the commentator said "not enough raw power"... W-T-F?!?! FAIL!!!
IceTTom 3 months ago
no Takeuchi? Why?
riversideland 3 months ago
Case would've done it if he put the load on the carriage instead of out on the forks another 10"... If you notice the deer shoved all the way into the block no gap between block and carriage...
shortbed70 3 months ago
lol cat probs had the best chance of lifting none of this generic new holland and most of all john deere, 3t is about the wieght of those bobcats...jd trying to make em look good....
oneplusoneequalstfu 4 months ago
I like john deere but that case and others was set up coulda been closer to the pallet. This is bulshit
nachos1990 4 months ago 9
@nachos1990 your bull shit
reeceman151 2 months ago
so big company and so small, pitiful cheat....
spawacz000 4 months ago
I'll never buy a JD based on this utter bullshit. Backfire marketing.
hdmccart 5 months ago 9
the case could have been in the pallet further
Tamyiatruckfan22 6 months ago 2
@Tamyiatruckfan22 so true.
Shame on Deere is right. I have the 2001 95xt and Ii have picked crazy loads...and he would have been able to scoot up on that thing and run away with it...that last 6 inches makes a ton of difference.
Sparpartner 4 months ago
Yeah you can see how far away the loads are from the others... Cheaters
drok59cc96 6 months ago
What about takeuchi,komatsu and kubota in my opinion deere sucks
SuperABS87 6 months ago
fucking jd trying to make themselves look good. FAIL. total shit if anyone was paying attention.
tma450 6 months ago 2
MAYBE IN SEASON 3 THREE THEY WILL HAVE KUBOTA
LC450ZAXIS 6 months ago
The case did what we call a "tip lift" is when he doesnt go all the way to botom out the forks before lifting.
farmboy26ful 7 months ago
This makes Deere look shity FAKE
Doggs27 7 months ago
JD should really think twice about posting this BS.
mdkrusemark 7 months ago
The Way theses thing tip is all on weight distribution so if you have a machine with the center of gravity in a different spot then it going to tip, so, this challenge, to me cant be caompared
ehemeyer25 7 months ago
44 people know that this is set up
THUND3R63 7 months ago
in my eyes the case won this competition. the case could have moved up another 8 inches. it had by far the most power.
candyandy211 8 months ago 2
and if it matters, the t870 and s850 both have optional 2 speed. top speed is 11 and 12 mph.
bobcats330 8 months ago
Bobcat S-850 R.O.C. is 3,950lbs and the T-870 is 3,525 lbs. but the t870s operating tip is 5000 lbs and full tip load is over 10,000 lbs. jd cant even complete lagitamitly because theyre published specs are fattened, ive seen the Bobcat Company specs breakdowns of the 2, the actual breakdowns, not the published ones that jd puts out. the bobcat was beating the jd in every catergory except pushing cap. but why push stuff when you can just pick it up haha.
bobcats330 8 months ago
es imposible con un tractorsito tan pequeño xD q lindos son quiero uno
Touristcl 8 months ago
Try the bobcat T870 NOW BABY!!!!!!
fishproet 8 months ago
this video is bullshit, if that weight is 6,000lbs, and they have the biggest production model made from each company then this shouldn't even be a problem for every single machine to at least get it off the ground, i have a cat 247b and i had a semi load of limestone delivered from canada and each rock weighed at least a us ton. and i lifted around 40 rocks off the truck, 5 feet off the ground and down to the ground with out tipping once, it has a 3,000lb max and i've pushed that to the limit!
jack888000 8 months ago
this is very sad that John Deer will agree to that mascarade it was clear that the New-Holland and the Case could lift that weight if there fork was all in............
screamingbull 8 months ago
this is some gay shit, the john deere is the only one to slide the fork all the way under the weight, if the case would have done that it would have lifted it with no problem
keithtrivers 8 months ago
deer sucks
DFPFilms1 9 months ago
a TL150 or 250 will blow any machine on the market away. Period.
