can someone help me i got a baja 5t and when start it on neutral the wheels start spinning and yeah its like me accelerating but im not even pressing the button its on neutral and doing that i heard that its the clutch its locked up is that right?
U fried the fuck out of the bearings in the motor like I did for making my 5b hover heat don't drive it more than a full tank give it a 20 min to cool down then u won't have the same thing happen again
Ok. Just to let you no, I'm not an expert, but i do have the same make and model as yours. King motors baja 5B. What may be causing the problem is either within the diff, or within the clutch. The diff is located behind the motor, it's a black object that has a rod coming out of it, through the brakes and into the spur gear. You may need to take the dif apart. Inside you will find a whole bunch of gears. something could be wrond there. I'm not sure what is behind the clutch, i hope this helps.
@1091jordan Also i started my one up the other day, it started perfect, everything moves perfect. If you not sure what the spur gear is, its the big gear besid the little gear. the little gear is called a pinion gear. It's attatched the the clutch. But remember, it's King Motors. They a cheap asian clone of the HPI. But all HPI parts are compatible with it.
I had the same problem, mine was running also for a few seconds. The problem was the needle inside the carb, check on ebay for walbro repair kit and replace the needle, then turn your L and H back to factory settings
take in back to your local hobby store and get a refund also did you run in the engine if you did not run it in or used it to hard at the start then you are going to have to get a new clutch system. Or grass might have got in the
engine. did you get it shipped i cant help you if you did
hi there i had the same problem but mine was hpi baja. i upgraded it to a vertigo clutch bell with hexagon lock with a nut instead of a little bolt. also they are self tightening. get u self a manual if u aint got 1 cos its not to hard to do yourself save yourself sum money. mmr large scale and ofcourse ebay is a good place to look (good luck) :)
look the up left bolt on motor, untite and stuck the brake puds.next check the rear triple discbrakes, next check the gears in diff. ALL BAJAS have some problems.
I had the same problem with my Kingmotor Baja. My head bolts got loose, and the gasget for the head was broke. had to get a new one and all is well. if it starts and than 2 or 3 secs later stalls.... that means its sucking air. remove the plastic piece from on top of the head, than remove the 2 bolts and the pull start and remove the head, replace the gasget and re assemble.
@MrPoppyjo i got the car working, i needed a new clutch , it was 250 to repair this at a shop and now my car wont start so i have no idea whats wrong with it this time, i tried and tried and gave up and a the other day , after a few weeks of trying to start it, it turned on but it only lasted 2 or 3 seconds and turned back of? do you no wat that could be? i dont no why i bought a king motor car :/
@rcsandthings well that sucks you dont know what your doing def dont keep reving it like that cuz its not running. if you cant roll it with you hand then its the tranny or locked up spur to pinnion (too close) to each other and if you cant run it when you turn on the electronics your brakes are set up way to tight lol. or its your clutch again i geuss its not hard to fix just look up how to. $250 is fucking bs to pay for a clutch replace that takes like 5 secs
@rcsandthings i know why its not starting dont listen to these ppl they are good bajas but i hav a 5t from hpi it happened to me its just your spark plug replace that and it should start
@MrPoppyjo like you annoy me, are you upset that people are getting the same thing you bought but at a much cheaper price? I bought a KM and haven't had a problem with it, i checked over the whole vehicle and the only thing that was wrong with it was a missing bearing in the steering wiper arm, cheap fix. And before you start i check over all new models and have found irregularities in both genuine HPI and Traxxas vehicles as well. If you know what you're doing they are just as good.
@MrPoppyjo Why you gotta be a hater? He saw a deal on the clone car and bought it. I have the KM KSRC-001 and love it, 2 gallons into it and the only problem was a bum spur gear holder, $8 HPI replacement and no big deal.
I did replace the servos from the start simply because I prefer Hitec over no name servos.
español : amigo yo tube el mismo problema . tienes que canbiar el enbreague y el tornillo del piñon a y otra cosa cuando ayas canbiado el embreague aprieta bien fuerte los tornillos que lo sujetan as lo mismo con el tornillo del piñon
Spanish: friend I tube the same problem. embreague have to Canberra and the pinion screw there is another thing when the embreague ayas Canberra press really hard the screws that hold it as the same with the pinion screw
Hey check the bolt that holds the pinion gear to the clutch bell. Its probably broke, its a common problem. U should look into getting a Turtle Racing clutch system.
