Im a die hard American Muscle fan, i have a 72 Mustang. But i also have an 08 tacoma.. I respect the shit out of this taco! 2jz motor is no joke, wish i had the motor in mine.
That is a great engine but how difficult was it to fit into the small engine bay. I had an '89 with the 22R and there was not a whole lot of room to spare. I cannot imagine an inline 6.
@allenpinhead where the hell did you get rotary power from? the title says 2jz plus rotarys suck and break down all the time ask anyone who drives an rx7
I've should of known. I told him the day of this race that he needed to adjust his rev limiter. If he would of got rid of that nasty hold on his fuel line and put that motegi exhaust system on, he would of been running 7's.
@MOLRobocop Try an F20C ;) 724whp on stock everything but the turbo kit itself. Only thing wrong was headgasket was going out at dyno day. W/ internals and a few things for reliability its a machine built for racin' son! ;)
I use a turbo 400 trans and ford 9in rearend. I used the toyota rearend with a TRD limited slip for a long time. Ran a 9.79 with that set up. Finally broke an axle at a really sticky track.
i have the same truck 89 single cab currently with a 22re i was thinking of lc engineering it with building it up but the jz has crossed my mind a alot of times along with a twin turbo 350 but id like to keep it yota any advice?
Totally awesome! mind if I ask what is the rest of the drivetrain? what kind of tranny and rear end did you put in? Man, it just jumps off the line. Major props!
I'm sticking with a 22r. I am goin to try to get 300hp N/A, just trying to cut all the weight i can to get good numbers. Is your truck still all steel or fiberglass?
22r ran great. Lightened crank, pauter rods, JE pistons... It was turboed with a T3/T4 put out around 400hp ran low 12's. I always had a problem with the trans shifting, it would hang in gear until the rev's came down enough.
i got ya. i am fully fiberglassing the truck. hood, fenders, i tossed the bed and am goin to make a box tube frame and hang fiberglass sides on it. dash was ripped out and i am goin to put an aluminum one back in it. and have a ladder bar rear suspension with coil-overs, locker and lowering my ring and pinion to a 456. i hope cutting all that weight will make me fast. what kind of suspension are you running?
i've been doin some thinking about that bottom end. how much horsepower do you think it can handle? is there anything wrong with it? and how much would you want for it
All you can hear of that Toyota is the turbo spooling.
jonthamo 4 weeks ago
what track ?
b20mr2 1 month ago
i love JDM buttttttt .. the thing is that .. The Muscle is N/A and the 2jz have a turbo bigger then your head.
DubTrinity 2 months ago
@DubTrinity And that muscle shit also has 2 extra cylinders
homgrownbud 4 days ago
bad ass
soldierttown 3 months ago
ไอสัสเจ๋งจิง เจอกปากเมืองไทย มนตรีดีเซลไอเยสแม่
niceza1125 4 months ago
do you guys still own the truck?
kritical85 4 months ago
lol that bb got fucked up
1NeedsAudio 5 months ago
ชอบ
Koses2009 5 months ago
Turbo Huh? Try Guams S10
SinCityBoys11 6 months ago
Im a die hard American Muscle fan, i have a 72 Mustang. But i also have an 08 tacoma.. I respect the shit out of this taco! 2jz motor is no joke, wish i had the motor in mine.
ecdubdude 7 months ago
@pbb01 no sounded like a smallblock 350 ain't lyn
ballistik209 7 months ago
That is a great engine but how difficult was it to fit into the small engine bay. I had an '89 with the 22R and there was not a whole lot of room to spare. I cannot imagine an inline 6.
dapsapsrp 7 months ago
holy shit!torque on dat baby made me wanna hump,lol!great race
taboch 8 months ago
nice yota
dedika8 9 months ago
wooww! this is not 22R toyota :S
pirrongo1 9 months ago
hey toyota wzup? FFFFFFRUm. -.-
Stabiloten 11 months ago
Wow!
theguyyah 1 year ago
What model is this truck? and how much would a 2jz swap cost + supporting parts
XxUnknownxX8 1 year ago
I didnt hear no 2jz!
psychotikpaisano 1 year ago
@psychotikpaisano
Yes it's hard to hear a muffled 2j over a blown big block...
bdrturbo 1 year ago 12
LMAO@ rotary power.. where the fuck did that come from?
j0shuadr3w 1 year ago 4
How much hp u running ? I have the same tuck
2fastg35 1 year ago
respect to your pick up ! good job..
QuebecQuebec18 1 year ago
Cant even hear the 2jz over that big ass V-8 in the far lane!!
bliglum 1 year ago
Turbo spool makes me horny. =)
Sick run man.
