@Neoman2900 I couldnt tell the difference so no. not that i know of. but i would get it anyway, it prob added like a 5 fps difference, and has a good seal
I was waiting if you will mention to trim the tefflon tape from the bottom!
=D
If your pellets gets JAMMED in the hop-up chamber, your bucking had "bunched up" during instalation, a problem I had a few times. You have to look through your inner barrel when you push your bucking and barrel into the PDI hop-up chamber. And if it feels tight, you need to apply silicone oil to both the barrel & the bucking before placing it into the chamber. And eyeball the inside again. It IS TEDIOUIS!
@808Kameleon UGHH i know it sucked.. I used that purple one.. some how i put it back in without it bunching up.. took 30 mins, but i didnt put the rubber piece in just in case. so i got no hop up now :( But im going to but another one soon.
do the standard aeg inner barrels fit this ? or do they need different barrels ?
adamxxmolo 2 weeks ago
What trigger are you using?
I'm Using the PDI Type 96 trigger in my well l96, I have a M130 spring with my own 6061-T6 (precipitation hardened piston) and spring guide.
You are running an M170!? wow, I was afraid I was going to break my gun with a M150 spring... I think I will upgrade to the M150 then.
Olkowsr 2 months ago
@Olkowsr You can upgrade your spring m190 if you want.But you have to get better cylinder head or whole cylinder.
150Tommi 2 months ago
Does the Laylax Cylinder Head help a lot?
Neoman2900 1 year ago
@Neoman2900 I couldnt tell the difference so no. not that i know of. but i would get it anyway, it prob added like a 5 fps difference, and has a good seal
xTheMythTheLegendx 1 year ago
I was waiting if you will mention to trim the tefflon tape from the bottom!
=D
If your pellets gets JAMMED in the hop-up chamber, your bucking had "bunched up" during instalation, a problem I had a few times. You have to look through your inner barrel when you push your bucking and barrel into the PDI hop-up chamber. And if it feels tight, you need to apply silicone oil to both the barrel & the bucking before placing it into the chamber. And eyeball the inside again. It IS TEDIOUIS!
808Kameleon 1 year ago
@808Kameleon UGHH i know it sucked.. I used that purple one.. some how i put it back in without it bunching up.. took 30 mins, but i didnt put the rubber piece in just in case. so i got no hop up now :( But im going to but another one soon.
xTheMythTheLegendx 1 year ago
@xTheMythTheLegendx I have a video on how to look for the bucking bunching up. It was my latest.
808Kameleon 1 year ago