@fxgrnd38 thanks, ok im used to nitro rc cars because i had many of them but on here im not really familiar because this is my first 2 stroke rc car. where is the bolt the holds the pinion gear? also were is the pinion gear? and where is the clutch bell. im guessing its by the two gears i see?
@fxgrnd38 its the little gear you see there the clutch bell is directly behind that. see if you can remove that bolt you will need to lock the gears down so they want rotate. Also check the clutch spring,dogbone pins,the pins that hold on the rear hubs,check the hex on the back side of your wheels,also check the drive axles where the dogbones If its none of these then its in the transmission.
@fxgrnd38 well i hit into a wall and when i got up the wall then it stopped working, i dont know if that changes any of the reasons why its not working. could it still be the trans from hitting a wall
can someone help me i got a baja 5t and when start it on neutral the wheels start spinning and yeah its like me accelerating but im not even pressing the button its on neutral and doing that i heard that its the clutch its locked up is that right?
blackfire123454 1 week ago
U fried the fuck out of the bearings in the motor like I did for making my 5b hover heat don't drive it more than a full tank give it a 20 min to cool down then u won't have the same thing happen again
Player21051 2 weeks ago
looks like its a diff prob i too bought a shitty clone the money ive spent on it putting it right i could of bought 2 hpi baja LOL
deffo lesson learnt! you get what ya pay for.....
rcbasha 3 weeks ago
Ok. Just to let you no, I'm not an expert, but i do have the same make and model as yours. King motors baja 5B. What may be causing the problem is either within the diff, or within the clutch. The diff is located behind the motor, it's a black object that has a rod coming out of it, through the brakes and into the spur gear. You may need to take the dif apart. Inside you will find a whole bunch of gears. something could be wrond there. I'm not sure what is behind the clutch, i hope this helps.
1091jordan 2 months ago
@1091jordan Also i started my one up the other day, it started perfect, everything moves perfect. If you not sure what the spur gear is, its the big gear besid the little gear. the little gear is called a pinion gear. It's attatched the the clutch. But remember, it's King Motors. They a cheap asian clone of the HPI. But all HPI parts are compatible with it.
1091jordan 2 months ago
$250 ! man i get clone clutches for $18.00bucks each,
cant knock the clones they are just so cheap for parts..
and btw check the coil has not come loose after the crash
and is causeing problems
BajaParts 4 months ago
I had the same problem, mine was running also for a few seconds. The problem was the needle inside the carb, check on ebay for walbro repair kit and replace the needle, then turn your L and H back to factory settings
tim03031979 5 months ago
you shod not own a baja if you cant fix 1bahahaha
MsBaja10 5 months ago
mine will not start and it is brand new any help please
24shader 7 months ago
@24shader
take in back to your local hobby store and get a refund also did you run in the engine if you did not run it in or used it to hard at the start then you are going to have to get a new clutch system. Or grass might have got in the
engine. did you get it shipped i cant help you if you did
RCCARTV100 6 months ago
Kupplung kaputt ??
SashHD 7 months ago
ITS THE SCREWS BEHINED THE BIG GEAR IF YOU HAVEN'T FIXED IT YET MY BROTHERS ON DID THE SAME THING.PROBLEM SOLVED DO I GET A METAL
rx77xr 7 months ago
clutch problem...
exoticg9 9 months ago
hi there i had the same problem but mine was hpi baja. i upgraded it to a vertigo clutch bell with hexagon lock with a nut instead of a little bolt. also they are self tightening. get u self a manual if u aint got 1 cos its not to hard to do yourself save yourself sum money. mmr large scale and ofcourse ebay is a good place to look (good luck) :)
corsavvr 9 months ago
look the up left bolt on motor, untite and stuck the brake puds.next check the rear triple discbrakes, next check the gears in diff. ALL BAJAS have some problems.
GASWARFLY 10 months ago
there is a major problem with it. it is a KING MOTORS
so it is junk get a decent hpi baja 5b 2.0 mate;)
viss3n 11 months ago
I had the same problem with my Kingmotor Baja. My head bolts got loose, and the gasget for the head was broke. had to get a new one and all is well. if it starts and than 2 or 3 secs later stalls.... that means its sucking air. remove the plastic piece from on top of the head, than remove the 2 bolts and the pull start and remove the head, replace the gasget and re assemble.
