Nice work. I guess you know it's not likely to fire , but watching you bar it over with your head in line with the bar makes me nervous, and that little lug sticking out of the front of the flywheel looks like it would be perfect for removing kneecaps, or am I just being a pussy. I was thinking it was going to break off its mounts and have the flywheel hit the ground in the runaway video, now that would have been a real runaway engine, Half a ton of angry cast iron chasing you around the yard.
Dear sir, me and my misses would like to rent this engine for reasons that shall remain secretive, but please include hardware for mounting to bed rails.
Projects like that take a lot of time, patients. Glad to hear it's inside, out of the weather. Do you know what museum is going to get it when you are done?
@cambriacity Still working on it. All brass parts removed and ready for sand blasting. Low priority project so it will take some time. Stored indoors at present.
@MyNameIsAwes0me Hit&Miss is only one primitive way to control the rpm and is used both on old petrol and semidiesel engines. In a diesel engine, the compression temperature is high enough to ignite the injected diesel but in a semidiesel, where the compression might be something like 4:1, the compression temperature is too low and there are a glow plug that ignites the diesel when the diesel hits the plug.
@SveinHaDD The glowplug might be electric on newer engines but on older engines it is a steel thing that have to be heated with a blow-torch prior to starting. With the engine running, the glowplug maintains sufficient heat due to combustion temperature.
@cambriacity At this time, nothing. Normally, there should be direct sea water cooling. Without cooling, this 8-9 minutes run is about max without overheating the engine.
That engine runs great. 2 stroker like the Lanz Bulldog which also could run the reverse way. Only problem is that the oil pump didn't do its job and risk of seizing the engine was a possibility.
10 litres of water in the crank case?. I figured it would at least have the essential bits covered up!. that makes things even cooler that it can run after 2 years uncovered!
that would make a nice biofuel unit for the farm pumping power back into the grid i would have it running all time veggie4life
MrPigsticker 21 hours ago
More power than a Honda civic :)
MrTpengineer 5 days ago
imagine that thing in a car lol
stratosfever 1 week ago
thats a workin son va bitch right there!
metro2089 1 week ago
Nice work. I guess you know it's not likely to fire , but watching you bar it over with your head in line with the bar makes me nervous, and that little lug sticking out of the front of the flywheel looks like it would be perfect for removing kneecaps, or am I just being a pussy. I was thinking it was going to break off its mounts and have the flywheel hit the ground in the runaway video, now that would have been a real runaway engine, Half a ton of angry cast iron chasing you around the yard.
enwri 1 week ago
Ohh, there it is, this video has the extinguisher..haha!
mythril4 2 weeks ago
What an amazing engine, I salute from Argentina (sorry for my bad english)
tincho82 3 weeks ago
thats a big ol block for 24 horse power
pauric141 3 weeks ago
Dear sir, me and my misses would like to rent this engine for reasons that shall remain secretive, but please include hardware for mounting to bed rails.
Polybun 3 weeks ago
Beautiful tickover. What did this engine come out of? Boat?
VauxhallViva1975 1 month ago in playlist Favorite videos
@VauxhallViva1975 This kind of engine was widely used for ship propulsion in more than half the last century and that goes for this one as well.
SveinHaDD 1 month ago
AMAZING!!!!
Nemodave2000 1 month ago
Projects like that take a lot of time, patients. Glad to hear it's inside, out of the weather. Do you know what museum is going to get it when you are done?
cambriacity 1 month ago
Did this engine ever get refurbished, and put inside someplace?
cambriacity 1 month ago
@cambriacity Still working on it. All brass parts removed and ready for sand blasting. Low priority project so it will take some time. Stored indoors at present.
SveinHaDD 1 month ago
its running nice now! good job! :D lolol i like how the guy at 2:55 and on is just chillin, eating a sandwich xD nice motor
jack9102 1 month ago in playlist More videos from SveinHaDD
hahhahaa thats awesome. i like how it started running better after it began spinning backwards
faded2blak 3 months ago
third attempt after changing underwear
gardnerbm 3 months ago 11
give it a little more gas shes
dtmwalkthroughs 4 months ago
Hey!! The famous runaway!
thinkpad411 4 months ago
is a semidiesel kinda like a hit/miss petrol engine?
MyNameIsAwes0me 5 months ago
@MyNameIsAwes0me Hit&Miss is only one primitive way to control the rpm and is used both on old petrol and semidiesel engines. In a diesel engine, the compression temperature is high enough to ignite the injected diesel but in a semidiesel, where the compression might be something like 4:1, the compression temperature is too low and there are a glow plug that ignites the diesel when the diesel hits the plug.
SveinHaDD 5 months ago
@SveinHaDD The glowplug might be electric on newer engines but on older engines it is a steel thing that have to be heated with a blow-torch prior to starting. With the engine running, the glowplug maintains sufficient heat due to combustion temperature.
SveinHaDD 5 months ago
@SveinHaDD so like a hot bulb engine but runs on diesel instead.
jack9102 1 month ago in playlist More videos from SveinHaDD
@jack9102 Yes,it is a hot bulb engine and it run on diesel (instead of what?)
SveinHaDD 1 month ago
Ayy, that's much better than the runway you had last time she ran. ; ) Went away after this smiling, not shaking.... Say, what is cooling her anyway?
Damian
cambriacity 7 months ago
@cambriacity At this time, nothing. Normally, there should be direct sea water cooling. Without cooling, this 8-9 minutes run is about max without overheating the engine.
SveinHaDD 5 months ago
Står ikkje denna motoren på Karmøy? Kan det hende at den havner på Havnadagane i Haugesund? Flott motor forresten =)
superiormusic 8 months ago
This is awesome! thank you SveinHaDD
oefel 8 months ago
how much toque doess she have?
pumpmaster760 8 months ago
She runs in both directions!
GREENVK 8 months ago
Definitely a ship engine, beautiful thing.
Diddleshot 8 months ago
herlig maskin!
veit du om noko sånt som er til salgs??
foreverthewho 8 months ago
Another question if you don't mind, what do you plan on doing with it now you have it running?
m0tkid 8 months ago
@m0tkid It will be refurbished and used in a private museum.
SveinHaDD 8 months ago
wonderful video, if you dont mind...what was the original purpose of that engine? it would appear to have a massive amount of torque!
rwc297 8 months ago
@rwc297 These kind of engines were widely used for ship propulsion for many decades in the last century.
SveinHaDD 8 months ago
That engine runs great. 2 stroker like the Lanz Bulldog which also could run the reverse way. Only problem is that the oil pump didn't do its job and risk of seizing the engine was a possibility.
Great video.
RODALCO2007 8 months ago
10 litres of water in the crank case?. I figured it would at least have the essential bits covered up!. that makes things even cooler that it can run after 2 years uncovered!
Aussie50 8 months ago
PUUURRRRRRRRR!!
gofixmechickenpotpie 8 months ago
Wow only 24hp, but huge and cool!
studleylee 8 months ago
Am I the only one who can watch this thing for hours? I really like this motor and I don't know why.... Thumbs up for them keeping it alive.
chromedstang07 8 months ago
boat engine?
lasergeak 8 months ago
wow, that was worth watching, thanks Ed.
thebrassmonkey100 8 months ago
@thebrassmonkey100 no worries ;)
Aussie50 8 months ago
Great stuff!, I wondered what happened to that crazy thing!. looks like it hadn't gone far since the runaway :D
Sounds wonderful now.
Aussie50 8 months ago 9