You say the injectors are rebuilt, are they still 370? or did you have em built higher? Cause the way my Z sits now, i am running 10.5 psi on stock 370 injectors with a Ztuner Stage 3 ECU, it has been tuned, and then i have divorced down pipes with 2.5 in cat back exhaust with X pipe...and intake...but when i run it now i can get the injectors up to 85/90% of their duty cycle with that set-up.
Just kidding, that car's amazing. Looks great, sounds great, loads of power there, just like a Z should be. No doubt that thing's eaten a few V8 Commodores and XR6Ts in its time ;) a true gem. I might just get a white one, looks good with the black bonnet.
Did you have a problem fitting the 19" wheels on your car. I just ordered some and now I am worried that I will have to roll the fenders (19X8.5/19x10) .25 front/.40 rear. What do you think? Thanks
Australia always gets the nice Japanese vehicles. US TT's only came in 2 seater coupes. I guess they cbf to ship fun cars all the way to the states. Cheers on the great ride!
you should def do the auto to man swap. get a 99 jdm non turbo 5 sp. thats wut is in my z. im running 413 hp and 453ftlbs. i walk stock twinturbos by 5 cars. honest! mods include stillen stage 3 chip, mild cams, stillen high flow intake and cat, larger downpipe, upgraded gt500 turbos @16psi, 2hks ssqvs recirc of course, royal purple oils, stillen smics, and borla exhaust. theres a few more power adders as well. do the swap, you wont regret it
Very Clean Z ! Much props. But seriously, I need your help SIM300, are those OEM mudgaurds on the z? If so, please help me out to where i can purchase some. Ive been looking for those since i was 16 when i bought my z, at that was a lonnng tim eago !
emissions standards not dynos.americas more whatever when it comes to eating up the ozone and burning us all alive. lol so we get luckey with the airflow.
comment below didnt reply what i wanted to. What WHP did you make? 343.4whp? whats KW? i made 356whp & 368ft. lbs torque on 93 octane. with stock turbos,stock injectors and bolt ons. you have bigger ball bearing turbos other port polished stuff. who tuned your car?
I wish I had this car, Saw a 300 TT on autotrader once going for $3500, but was most likely a scam. Im pretty sure later model stock 300 TTs depending on mileage and condition can go anywhere from $5000 to $10,000. Not too bad imo.
I don't understand what you're trying to say. But doesn't all TT have T-tops? And the 2+2, slicktops, and convertibles are not turbo. That's what I'm trying to say. Unless you live outside the U.S. All 2+2, slicktops, and convertibles that has turbo are conversions only, not stock. Now, do I make sense?
You can get them for around 5 grand, but be careful because they probably aren't in tip-top shape and would probably need an engine check-up and possibly a rebuild before you go trying to pump 400-500 horsepower out of the engine. I got mine for 10 grand.
one question mate, im gettin a 300 but an auto, im contemplatin going for a manual for upgrade reasons. i was wonderin if you know where about you can tune an auto up to in terms of horsepower thanks...
Not true at all, 600hp on a stock oil pump in an RB26 will kill it quick. The VG is able to run over 500hp daily without a problem. There are also many more parts to change on an RB26 which make it more costly to get to 600hp. I have a lowly RB20det in my car though, so im not even on the same level as these beasts!
people that want to put rb's in z's are really just retarded.. vg's are capable to plenty of power, just as an rb is.. vg's aren't exactly highly publicitized so people don't know.. it is a cool though
agreed, and what i think is funny is most of the ppl i talk to dont care about torque, even though an VG making the same hp as a RB will make about 200 more ftlbs.
You say the injectors are rebuilt, are they still 370? or did you have em built higher? Cause the way my Z sits now, i am running 10.5 psi on stock 370 injectors with a Ztuner Stage 3 ECU, it has been tuned, and then i have divorced down pipes with 2.5 in cat back exhaust with X pipe...and intake...but when i run it now i can get the injectors up to 85/90% of their duty cycle with that set-up.
nickjlee 1 year ago
@nickjlee
Yes, they are still 370cc. I had them rebuilt & flow tested. This is an old video & I now run Nismo 555cc injectors.
sim300 1 year ago
Woo, Pendulum XD
Just kidding, that car's amazing. Looks great, sounds great, loads of power there, just like a Z should be. No doubt that thing's eaten a few V8 Commodores and XR6Ts in its time ;) a true gem. I might just get a white one, looks good with the black bonnet.
BrEnNo1023 1 year ago
@BrEnNo1023 too late fool, you got a silver 2 seater.
but it still hauls arse
yeah, true.
