@TDUxam It all depends on what type of fight you want, speed, longer flights or just both. Best bet is to try to find the sweet spot thats best for you.
@TDUxam 10x5, 10x7, 11x5.5, 11x7. I have used these in the past with stock and modded setups. Just get a hand full at your hobby shop and test them your self. RC groups and other site like it may help even more.
Some nice speed there. Out of all my planes the T28 is my favourite (inc a 160km/hr edf) I've had my modded T28 running for 2.5yrs running a hacker a30 10xl (900kv), turnigy 60amp esc, 4s 2650 30c, Aeronaut carbon 10 x 8 prop. Has awesome performance. I found the aeronaut prop outperformed all other props i tried
Some nice speed there. Out of all my planes the T28 is my favourite (inc a 160km/hr edf) I've had my modded T28 running for 2.5yrs running a hacker a30 10xl (900kv), turnigy 60amp esc, 4s 2650 30c, Aeronaut carbon 10 x 8 prop. Has awesome performance. I found the aeronaut prop outperformed all other props i tried
@olieolie63 Turnigy motors are not up to the specs of what they state. I've seen and heard over the years that one person has the same motor and has higher or lower amp draws.
Tr 35-36c or Tr 35-30c with stock or 10X5 apc. You will have to match it up with what you like flying wise. The C models have around 1100kv the B model has a higher 1300kv. The lower your kv the longer your flight times will be. I use a Bp 2814-8 with a 11X5.5 Apc prop. I get good flight times and speed also. Carter still runs this same setup in this video.
Just like mine!
JefTekGrowCam 1 year ago
What is the best air screw for the standart ESC? APC 10 x 5 ?
TDUxam 1 year ago
@TDUxam It all depends on what type of fight you want, speed, longer flights or just both. Best bet is to try to find the sweet spot thats best for you.
AntonioSpeed 1 year ago
@AntonioSpeed
I want a mix of both ;)
TDUxam 1 year ago
@AntonioSpeed I want a mix of all. What do you think is the best prop? Thanks!
TDUxam 1 year ago
@TDUxam 10x5, 10x7, 11x5.5, 11x7. I have used these in the past with stock and modded setups. Just get a hand full at your hobby shop and test them your self. RC groups and other site like it may help even more.
AntonioSpeed 1 year ago
@AntonioSpeed Thanks, I'll try 10x5
TDUxam 1 year ago
@AntonioSpeed WOW! This Motor is great! Fly it with a APCe 9x4,5, it's a rocket. Unlimited vertical!
TDUxam 1 year ago
Some nice speed there. Out of all my planes the T28 is my favourite (inc a 160km/hr edf) I've had my modded T28 running for 2.5yrs running a hacker a30 10xl (900kv), turnigy 60amp esc, 4s 2650 30c, Aeronaut carbon 10 x 8 prop. Has awesome performance. I found the aeronaut prop outperformed all other props i tried
mikeaust80 1 year ago
Some nice speed there. Out of all my planes the T28 is my favourite (inc a 160km/hr edf) I've had my modded T28 running for 2.5yrs running a hacker a30 10xl (900kv), turnigy 60amp esc, 4s 2650 30c, Aeronaut carbon 10 x 8 prop. Has awesome performance. I found the aeronaut prop outperformed all other props i tried
mikeaust80 1 year ago
I have same set-up but running a 60 amp esc - still not pulling near 48 amps.
It flys great though why do you think its not a good combo. ?
olieolie63 2 years ago
@olieolie63 Turnigy motors are not up to the specs of what they state. I've seen and heard over the years that one person has the same motor and has higher or lower amp draws.
AntonioSpeed 2 years ago
Tr 35-36c or Tr 35-30c with stock or 10X5 apc. You will have to match it up with what you like flying wise. The C models have around 1100kv the B model has a higher 1300kv. The lower your kv the longer your flight times will be. I use a Bp 2814-8 with a 11X5.5 Apc prop. I get good flight times and speed also. Carter still runs this same setup in this video.
AntonioSpeed 2 years ago
sweet'izl
yamasubaruger 3 years ago