Fi BTL 18" Extreme Low Bass(loud as hell)!!

[bigjv2005]

Hi, you said that u have a 60 in port in this box?

[thugz4life1000]

where do u find em 18s at? how manny watts peak power? how much do they cost?

[bigge91]

whats your amp?

[iHockey28]

no wonder your amp got stolen thats a horrible place to put it.

[federico941]

WHAT IS SONG??

[xaviermaisel]

omg stop the rattling and then itll be good bass

[OffensiveProduction1]

too much power to stop it you wont be able to, once you start getting passed certain points all you can do is tolerate it or get lower powered gear.

[walacrossefreak]

thats all the rattle from the amp thats about to stop working cuz its screwed to the top of the box lol

[eltigrillotre11]

NEVER screw ur amps to the top of ur box!!! Why do ppl have to so so freking dumb..

[omairgeforce]

whats the reason, i also dont like to screw up amplfier cause vibration will make compponents lose inside amp , which they get really hot when in use so , soldering aso gets soft

what you say

[bob505470]

solder will not get soft through vibrqations. its perfictaly safe to mount your amp on your box

[bob505470]

dosnt do anythin. those amps have no mechanical parts. amps are made to take more than that.

[omairgeforce]

@bob505470

are you sure , well i am heard many many of times , and seen it

amplfier wont last longer if you give it strong vibration , components inside amplfier attach on PCB board , will lose and also it may fluctuate the power

which can be dangerous for amplfier

[bob505470]

@omairgeforce i dont know where you get your information but i know for a fact that vibrations cannot shake loose a solder joint on any electrical component i have built amps and know how they work.

[omairgeforce]

@bob505470

ok as you say so , i mean it

[tapfoot1]

i ment how many amp is ur alt srry lol

[jRilla187]

180

[tapfoot1]

how may amp is ur alt?

[cfl990]

That rattling of the amp is not good for it

[littlematt2007]

still want your amp =)

[mike200895]

whats the song

[jRilla187]

It got stolen over a year ago

[texasgame420]

@jRilla187 lol thats why u should hide it, instead of put it right by the window, where everyone can see it

[fanofCOH]

@jRilla187 sucks

[jbew0968]

nice lol you should move the amp before you rattle something loose

[suminoranother]

more than likely the box is "jumping" because the floor of the box is flexing. Im interested to know specs on your box

[jRilla187]

it was built using spec for a Mmats 18" juggernuat and it's aroud 6.5cu.ft. with a 60 in. port

[suminoranother]

cool, i had a tapped horn that would flex bad. would jump up and down like that. Check my vids, i havea n 18" MT. the box its in is 3 layers front, back, and sides, 2 layers bottom, 1 layer top, 2 layer port. no flex :)

[YoungJeezy333]

i havent got the money for a huge setup so im gonna buy 1 fi btl fully loaded and what amp should i buy to get the most out ofit..? thanks!

ohh whats the song..?

[SicSniper4unreal]

any amp that you can get 2000 watts rms clean with, pretty much your gonna look at 350$~ if you go to some site like audio savings, personally i'd buy an amp that outputs more than 2000 rms and just adjust the gain and meter the output till its doing around there, but a btl can take a wallsocket no problem, so 2500 wrms daily should be good as long as your power is clean, bigger amp turned down a little gives a cleaner signal at the desired power level. (because it isn't into the clipping area)

[calvinblinkee]

Which amp at the site gives out 2000 watts rms for $350? Brand?

[TheEvilOne343]

1 rockford 2500tbd1

[eed6d761]

What should I get for my 18'' BTL. As in equipment:

1. Amp

2. Box (DIMENSIONS)

3. Wire

ETC. Can anyone help me out? Anything would be much appreciated, I'm new to the audio scene.

Thanks

-Alex

[chevyman217]

t4000.1 bd there selling them real cheap

6.7 cubic foot box tuned 31hz

all 0 gauge wiring for power and ground 10 or 12 gauge speaker wire

2 good bats and maybe a ho alternator.

[hondarider225]

i have the same problem.. i want to know wut kind of amp would push a BTL very good. and box dimensions haha..

But i think these dimensions might work...

3 x 1.5 x 1.5= 6.72 cu.ft

specs call for 5-10 cu.ft so...

[JayErby]

Ok if i get one 18 then i need to get a 2500 watt amp to power it. Ho whard does one 18 hit. Is it like having 2 15's

[TripleThrillFilms]

on my computer it sounds like a big long faaaarrrt lol

[homero52312]

is that sealed or ported??

[funnyface680]

ported.

[mike05937]

I woulda stole dat sht too ( j/p) lol... but damm.. i kinda expected more power out of a HCCA 5000??right? Seems like you shoulda been able to power 2 btl's off of that with the proper Batteries, alternater and o gague wires..

[jRilla187]

I would have had to wall off my whole backseat to fit 2 of those mammoths in there.

[2006421Banshee]

where u get that song man drug money i cannot find it or even chopped and screwed ...

[kmirts]

wrong u know that the shitty hcca 5000 is only 2500 watts rms and it is probably overrated by a few hundred watts atleast. companies that overrate their shit and list the peak output not the rms is shady and not worth it, but it is pushing htst btl pretty good

[jRilla187]

It's ratted for 5000 watts if it's bridged. But Orion says the amp is not bridgable.(What the Hell!!) However it is a very very durabled and consistant amp. I had that amp for over 5 years and it never overheated or went into protect mode not once. Never had a lick of trouble from it. 2,500watts@1ohm and 13.7 volts

[sparco317]

whats your low pass set too on your amp?

[jRilla187]

i dont know it got stolen

[keithmoonlethal101]

did every thing get stolen or just the amp

[jRilla187]

the whole shabang

[keithmoonlethal101]

how did that happen

[demizebp]

how'd that happen?

[jRilla187]

27hz

[Villeza1]

What's your box tuned to? ...if its ported

[slrmclarenf1]

whats the song name

[maximusde34]

Might want to get that amp off the box.  Eventually things will come loose and the PC board may crack from the vibration. Sweet sub, I have one too.

[siskar13853]

whth that alternator does your lights dim or anything when u turn them on whth the bass real loud.

[jRilla187]

yes

[TexasBoy047]

whats the name of the song??

[siskar13853]

hey man on that 5000 watt amp what type alternator are you running how many amps alternators?

fi btl is the best

[jRilla187]

stock 130 amp right now but im going to get a 300 amp irragi alt.

[grulkesam]

irragi is junk get dc power alts 200amps at idle 270xp!!

[MARTRELL17]

no wonder she droppin so low. thats 5 thousand watts lol..

[itsgottabme]

hey man runnin the same sub. awesome bass, any way u could send me this song its hot.

[172910]

AY CAN U SEND ME THIS SONG MANE

[pedaman]

man holla at me i wont the slowwed version i need that

[IKE5327]

Nice! Would the amp get damaged when mounted on the box like that?

[robBASS6]

ay dis song is hot man could you send it to me?

[liteonit3]

Damn =[

I think that song sounds good on my JL 13w7

Can u share the song? =D

[jRilla187]

This song does have really low notes...my 18" btl is the only speaker I've had that can really pick these notes up.

[liteonit3]

Nice!

What song are you playing?

[jRilla187]

subwoofer volume is only have way up...earthshaking low bass below 30hz