i have one of it and i set up a 145 spring on it, an m93 JG motor a Stu CA gears and a 20c battery. Whoa, it has a 480fps on a .25bbs in a pistol length m4 cqb!
i have the same gun awsome doesnt really jam but when it does u can use the plunger to unjam it it works all the time awsome 5\5 i would recomend it to everyone
dude this gun kicks @ss if you put a Li-Poly battery and a Systema Magnum Motor on it. If you do that the rate of fire will be 40 bb per second. It will cost about 140$
I just have one more question. I looked on Airsoft GI and it said to get the 9.6v 2000mah nunchuck battery from Intellect. I know which battery to get, but I am not sure which charger to get. Can you tell me what charger you need for it? Thanks!
I heard this gun is heavy on the front and light on the back, is that true? Also can you please tell me about how many inches long this gun is? Thanks!
Yea this will be my first AEG if I get this gun. I am looking for something solid and compact for CQB and for playing in the woods. Is the range good on this gun for being a smaller M4?
i'm saving up for the ICS M4 but gonna take awile to come up with $300 plus battey and charger and shipping and accessories but when i get it it will be worth it (it better i plan on putting over $500 into it)
Well, its supposed to be fore CQB, try to keep it as light weight with minimal necessary accessories only. I have a vertical foregrip, rail covers and a VN mag for lighter weight and balance
Yea i have the same things as you i just need a vn mag if you want i can send you a picture of it and you could give me some tips and what i should buy for it.
realy tahts metal last one i saw like that was plastic it kinda sounds like the one in your video is plastic but yeah different companys make different guns or the same gun in different ways
sure, the only con i can think of is the wobbly selector switch out of the box (now its now problem after some use) and the squeaky noise cause of the split GB but other than that, ICS is the way to go.
yes, unless you rewire the plugs to the back, assuming you have a crane stock or a stock with a batter bag, other than that, the area inside the rails are way too small.there is one more way, you can buy a ICS ready mag, and a hollow shell store the battery, but the long wires will look funny
T_T so its smaller than a marui sig battery space cause id like to buy one but i only have 8.4v mini batteries.Are you sure cuz i have some large 8.4v in my marui sig ppl say it cant be done but i did a lil modding and well ya lol its in forgrip still rather than like in a peq box
You can try and chip some pieces off the inside but i wouldnt recommend that. Im pretty sure, i tried to put it in, and it wouldnt go in, its just designed for the nun-chuck battery
Hey so just checking agian Nunchuck 9.6 battery? I'm going to get one in the near future but didn't know what kind of battery to get bc the sites either said costum or nothing at all. Thanks for the help
do king arms mid caps fit in this well? and do they feed good? anyone respond!
sammaxwell12 8 months ago
go to redwolfairsoft com and search for a stubby launcher and just keep lucking there is one there I know I've seen it.
0110Mikey 1 year ago
Thank u SSSSOOOOO much for the video
Jessejames1011 1 year ago
nice acqb videos. do you play at TAA too? and about how rounds per second does this shoot stock with that 9.6?
RVMDairsoft 1 year ago
is it accurate?
will122391 1 year ago
i have one of it and i set up a 145 spring on it, an m93 JG motor a Stu CA gears and a 20c battery. Whoa, it has a 480fps on a .25bbs in a pistol length m4 cqb!
explorerT4000 2 years ago
were did u get urs i got mine from albuquerque airsoft
and i have a systema motor in it frekin hits hard
taydfreese 2 years ago
wait, does john sell these there?
JacknifedJuggernaut 2 years ago
i have the same gun awsome doesnt really jam but when it does u can use the plunger to unjam it it works all the time awsome 5\5 i would recomend it to everyone
motopyro 3 years ago
what kind of battery for this gun like what voltage and mah and like nunchuck, reuglar or stick?
jeff4sox 3 years ago
9.6v 2000mah nunchuck
airsoft111 3 years ago
dude this gun kicks @ss if you put a Li-Poly battery and a Systema Magnum Motor on it. If you do that the rate of fire will be 40 bb per second. It will cost about 140$
Airsoftnerd84 3 years ago
if you have handeled this one in real life its pretty nice the paint is clean and its all solid
SolidSnacks92 3 years ago
not the prettiest thing in the world but i might go for it.
sweetdisjustice 3 years ago
What is the name of that reflex site and where did you get it and for how much?
MP7ASB 3 years ago
The Panorama 4 reticule site off of evike . com
airsoft111 3 years ago
hey what brand were the other mags???
airsoftwarrior1 3 years ago
by MAG, and the VN version is by G&P
airsoft111 3 years ago
freakin ugly man
shinoda2LP 3 years ago
super
airsoft111 3 years ago
I just have one more question. I looked on Airsoft GI and it said to get the 9.6v 2000mah nunchuck battery from Intellect. I know which battery to get, but I am not sure which charger to get. Can you tell me what charger you need for it? Thanks!
