Do you have any problem installing the dual bay reservoir into the 800D?? It seems like the slider slats are obstructing in the 5,25 bays! Has the EK reservoir any slots of these to prevent to cut the slider stats out???
@takimakikaki I have no problem with it. It's perfect fit. Yes, it does fits in DUAL 5.25" case bay. Very easy installation. Prevent to cut the slider stats out? Not really...but I saw paper instruction said If you bought extra impleres and you wish to change them, then simply unscrew all screws attached (with enclosed allen key) to acrylic top and replace impeler; to better block and fit flat in front case.
@takimakikaki In otherhands, Fill reservoir through fill port hole so it will close your reservoir with plug and tighten it with enclosed allen key. Very easy to enclosed without leak. It's absoultely a hundred precent prevent no leak.
Your flow is wrong your spinner should be going clockwise. And to get the res in the case bend down the tabs behind the res.Other then that nice build.Im running an EVGA classified M/B 2 XSPC rads with a single SwiftechMPC 655 pump I7 processor and 2 GTX 260s V/C with EK water blocks. The Processor is on a XSPC waterblock and i have the acetal EX Spinpoint res.
@EagleTalon423 i saw your videos very nice, btw. no it is going clockwise cause the pump is going to gpu first then second on cpu. spinner is way faster; if i addition two more graphic cards the spinner will be slow. And radiator is close to reservoir bay. I did checked computer turn off i can see spinner is going clockwise, btw.
Exactly the way how this epic PC case should used. :D
hokiturmix 3 months ago
@hokiturmix thx but sadly i just moved to Intel from AMD :P you can check out my channel and you will see what i got.
LJCH4E 3 months ago
Do you have any problem installing the dual bay reservoir into the 800D?? It seems like the slider slats are obstructing in the 5,25 bays! Has the EK reservoir any slots of these to prevent to cut the slider stats out???
takimakikaki 9 months ago
@takimakikaki I have no problem with it. It's perfect fit. Yes, it does fits in DUAL 5.25" case bay. Very easy installation. Prevent to cut the slider stats out? Not really...but I saw paper instruction said If you bought extra impleres and you wish to change them, then simply unscrew all screws attached (with enclosed allen key) to acrylic top and replace impeler; to better block and fit flat in front case.
LJCH4E 9 months ago
@takimakikaki In otherhands, Fill reservoir through fill port hole so it will close your reservoir with plug and tighten it with enclosed allen key. Very easy to enclosed without leak. It's absoultely a hundred precent prevent no leak.
LJCH4E 9 months ago
@LJCH4E Thank you sir!
takimakikaki 9 months ago
WHEW ok cool. Just trying to help ya out if it was going the other way. Not trying to be know it all......lol
EagleTalon423 10 months ago
My typos sorry its a EK spinpoint Res and the rads are 2/360 XSPC rads .
EagleTalon423 11 months ago
Your flow is wrong your spinner should be going clockwise. And to get the res in the case bend down the tabs behind the res.Other then that nice build.Im running an EVGA classified M/B 2 XSPC rads with a single SwiftechMPC 655 pump I7 processor and 2 GTX 260s V/C with EK water blocks. The Processor is on a XSPC waterblock and i have the acetal EX Spinpoint res.
EagleTalon423 11 months ago
@EagleTalon423 i saw your videos very nice, btw. no it is going clockwise cause the pump is going to gpu first then second on cpu. spinner is way faster; if i addition two more graphic cards the spinner will be slow. And radiator is close to reservoir bay. I did checked computer turn off i can see spinner is going clockwise, btw.
LJCH4E 10 months ago
Pretty sick dude.
spuchie9 1 year ago
Nice mate (Y)
MrProstat 1 year ago
great machine man :)
oOMoeRockOo 1 year ago
Isnt that a Asus 5870 V2 ?
antiamericanhero420 1 year ago
@antiamericanhero420 Yup!
LJCH4E 1 year ago
Nice build man .. Very clean !!!!!
antiamericanhero420 1 year ago