gemster18 1 year ago
There all wrong the problem is that its not a Hpi baja its junk did your motor go yet
MrPoppyjo 1 year ago
@MrPoppyjo i got the car working, i needed a new clutch , it was 250 to repair this at a shop and now my car wont start so i have no idea whats wrong with it this time, i tried and tried and gave up and a the other day , after a few weeks of trying to start it, it turned on but it only lasted 2 or 3 seconds and turned back of? do you no wat that could be? i dont no why i bought a king motor car :/
rcsandthings 1 year ago
@rcsandthings $250 to replace a clutch?!?! you got ripped...
kbent88 1 year ago
@rcsandthings You need 2 change ur spark plug. ;)
holmen240 11 months ago
@rcsandthings well that sucks you dont know what your doing def dont keep reving it like that cuz its not running. if you cant roll it with you hand then its the tranny or locked up spur to pinnion (too close) to each other and if you cant run it when you turn on the electronics your brakes are set up way to tight lol. or its your clutch again i geuss its not hard to fix just look up how to. $250 is fucking bs to pay for a clutch replace that takes like 5 secs
staticxmako 11 months ago
@rcsandthings nothing wrong with a king motor car you just need to take care of it better
A11DAyEV3RYDAY 8 months ago
@rcsandthings i know why its not starting dont listen to these ppl they are good bajas but i hav a 5t from hpi it happened to me its just your spark plug replace that and it should start
rccarsman87 7 months ago
@rcsandthings sounds like tuning problem or a stone is traped were the hex nut is, i had it happen to me before lol
dudeweresmycarlol 5 months ago
Comment removed
P1630N 1 year ago
@MrPoppyjo like you annoy me, are you upset that people are getting the same thing you bought but at a much cheaper price? I bought a KM and haven't had a problem with it, i checked over the whole vehicle and the only thing that was wrong with it was a missing bearing in the steering wiper arm, cheap fix. And before you start i check over all new models and have found irregularities in both genuine HPI and Traxxas vehicles as well. If you know what you're doing they are just as good.
P1630N 1 year ago
@MrPoppyjo Why you gotta be a hater? He saw a deal on the clone car and bought it. I have the KM KSRC-001 and love it, 2 gallons into it and the only problem was a bum spur gear holder, $8 HPI replacement and no big deal.
I did replace the servos from the start simply because I prefer Hitec over no name servos.
NitrousMouse 4 months ago
This has been flagged as spam show
this was clutch problewm... replace new one and problem solve
yiela97 1 year ago
this was clutch problewm... replace new one and problem solve
yiela97 1 year ago
Mr. Parkinson...
ThunderTigerRider 1 year ago
i reckon take the big gear off for further ideas like then u will know if its the clutch or the gear box thats it mate u will have your answer
rx77xr 1 year ago
check the brake and the clutch.. don't worry just only small problem haha ~
vios8820 1 year ago
i would check the brakes i had the same problem with mine and it turned out to be the brake screw worked itself in and locked it up.
iamsrt4 1 year ago
español : amigo yo tube el mismo problema . tienes que canbiar el enbreague y el tornillo del piñon a y otra cosa cuando ayas canbiado el embreague aprieta bien fuerte los tornillos que lo sujetan as lo mismo con el tornillo del piñon
markorojas18 1 year ago
Spanish: friend I tube the same problem. embreague have to Canberra and the pinion screw there is another thing when the embreague ayas Canberra press really hard the screws that hold it as the same with the pinion screw
markorojas18 1 year ago
Hey check the bolt that holds the pinion gear to the clutch bell. Its probably broke, its a common problem. U should look into getting a Turtle Racing clutch system.
fxgrnd38 1 year ago
@fxgrnd38 thanks, ok im used to nitro rc cars because i had many of them but on here im not really familiar because this is my first 2 stroke rc car. where is the bolt the holds the pinion gear? also were is the pinion gear? and where is the clutch bell. im guessing its by the two gears i see?
rcsandthings 1 year ago
@fxgrnd38 its the little gear you see there the clutch bell is directly behind that. see if you can remove that bolt you will need to lock the gears down so they want rotate. Also check the clutch spring,dogbone pins,the pins that hold on the rear hubs,check the hex on the back side of your wheels,also check the drive axles where the dogbones If its none of these then its in the transmission.
fxgrnd38 1 year ago
@fxgrnd38 Hey, Google (team fast eddy tutorials) and look around there.
fxgrnd38 1 year ago
@fxgrnd38 well i hit into a wall and when i got up the wall then it stopped working, i dont know if that changes any of the reasons why its not working. could it still be the trans from hitting a wall
rcsandthings 1 year ago
@rcsandthings Yes it could be in the trans, you will need to tear into it until you find the problem. its not hard just takes time. good luck.
fxgrnd38 1 year ago