Added: 4 months ago
From: OhhWhiteout
Views: 41,463
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (403)

Sign In or Sign Up now to post a comment!
  • I have 1.2.3, and it works for me, lonemccracken. check the ticks on your repeaters.. if that doesn't work make sure you positioned the steps correctly (I messed up one :P).. finally, make sure that once you step on the pressure plate you don't press anything on the keyboard or it screws up the chain of events.

  • this is genius and a good tutorial

  • OH MY GOD YOU HELPED SO MUCH! Others were to complicated but this one was really simple! THANK YOU!!!

  • I can't make it work, personally when i place the redstone it becomes one single little dot, instead of a fourway leading. but putting a villager in the machine makes him fly up, when i try i get stuck in the middle. i have tried changing the repeaters tick, but didn't work, am i supposed to change anything in the bottom?

  • @darhaxor The redstone being in the dot doesn't matter. The texture was changed in 1.0.0. But if you are getting stuck, check your repeaters, especially right around where you get stuck. If one repeater is off by ONE TICK, it won't work.

  • solved

  • i get stuck at a certain point...... :/

  • Awesome! works very well, thanks for the tutorial

  • still works in 1.2.3 ;) ur just high/stoned as hell

  • Comment removed

  • thank you soo much this helped me alot! bravo

  • doenst work in 1.2.5

  • i dont think it works anymore, well i dident work for me i just stop after about 4 blocks :/. it workds on testificates though....

  • i have been acroos lot of these zipper tourarials and i have noticed that most peepz chose wooden does it make a diffrence if i change it to wooden is it faster?

  • Thanks, works fine for me! Good tutorial btw.

  • everyoen i figured out why you get crushed into the blocks! if you go to the back of the elevator the bottom left piston needs to be at 1 tick! like so everyone knows

  • only 1 side work plz help

  • @OhhWhiteout I have the same problem as TeamSociallyAwkward, so what should the solution be?

  • @dachshund103 Derp

  • i have build two of those elevators.... one is facing east and the other is facing south and the one who is facing south is going slower to the top.... is this normal?

  • Hey, does this still work in 1.2? Because I just get crushed by the stairs, and don't go upwards.

  • @DHGameStudios i think it still works... The Yogscast did it on a snapshot... but I don't know

  • @DHGameStudios It should still work. They didn't make any changes to the way redstone works, at least not any that were noted.

  • @OhhWhiteout Well its not the redstone that's the problem, its the stairs collision with me. I just don't go upwards! :O

  • @DHGameStudios works for me

  • @DHGameStudios It does work, just made an elevator to the top of a jungle tree :)

    Between thanks for a great tutorial :D

  • @Phauglin99 Alright thanks, Guess its just my server then. Guess I'd better upgrade then xD

  • @DHGameStudios yeah there are a couple changes with redstone but this still works, id first check that the repeater under it is clicked once and then check all the other repeaters to check that they are still set at spawn time

  • @minecraftn00b07 Again, the redstone works just fine, but my server seems to not be good enough to make it work.

  • Multiplayer?  1.2.3?

  • can you make a smaller verision

  • @sweguy98 A SMALLER version? This is about as small as it gets.

  • Sehr geil

  • Only works on one side

  • only ever works on 1 side

  • i will try it

    :)

  • how do u get down?

  • Unfortunately, this design, ingenious as it is, does not seem to work in multi-player.

  • @TeamSociallyAwkward It really depends on the server, and how much ram the server has. It's hit and miss. Some people though have said by changing all of the repeaters to another tick setting made it work. Maybe try that.

  • @OhhWhiteout Does It work with stone stairs?

  • @TeamSociallyAwkward why not, redstone is not affected by it been single or multiplayer, it works for me, so im pretty sure your doing somethign wrong.

  • @OfficerSweetboy It's because of lag. Lag slows the ticks down on large servers and causes this to not work.

  • @TeamSociallyAwkward O hell it works

  • I did it in single player (works perfectly) and I did it in my favorite server today. I had to tweak it a lot in the server, because of the lag I got stuck between the stairs. After changing all the repeaters that go to the pistons to "2" and then in the "control room" under the elevator I changed the 2 repeaters to "2". Actually I'm not sure, maybe the left one is on 2, and the right on 3, but it works in multiplayer!

    Instructions:

    1.Go with your back inside.

    2. Hold A and D.

    3. Should work.

  • in 1.2.3 it seems to work fine, i put a villager on it and it goes up. But when a player tries the stairs dont lift them and continue on without the player. HELP? D:

  • what kind of... nvm.

  • it doesnt work in 1.2.3, if you could come out with a new tutorial that would be great :)

  • @lonemccracken it save

  • @lonemccracken It works

  • why didnt it work on my server?

