First Gear Refuse Replicas (Wittke + McNeilus)

[oppat99]

how much did you get it for? (please respond)

[MitchellM15]

@oppat99 When I got these they were around $100 each.

[joremifaso]

are you mat if you are long time no see also im geting those trucks

[Alexsslawncare]

I live about an hour an a half from Mcneilus steel!

[michaelgraddy019283]

i love garbage trucks!!!!!

ive been wanting those for years

[zeuqsav]

I have these two plus the side loader and the roll-off, in my collections.

[nikkimellina]

you failed

[MrPinto1970]

are thay rc

[nuffshotz70]

I work for the dept of sanitation in new york . Do you think they have replicas of our trucks???

[MitchellM15]

@nuffshotz70 Umm I'm not sure to be honest, surely they would?

[FormerWMDriver]

@nuffshotz70 Yes, I know for a fact that there are DSNY rear load trucks out there. They look like the truck shown at 2:45, but in DSNY colors. I think they have some front loaders out there too (you all tend to call them E-Z pack trucks) and they look just like the WM one at the beginning of this video, but again they are in DSNY colors.

Unfortunately, there are NOT many of them available, you'll have to watch Ebay and hope for the best. Usually they are overpriced... $100+ due to rarity.

[MrEntertainmentVideo]

do the gears move??

[420420187]

GET A LIFE

[alecdragonrider]

awsome love the BFI RL

[chris534xrs1]

are these rc?

[MitchellM15]

No they aren't, be pretty awesome if they were!

[chris534xrs1]

it would and thx

[MrConnor2000]

where do you get your rubbish trucks?????????? please tell me i love garbage trucks

[MitchellM15]

These First Gear replicas were mainly from ebay, with one bought from a Hobbyco store. The other ones I have were bought by my parents when I was younger...

[billgomezsr]

wardawg07 you are stupid

[kaleighfoley]

my birthday is may 29

[xplayermk]

without garbagetrucks the cities would be adump

[dogmen51]

sick trucks! where do you get them?

[MitchellM15]

ebay

[wardawg07]

nice trucks

[consolidateddisposal]

How do you make the packer move? I just got mine 15 minutes ago and I need to know. I searched videos and can't find any.

[consolidateddisposal]

Also I forgot to mention for the fl. Thanks. Also great vid 5* and fav :D

[rempledisposal]

did u get any trucks from garbage guru or simewhere else and hw much for each ? great vdeo do u think u could get action footage? :D

[MitchellM15]

Yes I got some from garbageguru, the prices I can't recall, I do have action footage of these trucks and I'm not the only one with videos of First Gears... plenty to find =]

[rempledisposal]

lol thanks i just orderd 5 more trucks from him and i have 2 prior ones :D

[nothingTOXIC01]

at0:5 that front end garbage loader were do you get the bin ?

[MitchellM15]

Comes with the truck.

[FireKid152]

sweet ive got the mack at 3:29

[audi48]

takie sobie

[colinj76]

you bunch of sad bastards GET A LIFE !! or a woman and you might grow up abit

[robinsonm08]

mitch is your first gear rl modified does the packer move all the way up and down

have you looked at the the garbage guru website im getting a first gear rl and he is takeing off the dumpster bar lift and makeing the packer move all the way up and down

[MitchellM15]

No I haven't modified it

[robinsonm08]

does your kerrier plate sweep up and down im getting a mack one off garbage guru it cost $92.00 the plate will sweep all the way round with custom work done on it

[Ferretguy55]

ya but wat did u put in the search bar to find it

[MitchellM15]

Just things like First Gear refuse garbage truch trash recycling and so on.

[Ferretguy55]

yo were did you find the veolia FL first gear truck it was at the end of the vid i was looking for that truck forever but couldnt find it anywhere

[MitchellM15]

Just found a pic on the net, there's probably one or two on Ebay.

[robinsonm08]

are they all yours

[MitchellM15]

Only WM and Ray Bros

[SNOSTER1]

1st gear rocks!!!!!!!!!!i have the nyc refuse truck,i also customize newray trucks,so they look like the delv trucks in nyc.

[NickFourSpeed]

thats cool how can i get one

[MitchellM15]

As for the little trucks try local stores and for replicas try First Gear and the larger toys try BRUDER. However you can get most of these on Ebay... much cheaper.

[NickFourSpeed]

great thank you

[dueltruck700]

waste management was giving these away in st johns Nl awhile back.....sad i wasnt there to get one danm!

[MitchellM15]

Giving them away for free?!?

[godzilla3dyo]

what kind of trash truck with the dog was that?

[MitchellM15]

You might be talking about the Bulldog one from memory, it'd probz be one of the HEIL SLs...

[mechagodzilla2008]

what song is this?

[MitchellM15]

"Sunshine of Your Love" by CREAM

[smashthetrash34]

wm replicas now have a heil python sl thanks mitch

[smashthetrash34]

ithink wm is the best compiny thanks

[bronco1523]

Genial.