MTturbotoy 1 year ago
2jz huh. shit. you figure 275hrs in a truck that weighs nothing....straight MOPPIN ppl on the track! ima soon do this to my 86yota. LOVE TOYOTAS!
thatan1 1 year ago
did that bitch ass chevy just get beat by at truck?!
bluejayguy26able 1 year ago
twin turbo set up? or single big turbo?
oaeproductions 1 year ago
This comment has received too many negative votes show
rotary power :)
allenpinhead 1 year ago
@allenpinhead Nope... It's a Straight 6cyl
bdrturbo 1 year ago 15
@allenpinhead where the hell did you get rotary power from? the title says 2jz plus rotarys suck and break down all the time ask anyone who drives an rx7
karsseboomh22 1 year ago
@allenpinhead haha what a dumb dick
TylorGrizzStraight 1 year ago
@TylorGrizzStraight
shutup blad go get laid emo fag.
allenpinhead 1 year ago
@allenpinhead yea my friend that is a twin turbo 2jz from a toyota supra if i am correct
giggidy2692 1 year ago
@allenpinhead its a 2jz
MrButterneo 1 year ago
@allenpinhead you fail lol rotary power what do you think your watching
Saabatron 10 months ago 2
LOL you cant even hear the 2j next to that loud ass v8.
bliglum 1 year ago
I (heart) this truck!
turbosuperiority 1 year ago
I've should of known. I told him the day of this race that he needed to adjust his rev limiter. If he would of got rid of that nasty hold on his fuel line and put that motegi exhaust system on, he would of been running 7's.
Sencon10 1 year ago
I'm not in love w/ Supra engines, but the surprise factor here is awesome. Good job.
MOLRobocop 1 year ago
@MOLRobocop Try an F20C ;) 724whp on stock everything but the turbo kit itself. Only thing wrong was headgasket was going out at dyno day. W/ internals and a few things for reliability its a machine built for racin' son! ;)
XxxXVick 1 year ago
no 4 banger? dam :/
that thing sounds like V8, cool.
SRT10RAMLVR 1 year ago
nice... LOL!!!! i love old chevy's too, but i bet that camaro (?) next to you was pissed!
prdgyair 1 year ago
im doing a 1jz swap on my hilux...... i wud like it if u cud give me some pointers!!!!
blackapole 1 year ago
Comment removed
671papi 1 year ago
Read the description and guess again. It has a 2jz motor which is from a toyota supra which is a japanese car.
91civiclx 1 year ago
Man, that thing is HOT! A rocket!
I'm assuming that the engine is a gasoline motor? I don't know too much about toyotas.
nickelisio 1 year ago
nice truck very nice
gilmar303 2 years ago
bahah did that MUSCLE just get beat by a 2JZ?
imports all the way!!!
..JDM,,,
300zx93nismo1 2 years ago 31
@300zx93nismo1
He's running a GM Turbo 400 tranny and a ford 9" rear...what's that say?
Awesome none the less.
TweakedReality 1 year ago
@300zx93nismo1 supra engine?
pcbb01 9 months ago
hahahaahhaha
sykoSpanKy 2 years ago
nicely done, it really flies!!
nevrnuftorq 2 years ago
wazzup men!!!
great truck!
how did you make it launch the way it is?
i have a 1jzgte truck as well but im having problems on its traction...
illusionz6 2 years ago
it's all about the weight transfer. the biggest help was getting the front shocks to extend quickly and giving a little more travel
bdrturbo 2 years ago
ohh i see,,,
by the way, what tranny and rear differentials are you using?
i'm worried i'll break my transmission or differentials because of too much traction
illusionz6 2 years ago
I use a turbo 400 trans and ford 9in rearend. I used the toyota rearend with a TRD limited slip for a long time. Ran a 9.79 with that set up. Finally broke an axle at a really sticky track.
bdrturbo 2 years ago
thats max 10ggs
bammab12 2 years ago
Damn right...
holyjesuswashere 2 years ago 7
JDM 4 LIFE
SHADOWS113 2 years ago
hahahahaha!!! And to think, that Camaro couldn't even haul half a yard of fill dirt! :)
hotrodsurplus 2 years ago
9:40 -thats not the fastest !
Check out the blue South African bakkie of Louis Lima, think its best time was 8:60
Check out "fastast 1400 bakkie" on youtube
BiltongBaz 3 years ago
wholly moley
noeltheshemale 3 years ago
This has been flagged as spam show
My ex gf cheated on me and i found out so haha i posted all of her adult vids on this profile! b
WHOAHHgangsahH 3 years ago
O_o You're right! lol Doesnt even look like a girl.. XD 5
anoop420 3 years ago
This is in sacramento? i race there all the time sweet truck
HOWARDSRACING 3 years ago
hell ya to the classic mini yoters but sounds like someone dropped a classic pontiac in the hood but we will pretend they didnt
manofmusicx 3 years ago
what are you talking about?
blabblah69 3 years ago
thats the POS next to it..
wil8115 3 years ago
straight six supra engine all the way..no v8 in this beast
blabblah69 3 years ago
yes i know. before you comment, you should read the comment i was replying to. ;-)
wil8115 3 years ago
that turbo sounds nicceeeeee
speeddemon38 3 years ago
i have the same truck 89 single cab currently with a 22re i was thinking of lc engineering it with building it up but the jz has crossed my mind a alot of times along with a twin turbo 350 but id like to keep it yota any advice?