JRizzo10 3 years ago
i have a smart charger
airsoft111 3 years ago
hey i just got the gun the 26 u get the wall charger that can charge a 9.6 volt it will say like 8.somthing to 9.6 volt thats it its 10 bucks dude
airsoftwarrior1 3 years ago
I heard this gun is heavy on the front and light on the back, is that true? Also can you please tell me about how many inches long this gun is? Thanks!
JRizzo10 3 years ago
nope, the gun is very balanced. the gun i can tell you is no longer than 15in. I forget its exact measurements, but its pretty small and compact.
airsoft111 3 years ago
Yea this will be my first AEG if I get this gun. I am looking for something solid and compact for CQB and for playing in the woods. Is the range good on this gun for being a smaller M4?
JRizzo10 3 years ago
yup, it has good range but is a bit less accurate than the average M4. If this is your first gun, you wont regret it.
airsoft111 3 years ago
hey what mags do u have and should i get cuzz i mean i dont want like 35 buck on 1 mags from ics
airsoftwarrior1 3 years ago
i have MAG 100 RND midcaps and a 110 round VN mag by G&P
airsoft111 3 years ago
is this better than tm and ca and can i use this in woods
airsoftwarrior1 3 years ago
i cant say its better overall, but this gun can be used for anything but not as good as the normal M4
airsoft111 3 years ago
should i get this for my birth day sept 12 or wait for the echo 1 p90
AirsoftTurd 3 years ago
def this. Its much more worth it
airsoft111 3 years ago
is this gun worth getting as a main gun?
P.S. that gun is zetta sexy! lolz
PineappleGuy2 3 years ago
yes man, very.
airsoft111 3 years ago
yea i have a gemtech blackside on her and danggggggggg man u talk about looking good if u get 1 u havr to hace it!!!!!!
airsoftwarrior1 3 years ago
I just got one of these, and I wanted to see if anyone knew...if the JBU M4 SD kit would fit on this?
Also, I have a wobbly fire selector switch, and my dust cover wont close at all...other that that its really nice.
holliday1234 3 years ago
is it worth getting? because this is the last gun Im getting for a while
PineappleGuy2 3 years ago
definitely, about to post up a new review, got a new, better camera
airsoft111 3 years ago
whats the fps and rps
paintballz4ever 3 years ago
i downgraded it to 280-300 FPS and the RPS is around 16-17 a second. Not bad :0
airsoft111 3 years ago
can you attach a stock to it?
jimbo9203 3 years ago
check my other videos, yes you can, but it will take some knowledge and my other video explains it
airsoft111 3 years ago
watched them. thanks
jimbo9203 3 years ago
ok so does this come with the bax thing? or do i have to but it? and also can i put an m120 and a tighbore in there? im getting it from airsoft gi
halorocks59 3 years ago
bax?
airsoft111 3 years ago
bax = hopup???
sesti21 3 years ago
woops i meant box
halorocks59 3 years ago
Yeah, it comes with the PEQ BOX
goldeneye007662 3 years ago
also i think im going to get the CA XM 177 insted cause its longer and i wont have torouble with putting a longer barrel on it.
halorocks59 3 years ago
how much does this gun cost?
wiggyman1 3 years ago
around 200$
airsoft111 3 years ago
lol its like a M4 Mp5
imbordashell 4 years ago
yeah, a machine pistol
airsoft111 4 years ago
i'm saving up for the ICS M4 but gonna take awile to come up with $300 plus battey and charger and shipping and accessories but when i get it it will be worth it (it better i plan on putting over $500 into it)
imbordashell 4 years ago
wait whats better ICS M4A1 or Olympic Arms PCR-97 M44
imbordashell 4 years ago
the PCR has a RIS. But whatever floats or boat about the handguard. I'd go with the M4A1 cause i like normal handguards but whatever you like
airsoft111 4 years ago
not the one on pyramid air it has a normal handguard
imbordashell 4 years ago
imbordashell there is a website (kapowwe . com)
and they sell an ICS M4 with battery and charger and 2 hi-caps ;)
BigWowMovies 4 years ago
i know i was on there its $60 cheaper i'm thinking about getting it later on
imbordashell 4 years ago
well i got it on airsoft gi and i got a free poster of m4s and a hat
airsoftwarrior1 3 years ago
lol too bad i ordered a kwa m4 3 months ago its a good gun like 20 rps with a 9.6v
imbordashell 3 years ago
ya imbordashell i saw u commenting on boomstickkole's ICS M4 vid ;)
BigWowMovies 4 years ago
lol
imbordashell 4 years ago
ics all the way bro. dumb question but does that have scratches on it lol.