[alter656667]

What is the scale

[MitchellM15]

I think it was something like 1/34 scale or something...

[steven8979]

cool!

[steven8979]

can you get those on ebay.

[MitchellM15]

Yep!

[Jabbajawz4life]

How much was the RL at the Retail Shop?

[MitchellM15]

Depends where you get it - it'll probably be more expensive in retail shops than Ebay - in my opinion Ebay's the way to go unless you find a price you can't beat

[Jabbajawz4life]

I already have a rearloader its waste connections watch my viedo called My 4yd2 and i wanted to know how much u paid at the Resale.

[MitchellM15]

I've already seen your vids. What you mean by "resale"?

[Jabbajawz4life]

I thought you bought yours from the resale i must have made a mistake by overreading somethind my bad and i modified my truck.

[ranger220022]

Just go to your nearest mack truck dealership,its where i got my front loader.

[laughoutveryloud]

can you get these trucks at astore in california

[MitchellM15]

No Idea... probably!

[LUISP1957]

That depends, where are you located?

[KingAdamTheGreat]

i liked the truck with the american flag skin and the one with the tiger strip skin

[Mafy0s0]

where did u get that truck from

[MitchellM15]

The FL from Ebay and the RL from a retail shop here in Sydney!

[laserkeyboard]

LoL. yOU pIcKeD uP a BiN dA wRoNg WaY

[CaptainGrevious]

I used to love the smell of diesel and garbage at 5:30 am in the WM yard.

[CaptainGrevious]

The old burgandy ones are much better before WM was taken over by the big green machine, long live burgandy-driven by pride. And Allied will never escape the big shadow thrown by BFI.

[Semitruckman101]

Amen to that!

[trashmaster684]

Where did you find the BFI trucks?

[MitchellM15]

Image from the web!

[andrefromnguyen]

wen i grow up i wanna be a trashman XD

[airbusA321boyy]

yeahaa city of chicago thats what im talking about

[AIRMAN217]

sweet where did you get it from

[MitchellM15]

EBAY... also at Hobbyco, a shop here in Sydney!

[mytujuan]

Very good....

[blackhawk777]

make a review on these trucks, like show all the moving parts and stuff.

[MitchellM15]

That's an idea!!

[racrewe]

Do you have to remove the cab cover to use the packer

[MitchellM15]

You have to, to make the packer loose, though you can operate it basically with-out removing the cover - it can be put back in place!

[racrewe93]

Hoping to get the front lader

[racrewe93]

Does the cab shield clip on and off?

[MitchellM15]

yer, small kind of struts hold it in place!

[racrewe93]

Got the packer working on mine.

[MitchellM15]

AWESOME!!! Happy for ya!

[racrewe93]

Hoping to get some vids put up of it

[MitchellM15]

Awesome!! GOOD LUCK and all the best!

[racrewe]

Im thinking of buying one.

[racrewe]

Do these trucks eject their loads.

[MitchellM15]

They aren't built to eject there loads, though if you make the packer loose (it's glued to the body) you can push the packer all the way through the body and gradually eject the load!

[racrewe]

Are they worth buying.

[MitchellM15]

Definitely!

[peterbilt31]

You got some cool toys there!!

[MitchellM15]

I like a variety!

[90skindaguy]

are there any other WM toys?

[MitchellM15]

If your referring to the replicas... it is just the general FL, RL & RoRo! The ASL version is coming out this year if I'm correct! With toys I'm not sure!

[90skindaguy]

we can only hope... LOL

but this is a GREAT video

by the way, are the hydraulics on some of these weak, in your opinion?

Ive seen a lot of videos where they are either broken or missing

[MitchellM15]

NO, the hydraulics aren't weak!

They eventually become loose if you continuously move them - when you first buy them they are stiff so they don't fail! Also, the screws that hold the hydraulics in place may become loose for the same reason resulting in the cylinders falling off (you can put them back in place if you find the screws). Otherwise they might be removed deliberately for a certain purpose! Hope this helps!

[Trashman242]

Nice editing and I know I've heard that song, just can't remember the title!! Great job, Mitch!

[MitchellM15]

Thanks!

It's "Sunshine of Your Love" by CREAM

[Trashman242]

Should have known, my dad listens to them a lot! haha

[jeepman65]

Love your videos Mitchell, keep it up!

[MitchellM15]

Thanks and will do!

[macdonaldjohnstonfan]

Nice trucks!!! I'm trying to get a Brder RL!!!

[MitchellM15]

Thanks, I would highly suggest to you that you look into buying these trucks! They can easily be found on youtube! My parents got me the Mcneilus RL at hobbyco and there is another one in stock! I just got my BRUDER ASL on Sunday, had 7 in stock and 4 garbage can sets - got two sets!