BrEnNo1023 6 months ago
oh come on sim thats everything not bad ok keep work
x3zell 1 year ago
whats this song called
CYB117 1 year ago
voodoo people- the prodigy
tomtom3232 1 year ago
That is the best looking bodykit + wheel fitment ive ever seen on 300ZX! nice work!
BJWTF 2 years ago
wut type of body kit is that?
oBlakey7 3 years ago
Did you have a problem fitting the 19" wheels on your car. I just ordered some and now I am worried that I will have to roll the fenders (19X8.5/19x10) .25 front/.40 rear. What do you think? Thanks
dreb8man 3 years ago
so you converted a 2+2 to a TT??? If so very impressive
lilgaycaliboi 3 years ago
it runs about 5-6 gs just to do that
djtechs345 2 years ago
No, it was a black factory TT out of the factory.
sim300 2 years ago
Australia always gets the nice Japanese vehicles. US TT's only came in 2 seater coupes. I guess they cbf to ship fun cars all the way to the states. Cheers on the great ride!
zi0matrlx 2 years ago
that cant be a tt out of factory its a 4 seater the only tt's japan exported to america was 2 seaters
bshep834 2 years ago
Why does everything have to be American? The car is a factory twin turbo, 2+2 from Japan that now resides in Australia!
sim300 2 years ago
OHH! okay thats cool
bshep834 2 years ago
so what was the pwoer to teh wheels?
montoyabiz 3 years ago
if u didnt see on that computer its says 343.4 hp and 256.1 kw
vietling 3 years ago
you should def do the auto to man swap. get a 99 jdm non turbo 5 sp. thats wut is in my z. im running 413 hp and 453ftlbs. i walk stock twinturbos by 5 cars. honest! mods include stillen stage 3 chip, mild cams, stillen high flow intake and cat, larger downpipe, upgraded gt500 turbos @16psi, 2hks ssqvs recirc of course, royal purple oils, stillen smics, and borla exhaust. theres a few more power adders as well. do the swap, you wont regret it
3kgtluvr 3 years ago
Very Clean Z ! Much props. But seriously, I need your help SIM300, are those OEM mudgaurds on the z? If so, please help me out to where i can purchase some. Ive been looking for those since i was 16 when i bought my z, at that was a lonnng tim eago !
Noc1nnocoN 3 years ago
I was gona ask the the same thing.........???
Nissannx2000svg 3 years ago
ebay
MarioLoco03 3 years ago
Yes they are OEM (Jap spec). Very hard to come by.
sim300 3 years ago
OMG I JUST HAD AN ORGY
djtechs345 3 years ago 3
dont you mean orgasm?
kiddmantyy 3 years ago 5
same shit
djtechs345 3 years ago
lmfao..
papaown 3 years ago
what kind of body kit is that because i have a 300zx like that and im interested in getting a body kit like that one
1BoomeR4 3 years ago
emissions standards not dynos.americas more whatever when it comes to eating up the ozone and burning us all alive. lol so we get luckey with the airflow.
nwheclipseae 3 years ago
must be stock turbo. Cause my bro has a 94 300zx stock turbo that can go about 370hp.
blitzown80 3 years ago
No not stock turbo's. I couldn't run as much boost as I would have liked, was leaning out too much.
You Americans seem to get a lot more power from the ZX. Maybe your dynos are more friendly ;)
sim300 3 years ago
Nice car. What type of rims are they? Because I just bought myself a 91 and those rims look really good.
emerica420 3 years ago
DUDE JUST GET NINJA STYLE RIMS theyre the perfect match with the z's
djtechs345 3 years ago
Those are nice rims looks good with the 300z
seamless4 4 years ago
get the pulley kit :)
CeezarPie 4 years ago
so does the 300 hp this TT have to the wheels or to the crank
wessel300 4 years ago
Its to the wheels, you have to pull the motor out of the car to get hp from the crank.
Raydizzle81xx 3 years ago
vg30dett ftw....
lespaulguy 4 years ago
tt stands for twin turbo you dumb mother fuckers
locoestboi 4 years ago 2
hahahahaa
lespaulguy 4 years ago
anybody know how much one of these cost with this exaust manifold?
cryoftheblackbirds13 4 years ago
comment below didnt reply what i wanted to. What WHP did you make? 343.4whp? whats KW? i made 356whp & 368ft. lbs torque on 93 octane. with stock turbos,stock injectors and bolt ons. you have bigger ball bearing turbos other port polished stuff. who tuned your car?
skateboardpunk36 4 years ago
The Prodigy - Voodoo People (Pendulum remix)
I wish I had this car, Saw a 300 TT on autotrader once going for $3500, but was most likely a scam. Im pretty sure later model stock 300 TTs depending on mileage and condition can go anywhere from $5000 to $10,000. Not too bad imo.