  • oh yeh and in 1.2.3 if u put the redstone lamps next to the outside torches that facve towards u the lights go on and off wih the psitons :)

  • @roddersskate It works :)

  • wow cheers, all the other ones with platforms were too messy

  • this is working great in 1.1, and it also works in survival mode ;)

  • Does this work on smp

  • great tutorial, just what i was looking for :)

  • great job

  • it works on 1.1 but when i update to 1.2.3 it doesnt work anymore -.-

  • no longer works in 1.2 :(

  • Hey everyone it works for me perfectly try and see if you have the wiring rigt

  • i got the mechanism to work, but when i get in it i only go up about 5 or so blocks before i get stuck in some blocks and then fall down, however if i spawn a villager on the plate he goes all the way to the top without getting glitched, this is on smp btw

  • yeah exactly

  • in 1.2.3 it doesnt seem to work, i always get stuck after like 3 blocks and it doesnt take me to the top

  • What do i do if the stairs dont push me up in 1.2.3?

  • can you make this thing go downwards?

    that would be awesome

  • Doing this on the new world height in 1.2!

  • Vdude I built it from sea level to sky limit in an

    hour non-stop!

    Anyway thnx for tutorial!

  • Does anyone know how long it takes to build from sea-level to new sky limit? FOREVER!

  • Doesn't work in 1.2 apparently

  • its cool,but its slower then the fast piston elevator. this one needs 2 seconds for 10 blocks. the fast piston elevator needs just 1 second

  • @monstrum467 But I'm sure this was simpler and easier to build

  • Awesome tutorial bro, you should make more :)

  • thx man :)

  • How was he able to place stuff soo far away? Help? Like what mod?

  • I don't think this works anymore.... It worked yesterday, but now that 1.2 is out, it doesn't work. NOOOOTCH

  • @suchahipster It does work still, I know cos I literally just made it to world height on 1.2 :3

  • @JezzaW123 Does it work on servers? I made a similar elevator but I always bug trough on a server.

  • @JezzaW123 I think it's something to do with the servers, because it works perfectly in my single player, but on my friend's sever you just go through the first block and fall.

  • @suchahipster Yeah, I made it to world height on SP and that works fine, but on my server it doesn't work. Everyone's complaining it doesn't work, IT DOES, just not on servers yet :)

  • @suchahipster jeb and jon

  • HELP the stairs just go through me right at the bottom is it becos of the new update? cos it worked okay before 1.2 came out

    

  • @melvrick028 yes it does i just did it u probley made it wrong try again

  • Stairs go right through me, having tons of problems and spent about half an hour making this thing to the new game's max height. Starting to rage a tiny bit, any ideas Whiteout?

  • @MuffinManQuast I followed it exactly but on a higher scale, also now all the pistons are stuck on the 'on' position.

  • Kind of a dumb question, but could lag effect this? Like, could lag prevent this from happening and just make you stuck at the bottom of the elevator?

  • Made one exactly how you did it, but from bedrock to the new height-limit of 1.2.3. I go through the stairs, could it be something with the patch..?

  • @lordArturK make sure you did it exactly the same because im doing it and it works fine.

  • i tried this but even though i checked the redstone and followed the video, i still go only1 block then stop but the elevator keeps going someone help me

  • Thanks

  • @Ninjasimmo Check the repeaters and torches at the top. If you leave all repeaters set at default, it will be at the fastest setting. So make sure you haven't set them to two.

  • @OhhWhiteout I´m sorry to say that this design does not work for 1.2.3 :(

  • i made it before and it works great but this time im having trouble :( the top 2 pistons i think arent firing so it doesnt get me the whole way up and its really slow compared to yours :( any suggestions?

  • That was good.

  • It was good

  • @1337Roflc0pt3r Don't worry about that. They changed the texture in 1.0.0. The dot will still work fine, just make sure it isn't a line.

  • My redstone won't place in a '4-way' not sure why

  • THANKS man! really usefull for me since i like building high buildings :#

  • yo

    

  • it is awesome thx

    

  • Awesome thanks for putting this video up

  • Thanks

  • cool but 1 question ... how do you get back down without hurting yourself ?

    

  • @Theshortfulone Check and make sure that all of your repeaters are set at the same amount of ticks. One repeater being off by one tick will make that happen.

  • @AnonymousKev Have you tried slowing it down by changing all of the repeaters? Someone said this helped.. I haven't tested it though.

  • This was really helpful, thanks for making it!! :D

  • I used to make these but the lag became killer in 1.1 with anything past 30 blocks up.

  • Lol, almost never works in multiplayer.

  • Hey anyone know how to fix the stairs going through you?

  • I DID BUT WHEN I WAS PUTTING THE TORCHES IT JUST STAY ON LIKE GLOWING AND ALSO WHEN I WAS PUTTING THE PISTONS THEY STARTED TO EXPAND LIKE IT HAPPENS

  • Stairs are going through me rather than pushing me up. You know what's happening?

  • how'd u find this out?

