'85 Chevy K20 383 Burnout

[METALSLAYER1000]

im restoring a 85 chevy c10

[MrBigblockben]

Dont let ne non-gearhead fuck that probably drives a honda IN REAL LIFE put you down . you got my vote . and wise choice on burnin another set of tires BLISTER UM!

[C0PENHAGENC0WB0Y]

nice truck, you done good work on, looks great and you saved your tires with some old shitty ones on, 383 stroker is a hell of a motor, had a 87 swb with one ran a 8.81 in the 1/4 mile, but couldnt handle street tires not enough grip with all the power

[berserker2111]

everyone is having a big dick contest with the negative comments... maybe a bunch of fags? but anyways... sick truck man!

[smitty11543]

Nice man great lookin truck

[TheLonleyDrifter]

how big is that cowl??? NICE TRUCK

[454apache]

What size lift and tires are you running? I really like the stance of your truck. Great job!

[ESVAb0y]

seriously? damn people now days, listen thats a 383 a burnout like that will not even scratch her durabilty now a normal 350 its a lil hard on but still a burn outs a burnout no matter what you do it with as long as its not all day every day it doesnt hurt it, the only thing it hurts is tires and by the looks of it he threw some old tires on just to fry up, Still she sounds sweet and looks sexy, nice job bro.

[devilselbow]

Sick burnout, sick truck, fuck the haters.

[canadianfuture]

@devilselbow - I agree with you, this was an acceptable burn-out. This is more than likely a 3/4 ton truck too. I have a 1967 chevy c20 Longbed. It still has the original 327 engine, and a very tired engine. But it still does solid burnouts. Check it out!!

[devilselbow]

@canadianfuture Yeah I'm partial to fords, but I'm no fanboy (fanboys are idiots). I love all trucks, the older the better. I watched your vid, with an engine rebuild or something you would have a killer truck dude. Pretty nice as is though :P

[MuayThaiFighter61]

short bed, long bed, reg cab, ext cab, short box.. as long as its a chev- its beautiful <3

[JakeBraker93]

are those 16" rims on the front?

[Baseballstud5964]

First you say u have a big truck. You must be lacking down low. And second I'm 6'5. Trust me I aint a small man, faggot.

[Zomgdevil]

what did you use to paint this truck? my swb c10 needs a paint job, faded baby blue aint cuttin it anymore

[badasschebbytruck]

hey man nice truck dont listen to these douchbags.... im building one like it right now same as you frame off but i started when i was 15

[GLWillaims]

watch ,toby kieth dis!

[TributeMusicGroup]

Fuck all the haters!!!! This is one fucking cool truck! You say you did all the work on it? How much did it cost you to build? I Really want something like this. And wanting to do the work on mine too! Again, Awesome job on it. Wins the best truck of the day for me! ;)

[4rednecks3]

Nice truck!

[HighTechRedNeck131]

Very nice truck man i built mine from the frame up too sadly tho it is only a 2wd i have not got to the engine yet it is still a stock 305 but what i find sad about this is that Baseballstud5964 is pissy about your burn out and how he can do a 100ft one..... My stock 305 can do that it aint hard he could have done one if he wanted you fucking sicking me baseballstud..... get a fucking life dude.

[TDem73]

very very nice truck, all the haters are just jealous they dont have a truck that is so clean

[1987GMCSIERRACLASSIC]

thats a nice truck you got there man, what size are your front tires?? and to all of you haters out there who drive ricers fuck off if you dont like watching real trucks.

[ElTexas454]

man your truck is awesome! i freakin like longbeds, thats waht i wana buy, a longbed k20!

[Baseballstud5964]

Fuck longbeds. My 73 c10 has gotta a 383 stroker. 467 hp and 534 ft lbs. I can lay a 100 foot burnout going 45 mph. Not impressed. Its just sentimental to you

[ALEXort2007]

@Baseballstud5964 Fuck you. A truck should have a long bed, its used for more than just putting around. All you have is a truck shaped car. Not impressed by your comment.