TAWZace 9 months ago
Comment removed
CJPWNSALL 9 months ago
We used to do our own competions at jobsites but the other equipment dealers quit because we always won, then sold the machine to the guy.
bobcats330 9 months ago
if positioned right, a Bobcat T-300 will lift 6,000lbs. the other day i stacked rebar bundles (2000lb each) and lifted them, not high but all the way off the ground. Bobcat had a teat done of the T-870 vs the biggest JD, i think the 333d. the bobcat t-870 kicked the crap out of the deere in everything except pushing capacity. But in my opinion, the bobcat will still outpush the deere. i am biassed towards Bobcat since i work for a dealer but even so deere sucks. JD's specs are not true.
bobcats330 9 months ago
put the fork in till the cage touches and try it again
hardtop94 10 months ago
put the fork in till the cage touches and try it again
hardtop94 10 months ago
who was operating the other lifts? a toddler?
sprjcube 10 months ago
fucking bullshit!!!!!! The Case would have done it if...1- there wasn't a 4 year old operating it! come on...put the load ALL the way onto the forks!!! 2- this whole 'competition' wasn't fixed! John deere are for city landscapers who don't need a real skid steer. Bobcats are for people too dumb to know what an actual skid steer is!
Habsman37 10 months ago
MAth in my head . 2200lbs per ton 2200x3 = 6600lbs. SO the 6200lbs block is not over 3 tons as he stated.
gunnz23 10 months ago
@gunnz23 A U.S. ton is 2000.
culllloooo 10 months ago
@gunnz23 my mistake, either way this is a set up event and doesn't prove anything in regards to which comapanies machine is bettter.
gunnz23 10 months ago
ma va va !!!
gianlucaf9 10 months ago
...komatsu,jcb,takeuchi??!
bianconiglio10 10 months ago
How about we bring out a Cat D7 vs. the John Deere. Not even comparing spec to spec machines. Also operators are not placing forks all the way in. This is a set up. John Deere should ask that this be removed.
chickline1 10 months ago
what a joke
Ls7colorado 10 months ago
the bobcat operater didint even try
MadSun5 10 months ago
Another one of these videos. Jeez deere will do anything to sell their stuff.
tinkerman225 11 months ago
im a deere guy...but c'mon this is fake
dicin29 11 months ago
If the case put those forks in another couple of inches it could have lifted it!!!!
Bryanz098 1 year ago
deer wins
83995pedro 1 year ago
case wins
83995pedro 1 year ago
if that case's forks were pushed all the way in it would ahve picked it up esaily
kkg0711 1 year ago
Retarded video
clovakid 1 year ago
It is LAME that deere cheats in contest to make themselves look best. If you cheat you don't really win at all. Some people are probably stupid enough to not notice the Case operator didn't position the load fully under the load. The Franklin's first attempt wasn't fully under the load either. Looked like it may have been on the second attempt.
specialks1953 1 year ago
CASE lifted it even without the forks in all the way. So if they were all the way through CASE would of won. DEERE lifted with the forks all the way through from the start. Know for a fact if DEERE forks werent inserted all the way, it couldnt lift anything at all unlike how that CASE did it without being fully inserted, and still lifted.
winsumsoon88 1 year ago
I believe that John Deere had leader than all. because I used them often times since there is excellent designed. Long time I worked there. Cat and other kinds are not easy.. I only prefer to use John Deere is more comfortable for me to work there. Depend you had good skill.
railroad007 1 year ago
This video is bullshit. You can see that all the other skid steers didnt put the forks all the way into the bock of cement.
toro74449 1 year ago
sa ce vois tro que ces truquer le case prouver le lever si il laver prie comme y fo
guillaume82240 1 year ago
@guillaume82240 Apprend a ecrire esti d'incompetant
toutnu 1 year ago
this is an embarrassment for john deere its plain rigged shane on them totle B S
johndeeregreen9987 1 year ago
i bet that john deere desingns a skid steer just for these compitions
customs32 1 year ago
I call B.S.
jackel440 1 year ago
How retarded..Did you see all the John deere equipment in the back ground ..of course they wouldn't let another machine win...lol rigged man
stitsenj 1 year ago
John Deere, just how stupid do you think the American people are? That is so obviously rigged, although John Deere has a fine skid steer, I've had my 4475 for 15 years with zero break downs, I would have thought John Deere would have more class than this.