Vindicut 4 years ago
Very true. Or there could have been something seriously wrong with it, or a miss print.
xXIreallyDontCareXx 4 years ago
such a perfect z.
nice job!
guy below:
Slicktops are very rare.
I dont know how many were produced but its not alot.
MARKMARKDUDE 4 years ago
-drools- ....cannot WAIT! to get mine!!!..quick question: do all TT's come with the T-top?
terdslinger07 4 years ago
Yes, Non turbos are 2+2, slicktops, and convertibles.
SlaughterHouse2012 4 years ago
wrong on 2+2 turbo's..no TT convertibles though.
fsacoor 4 years ago
I don't understand what you're trying to say. But doesn't all TT have T-tops? And the 2+2, slicktops, and convertibles are not turbo. That's what I'm trying to say. Unless you live outside the U.S. All 2+2, slicktops, and convertibles that has turbo are conversions only, not stock. Now, do I make sense?
SlaughterHouse2012 4 years ago
sorry, didnt realise you were only refering to the states, in which case I have no idea.
fsacoor 4 years ago
300ZX are sweet how much money would one like in the video cost
gundamalex226 4 years ago
You can get them for around 5 grand, but be careful because they probably aren't in tip-top shape and would probably need an engine check-up and possibly a rebuild before you go trying to pump 400-500 horsepower out of the engine. I got mine for 10 grand.
philipp122 4 years ago
oh man what is that front bumper?!?! its stock lookin but just changed a little to know its serious...im lookin for a front bumper like that!!
Projectgt 4 years ago
It's an Ab-flug front bumper. As far as I know, can only be sourced from Japan. I have only seen a handful of them on other Z's.
sim300 4 years ago
Congrats on the very clean and sexy Z
Enjoy in the best of health!
spadgm 4 years ago 4
fucking sweet, thats pretty much the same one i'm getting expect different rims, but can anyone tell me how much HP an 300zx TT has?
xXDxCarbonx 4 years ago
well around 300 stock..
Spookyd88 4 years ago 4
Nice #'s for a 2+2 ;)
zleepertt 4 years ago
what wastgate did you use on the car? also, what song is that you used? it has an awesome backdrop beat.
sugababi1790 4 years ago
dont know who done it but its a remix of a prodigy song... i think it was call voodoo people.
MonoAoV 4 years ago
sounds nice
polloloco500 4 years ago
what type/size are those wheels?
bizenniboi 4 years ago
19" Envy, by HP Design
sim300 4 years ago
is this automatic
jacob0206 4 years ago
Currently yes... has a modified auto for drags. But when/if it blows, I'll be converting to manual.
sim300 4 years ago
one question mate, im gettin a 300 but an auto, im contemplatin going for a manual for upgrade reasons. i was wonderin if you know where about you can tune an auto up to in terms of horsepower thanks...
Spookyd88 4 years ago
Very similar to my dad's one, very nice.
behahve1 4 years ago
nice 2+2TT where did you get the work done?
toxicwaste3 4 years ago
What song is in the video? And sre those Wings West Side Skirts with shaved vents or the Stillen III?
Yomamamama 4 years ago
Song is by the Prodigy, Voodoo People (pendulum remix).
The skirts are Stillen type III.
sim300 4 years ago
is a vg30dett better or a rb26dett
punjabhe 4 years ago
vg30
red19841984 4 years ago
...what? The RB26DETT is from the Skyline GT-R.
LOLHICRONO 4 years ago
the VG can be pushed further with the stock internals.
GTS4tw 4 years ago
The rb can go upto 600hp with stock internals
punjabhe 4 years ago
Not true at all, 600hp on a stock oil pump in an RB26 will kill it quick. The VG is able to run over 500hp daily without a problem. There are also many more parts to change on an RB26 which make it more costly to get to 600hp. I have a lowly RB20det in my car though, so im not even on the same level as these beasts!
GTS4tw 4 years ago
people that want to put rb's in z's are really just retarded.. vg's are capable to plenty of power, just as an rb is.. vg's aren't exactly highly publicitized so people don't know.. it is a cool though
koji187 4 years ago
agreed, and what i think is funny is most of the ppl i talk to dont care about torque, even though an VG making the same hp as a RB will make about 200 more ftlbs.
Raydizzle81xx 3 years ago
torques the beauty of a vg.. that's how you win the races haha but no one cares they'd rather say "i have an rb"
koji187 3 years ago
Rb26, the way the inline 6 is designed.( i own a Z32TT btw.)
skateboardpunk36 4 years ago
Nice 2+2 TT!
shaggy300zx 5 years ago