Thanks Brock
Bdgmcustoms07 3 years ago
lc engineering 22re- $5k plus turbo kit $3k
or
stock jz engine install $5-8k..comes turbo..known to handle 700+rwhp stock internals.
blabblah69 3 years ago
Thanks for the info about the website!
smibru 3 years ago
Im gonna drop a 383 in the yota, richmond tranny and ford 9" rear end
gandb21 3 years ago
Sorry you dont have fastest anymore Dave does 7m power. Check out joliroger4. Unless you have better times now.
supratruck74 3 years ago
Little faster ... but street legal? Will it pass smog? I'm pretty sure bdturbo's truck will be faster this year ...
jcline3 3 years ago
you are wrong, his is not a street legal. def. a bad ass truck though!
blabblah69 3 years ago
this was in response to supratruck74
blabblah69 3 years ago
Is that a Toyota engine???
Thanks.
Heino0 3 years ago
yes, from the popular toyota supra
Hawkman440x 3 years ago
thats doin toyota proud
willpumpforcone 3 years ago
bad ass does it fit in easy?
mfuji0001 3 years ago
it was a tight fit. I have about an inch to spare between the front pully and the radiator.
bdrturbo 3 years ago
dude all i have to say is wow!awsome job!you just inspired me to build my own!!
teamixr 3 years ago
Nice truck man!! Who's your video man? He did a really good job! Hehehe! Get that thing ready so we can see you out there this year!!
jcline3 4 years ago
what differential do you have
PrziLL3st 4 years ago
real nice toyota,I have an 88 model ,and a dodge 90 drag truck
dexterr88 4 years ago
This comment has received too many negative votes show
haha , ya its fast because it doenst have a toyota motor
mx38mx 4 years ago
fast cuz it is a Toyota 2JZ motor!!!
bdrturbo 4 years ago
owned!
popwarhomie 4 years ago
2jz dosent say alot to me =)
solveg18 4 years ago
This comment has received too many negative votes show
idiot
hachiroku781 4 years ago
where is the engine for that bad boy
crazyBLZ 4 years ago
in the front
bdrturbo 4 years ago
And to think, its 7M-powered sister is only 1/4 seconds slower.
MidnightDorifuta 4 years ago
Hey, that turboed 22r you were running what kind of tranny did you have behind it?
jamesonhntr 4 years ago
it was a stock 5 speed.
bdrturbo 4 years ago
you have any work done to it?
jamesonhntr 4 years ago
no, but it didn't shift too well once I started making power. That's why I started the 2J swap.
bdrturbo 4 years ago
its good to know it can hold the power. you still got that 22r bottom end?
jamesonhntr 4 years ago
glad to see another drag vid on your truck man :)
MKIIIsupra2jz 4 years ago
Totally awesome! mind if I ask what is the rest of the drivetrain? what kind of tranny and rear end did you put in? Man, it just jumps off the line. Major props!
bugturbo67 4 years ago
I'm running a TH400 trans and a Ford 9in in the rear.
bdrturbo 4 years ago
a GM th400? bolts up to the 2jz?
Hawkman440x 3 years ago
there's an adapter to mate the two from Boostlogic
bdrturbo 3 years ago
that's badass. ive heard of guys running th400's i just never knew how exactly they did so. thanks
Hawkman440x 3 years ago
nice truck. i am builing my 87 yota now. what do you got done to that thing
jamesonhntr 4 years ago
More than I could probably list and I've spent more money than I want to know...
bdrturbo 4 years ago
I'm sticking with a 22r. I am goin to try to get 300hp N/A, just trying to cut all the weight i can to get good numbers. Is your truck still all steel or fiberglass?
jamesonhntr 4 years ago
its all steel weighs in around 2850. I still have fully built 22r bottom end and a bunch of other parts if your interested
bdrturbo 4 years ago
you ever run the truck with the 22r? and just how built is it?
jamesonhntr 4 years ago
22r ran great. Lightened crank, pauter rods, JE pistons... It was turboed with a T3/T4 put out around 400hp ran low 12's. I always had a problem with the trans shifting, it would hang in gear until the rev's came down enough.
bdrturbo 4 years ago
i got ya. i am fully fiberglassing the truck. hood, fenders, i tossed the bed and am goin to make a box tube frame and hang fiberglass sides on it. dash was ripped out and i am goin to put an aluminum one back in it. and have a ladder bar rear suspension with coil-overs, locker and lowering my ring and pinion to a 456. i hope cutting all that weight will make me fast. what kind of suspension are you running?
jamesonhntr 4 years ago
i've been doin some thinking about that bottom end. how much horsepower do you think it can handle? is there anything wrong with it? and how much would you want for it
jamesonhntr 4 years ago
do u have yahoo? please email me. send me your emai on here. let's chat
700whpfocus 4 years ago
Its BDRTURBO@Yahoo
bdrturbo 4 years ago
DAMN...why not use a S-10? I AM LONO!
RhettaDaddy 4 years ago
cause I had a toyota
bdrturbo 4 years ago
that's fuckin carazy!
RestlessX3 4 years ago
oh good lord that was sweet. under hood pics please!
BrokenEstrings 4 years ago
Hey nice job. I would like to see more and under the hood please.
dfxtreme 4 years ago
oohh shit dis truck is sick...how long did it take to finish dat project
Slowyota65 5 years ago