MACmx33 1 year ago
thats fuckin bullshit!!! the case and new holland didnt even put the forks in all the way! real cheep JD... the case had that thing no problem if it pulled up all the way
TomCRitucci 1 year ago
case needs to tilt the forks all the way back for a stable lift this is new operators or just fake shit...
rocsvt1 1 year ago
this i dum, i have a 236b cat and i could get that up no problem
ROOSHDOG21 1 year ago
the case could have done it if it was 6 inches closer to the block, those 6 inches is enough to severly get it off balance
tractorman96 1 year ago
this is fixed paid by john deere
RAMPLA83 1 year ago 10
my 299c could of lifted that u could tell he didnt have the forks in all the way in half of them
crackcrackkorn 1 year ago
this is fixed.
chirssaunders09 1 year ago 7
a takie TL150 would do that no problem. We all know this is a deere show though cause u see there equipment lined up to the left. Look up this vid " Takeuchi TL150 Skid Steer Benching 7000LBS! "
TAWZace 1 year ago
just wasted 5 minutes of my life..... thanks deere.
jesdanrich 1 year ago
This has been flagged as spam show
at 2:35 that CASE could' ve made it if the forks are all the way in
procarpio 1 year ago
at 2:35 that CASE could've made it if the forks are all the way in
procarpio 1 year ago 3
@procarpio LoL they are trying so hard and the case just comes out and picks it up like its nothing :-))
Risenangelicaegis 1 year ago 2
The new bobcat t870 has about 3400lb ROC and the s850 has almost 4000lb Roc. For bobcat their roc is usually about half of tip. I use a t-300 to move things including other skid steers, especially the new holland trades we get. This is typical crap from a company who sells more tee shirts than equipment.
bobcats330 1 year ago
cat 3 ... get the fuck out of here the order at the end is backwards
kubotaboy123 1 year ago
thats ok the new bobcat t870 and s850 will show john deere and everbody else what a real power lifting beast skid steer is and it can lift that thing 12 feet in the air. deere cant do that ever
bobcats330 1 year ago
u are lieing fools none of that is possible
stevetouchdownsmith 1 year ago
the bobcat t-250 is a brutus machine and is a pusher, and heavy mover, an unstoppable beast. there is a reason why most people commonly refer a skid steer loader or CTL as a bobcat. the other brands dont really compare when you actually use them on a jobsite.......
bobcats330 1 year ago
This is setup by john deere but there is a few flaws. i work for a bobcat brand skid steer dealer and i did this test myself. here are the results- the tip load on a 320 and 300 are the same and the 300 wont lift it either. bobcat t-250 WILL lift 6000 lbs and not tip, the reason, its a radius path . i use a t-250 for a rebar loader at work and unload the rebar del. truck 2 bundles at a time(2,000 lbs each). if they got a t-250 they could've carried that thing back out to the truck it came in on
bobcats330 1 year ago
on the bobcat there not even using the d650
geini20 1 year ago
in bobcat there is a 330
geini20 1 year ago
its funny you notice john deere is the only brand putting on these smack down competitions
GMCandChevyOnly 1 year ago
I'm just as much of a redneck as the next guy, but what crowd would have tht much enthusiasm for lifting a concrete block? haha could those possibly be JD employees getting a bonus?
dieselfanaticIN 1 year ago
its like makin a show sayin im the best and im gonna put my picture everywhere and im gonna win so u guys act like u cant do it...srry smackdown? yeah just as real as the wrestling smackdown
bobbyhill789 1 year ago
thats y they had the biggest john deere loader they make
bobbyhill789 1 year ago
The Case and New Holland machines didn't even have their forks all the way under the pallets!
Seriously, does deere think that potential buyers of their loaders would not notice that? Do they think we've never haulled pallets before? Lame.