  • Rofl... Morons....the circle is the updated appearance of the 4 way... Now stop crying and make yo elevator!!!  P.S: didnt mean to be harsh! ^_^

  • @OhhWhiteout it was filmed in 1.9 pre-release

  • It Isn't A 4-Way Redstone If Ur On 1.1 It Is Just A Circle

  • The redstone doesnt do 4-way -_- help

  • when i placed down the redstone going up the front it doesn't do the 4-way thing, its just a red circle?

  • @nathanjamesford it doesnt matter, i tried it, enjoy

  • It didn't work, maybe it doesn't go fast enough on multiplayer?

  • @nickizzo5 Just kidding read the description disregard that comment xD

  • Success rate of ~1/100 in SMP -____-

  • thanks alot this will help alot with me getting even better than i am at minecraft

  • WORKS GREAT! Thanx

  • i tried it but i only got three blocks up they all worked but i didnt move up anymore

  • But anyway to get down as fast?

  • Thanks dude. Really helped alot

  • 2 fast on smp

  • Thanks man it works!!!

  • when i put down the redstone dust it only makes a dot,not a 4-way what am i doing wrong?

  • @MrJiwiCharms it does that in the new updates, its still a four-way dont worry bout' it

  • This doesn't work in 12w08a...

    That's effing bullshait!

    The reason is, that the pistons are to slow, so they close 2 at a time, not only 1 :/

  • HEY GUYS COME TO MY HAMACHI SERVER ITS SUPER HOSTILE LEGENDARY LIKE GUUDE AND BDOUBLE'S MAP IP:Minecraft shifor PASS:1234

    HAVE FUN!!!!!!

  • jeez building this in 1.2 by hand takes foreva!!

  • Comment removed

  • Thanks!!

  • hey dont be harsh on me like minecraftbb762 (you were a real asss to him) it only shots me up half way, but all of it works, plz help

  • Short and Simple, thanks! :D

  • @TubyW0lf Check and make sure the repeaters are all set at the same timing

  • @Thisisadarkride Check and make sure all of the repeaters are set to the same timing

  • @OhhWhiteout help i go inside the stairs O.o

  • @LeooooonScottKennedy Check and make sure all of the repeaters are set at the exact same timing

  • @OhhWhiteout they are..... -_-

  • help the stairs just go through me

  • @LeooooonScottKennedy Yes it does that for me too, it pushes me onto the first stair then the rest just go through me, even if alternate blocks and stairs the whole way up. Help, if you could please?

  • @LeooooonScottKennedy You're probably in multiplayer, right?

  • @LeooooonScottKennedy I guess that this is just the way 1.1 works now, oh well, screw zippers, we need a new elevator system

  • It doesn't carry me up why is that?

  • Built it 25 high and it went and operated in sequence perfectly it did not carry me up though

  • one of the best tutorials on youtube nice job :)

  • I Copied it on pre 12w07 and it no work help plzz

  • this is great. all these people are stupid! i copied it perfectly and it worked great!!! you are good at redstone

  • Didnt work but i can use this as a trap! Thanks!

  • bro i did i in 36 high and only half of it works plz reply back =)

  • @smalleyes707 What exactly is happening? Are both sides lit up?

  • @OhhWhiteout is there a way to show u the map?

  • @OhhWhiteout pls help only one goes up

  • I'd like to see a pair of pistons at the top that push u onto a platform so that you don't have to rely on your quickness to stay alive.

  • @minecraftbb762 Lol. Thank you for giving me that entertainment! You are seriously stupid. It works, you didn't build it right. It's not my fault that you can't follow simple directions. Also, at least I COULD work at McDonald's.. You couldn't, considering you can't spell anything to save your life. Trolls. Lawl.

  • wow great video rly helped!

  • Fuck u Ur A fucking dumb shit this doesnt work for fucking 1.1 and you said it did thx alot i just wasted a whole fucking ten minutes doing ur dumb fuck elevator and i had to listen to ur fucked up voice who probabaly works at mcdonlds and lives at his moms house

  • @minecraftbb762 Lol omg if you raged anymore your tiny penis would split in half, clearly your time isn't worth much if you're playing minecraft so close your mouth before anymore ignorant bullshit falls out of it. If you follow the directions, it'll work.. If you don't it will not. Simple stuff 8th grader.

  • @abneywins lol im in 7th grade and this was pretty easy to do, i finished it in no time.

    though at the top i had to jump to get off the elevator or else i would fall back down, so i hooked up some pistons to push me forward :)

  • @minecraftbb762 Did your mom drop you when you were little?

  • @minecraftbb762 so u moved out of ur 'mums' place and u play minecraft?

    thats a sad 30yo right there

  • holy shit it doesnt work

    

  • And with the new Snapshot out, it brings you from Bedrock to space. xD

  • @roy20050 907% sounds like you made it over the top.. :o lol but anyway, check your repeaters and torches at the very top, and make sure everything is set right and consistent.