MarineCorps1342 4 years ago
naww! :)
airsoft111 4 years ago
Hey i dont mean to be a jerk or anything but you can put a grenade launcher on that gun. One of the guys i play with has one on his pistol.
xXOneShot9mmXx 4 years ago
no your not a jerk, but i did have a short MadBull Xm203 GL on it. Didn't look to great though... So yes, it is possible
airsoft111 4 years ago
Same here i have that gun and i thought that it looked madd dumb with the grenade launcher. I dont think id put one on mine anyways.
xXOneShot9mmXx 4 years ago
Well, its supposed to be fore CQB, try to keep it as light weight with minimal necessary accessories only. I have a vertical foregrip, rail covers and a VN mag for lighter weight and balance
airsoft111 4 years ago
Yea i have the same things as you i just need a vn mag if you want i can send you a picture of it and you could give me some tips and what i should buy for it.
xXOneShot9mmXx 4 years ago
sure
airsoft111 4 years ago
Hello,
Does this ICS M4 CQB Assault Pistol come with a battery or rear sight?
Thanks
Adrianyoungxx 4 years ago
sadly no for both. Thats why its only around $200 USD. But its worth it after you buy all the necessary accessories for it.
airsoft111 4 years ago
watdafufk
spanky91030 4 years ago
haha grenade launcher:D
Mubbet 4 years ago
i don't have it there any more, i just recently bought new accessories for my M4 and i'll make a new vid about that so stay tuned!
airsoft111 4 years ago
Damn that thing is tiny..... lol but from what I hear they are pretty good.
Mortal7567 4 years ago
yeah, they are very tiny and very affective for CQB. Plus the ROF is very decent as well
airsoft111 4 years ago
yo r the gears and gear box metal???
sammy789987 4 years ago
yes, all metal internals
airsoft111 4 years ago
realy tahts metal last one i saw like that was plastic it kinda sounds like the one in your video is plastic but yeah different companys make different guns or the same gun in different ways
PtodaWnYou 4 years ago
the gun itself is full metal
airsoft111 4 years ago
great video !!
crimpsonsun 4 years ago
Thanks :)
airsoft111 4 years ago
well on the brightside of it being a cqb pistol u can pwn ppl with hi fps and its an ics whats a con with an ics
123123000000 4 years ago
sure, the only con i can think of is the wobbly selector switch out of the box (now its now problem after some use) and the squeaky noise cause of the split GB but other than that, ICS is the way to go.
airsoft111 4 years ago
Do you have to put the battery in the P.E.Q. box?
SteveKY 4 years ago
yes, unless you rewire the plugs to the back, assuming you have a crane stock or a stock with a batter bag, other than that, the area inside the rails are way too small.there is one more way, you can buy a ICS ready mag, and a hollow shell store the battery, but the long wires will look funny
airsoft111 4 years ago
It CAN NOT Hold A 8.4 mini?
JaySkuh 4 years ago
yup, i tried every single direction possible, its just built to hold the nunchuck style battery
airsoft111 4 years ago
T_T so its smaller than a marui sig battery space cause id like to buy one but i only have 8.4v mini batteries.Are you sure cuz i have some large 8.4v in my marui sig ppl say it cant be done but i did a lil modding and well ya lol its in forgrip still rather than like in a peq box
JaySkuh 4 years ago
You can try and chip some pieces off the inside but i wouldnt recommend that. Im pretty sure, i tried to put it in, and it wouldnt go in, its just designed for the nun-chuck battery
airsoft111 4 years ago
not bad :D
poyozer 4 years ago
thanks, its my first timer
airsoft111 4 years ago
haha ok thanks
jlknutso8721 4 years ago
no prob.
airsoft111 4 years ago
what version gear box?
jlknutso8721 4 years ago
WTF? i replied to your comment but didnt show up, its a Version 2
airsoft111 4 years ago
also what is the sping guide plastic/metal/metal with bearing?
jlknutso8721 4 years ago
when i opened the gearbox, i dont remember clearly, but im pretty sure its plastic with a metal bearing.
airsoft111 4 years ago
what version gear box does it have? all I know is its a 2 pice upper & lower
jlknutso8721 4 years ago
thanks did it come with metal bushings?
jlknutso8721 4 years ago
yes, all the new CQB versions do
airsoft111 4 years ago
NERD
coolpooper 4 years ago
your stupid, why did you bother watching?
airsoft111 4 years ago
Hey so just checking agian Nunchuck 9.6 battery? I'm going to get one in the near future but didn't know what kind of battery to get bc the sites either said costum or nothing at all. Thanks for the help
DeltaFalkon614 4 years ago
yeah, evike(dot)com has the one i have
airsoft111 4 years ago
your review make me go ~(~_~)~ says Twister026
Shinobi027 4 years ago
Where did you buy yours?
thartwig 4 years ago
i bought mine from evike(dot)com thats one of the cheapest one i can find
airsoft111 4 years ago
hahah your voice sounds sooo different ><
latinsoldierb 4 years ago
i know it so weird...I was talking to high too so the camera can hear me
airsoft111 4 years ago