I mean c'mon, these are put on by Deere and their machines win every event. They can't expect anyone to take this stuff seriously.
bluequiltedness 2 years ago 3
I operate both Deere and Case skid steers, did ya notice the load was farther out on the pallet forks on every try but the Deere?
But i still bought a Deere
timothy8727 2 years ago
@timothy8727 ya i saw that, i was yelling at my monitor saying this bs thinking i was the only one who noticed
hondakseries 1 year ago
The case easily can lift that but it has no rear wait. No counter balance. I like case and i operate a case but i hate that it has no ass end weight.
fox13z400 2 years ago
this is fucken set up
hondakseries 2 years ago 38
@hondakseries yea this whole smakcdown thing is set-up. There is no way that john deer is better in all things. I mean I like john deere we use them at my landscaping buisness but we have a cat skidsteer and case that work just as well as ours deeres
JTyler52 1 year ago
@hondakseries this was definitly sponsored by deere
hlandscaping17 10 months ago
@hondakseries yep
Tamyiatruckfan22 6 months ago
Rigged!!! notice that THIS IS A John Deere dealer. asses, jerks, morons,idiots, crooks,scammers...
This teaches all the kids this crap is ok!
they should have rioted...like in the euro soccer games... teach them a lesson.
addvanced 2 years ago
rigged stupid waste of my time
tizzlepete 2 years ago
First of all look at the side of the track on the bobcat it says ROLLER SUSPENSION which takes about 400lbs off the roc of the t320. And why does that iddiot in the t320 keep moving the machine side to side. These guys are not operators. The case guy should of lifted it but his forks werent in all the way. This is rigged
MISTERSOPS 2 years ago
thats funny when my dads old s763 can list it
but not the t320
his new s165 can tip it and do it but not with 6200
redneckwheelman2 2 years ago
funny how that block is the same weight as the bobcats rated operating capacity but it couldn't lift it???? I'm thinking they fucked with the pressure by-pass valves on some of these machines. I'm sure the new Holland could have done it too, these videos have really turned me off to deer and i liked some of there bigger stuff too. these are shady sales tactics
peebsb 2 years ago 2
That is just embarrassing for John Deer, Those few inches on the forks is enough to unbalance any machine.
Shame on you JD
haggis 2 years ago 27
It's funny how Deere set this up including opperators that are paid by them and only God knows what they did to their machine to performe better than the ones we buy and still so far every bodys oppinion here is tha the Case outperformed the Deere ,I guess if it was a public fair where every body would bring their machine, Deere will try to buy back every single machine that they have sold so that non Deere machine will participate, my guess is that this show has back fired on Deere WAY TO GO.
stnghgg05 2 years ago
first of all this is total bullshit the case could have easily did it if he curled the block so it wasnt on the edge of the forks and plus where the hell is the ASV
XCrankedvoltx23 2 years ago 2
This is so ridiculous ,the Case and the NH will have killed the Deere ,but apparently no one notice those two machine were not all the way against the block, RIGGED by Deere.
stnghgg05 2 years ago
I use Deere skidsteers everyday and they are awsome machines lots of power and lift, kinda surprized the 332 lifted it without the counterweight kit tho and that the Cat couldn't. Would like to see where the operators come from. They should get each brands operator right from the dealer or guys that are partial the each brand, so they would do thier best, think some operators aren't trying as much as they could and its rigged for Deere to win. Case almost had it and its the only non vert boom.
anewbeggining21 2 years ago
the case would have done it with a good operator
maxottobell 2 years ago
The Deere was almost ready to tip, there was over 2" of air space under the rear idlers.
A more fair test would be to take 400 pounds of weight off the concrete block, then all machines could compete more fairly.
69rd96 2 years ago
Man! The Case almost made it!
If it would've had vertical lift it would've done it.
Go CASE!!
WillieWonka928D 2 years ago
The Case would of totally had it if the operator had the block against the back of the forks, and worked his tilt a little more. The Case was even lifting it faster than the Deere.
IROC4LIFE 2 years ago
Comment removed
WillieWonka928D 2 years ago