[Norco5327]

@ALEXort2007 really though , trucks are made for towing stuff, and carrying stuff around..... etc not made to look pretty with the short beds like fuck ..

[ElderlyIron]

@ALEXort2007 Guess he don't know what a truck is used for...

[Captain25011]

@ALEXort2007 hey, hey, its a k20 it's allowed to be a longbed and still be badass

[TheGloryfighter1000]

@ALEXort2007 haha amen to that a real chevy is long bed not a bitchy short box they look ugly to i have a long bed and just has as much power

[selfdestructionskate]

@ALEXort2007 i can go either way, i have a slammed 72 chev long bed and wouldnt have it any other way but i also race so the short wheel base helps in the mud runs

[localdu]

@ALEXort2007 long live the long beds!!! i have an '84 scottsdale longbed, and i love it

[corvette454l88]

@Baseballstud5964 long beds should be 4wd, short beds should be 2wd. And i also gurantee your motor cant do what you're saying it does. so quit shitting on everyones videos

[Todd86K10]

@Baseballstud5964 What is wrong with long beds your just wishin you had that box on your truck.. FAG

[savageboner]

@Baseballstud5964 you have small penis syndrome eh?

Sorry to hear.

[utoobdude67]

@Baseballstud5964 Always got be a dickweed in the crowd. And what are you doing comparing a 2WD to a 4WD? Many prefer short 4WD too, but I don't. Much better angle for the driveline with a lift. Of ourse 2 wheel lover wouldn't understand that. And for your 100ft burnout, you're about an idiot. My 350 will spank your 383 in my 2WD Long Bed, because I know how to design suspension to hook up and put the speed to moving the vehicle. Not impressed by a 100ft burnout, 11.25 in the quarter does tho.

[Norco5327]

@Baseballstud5964 You have a small truck for one and only one reason , your a small man.

[philthyco]

@Baseballstud5964 you have no clue!and lets see a vid of your truck if u even have one!lol!

[kamakazzii]

@Baseballstud5964 Do you really think that this guy cares if your impressed or not?. Do you think he woke up one day and said wow i better go make a video of my truck, and make a burn out just so i can impress Baseballstud5964, I don't think so. And to your 100 foot burn out wow you want a brownie button or something?. and if you really want to go there. your trucks a pussy compared to mine. i can roast and i do mean fry the tires right of my truck down the whole 1/4 mile. Thats 2,640 feet pal.

[MrSilveradoss408]

@kamakazzii ummmm....................buddy­, 1/4 mile is 1320ft. 1/2 mile is 2640ft. Seeing your videos though, I wouldn't doubt that you can burn em for 1/2 a mile.

[kamakazzii]

@MrSilveradoss408 Ya "1320" lol thats what i ment to say .LMAO

[scorphound]

@Baseballstud5964 this coming from someone who is not posting a vid of his truck doing a burnout

[OriginalKyleHD]

@Baseballstud5964

sir you got shit on. that's what you get for talking shit.

[Pedratempa]

that motor run hot there son. you build er?

[ALEXort2007]

@Pedratempa Yep, All of it.

[crusade314]

Sounds Sick Man! Beeeeautiful!!

[jamespbrownjr1]

but it ant a drag truck

[jamespbrownjr1]

i mean i have a 85 chevy 2wd whit 373 posie and 408 its bad as hell but it had a 383 in it an it was bad as hell then it run in the 10s now

[teamWFO30jr]

nothing like the power and sound of 383 nice truck man

[dodgekid83]

Sick Truck, whoever talks shit about it can go fuck themselves.....

[crazymatt383]

I got a 77 and I'm getting a 383 stroker put in it. 

[razzmire]

@crazymatt383 how much that gonna cost? ive got a 77 too and the 350 aint cuttin it

[crazymatt383]

@razzmire $2100, That is not a bad price. I should have it back in the next two weeks and i will post so videos. Alex (the guy with my truck @makemfastmotorsports) said it should have around 380-400hp! Where are you located?

[razzmire]

@crazymatt383 well i wont be gettin one lol cuz the truck needs a tranny rebuild and i blew up the motor oin my racequad on saturday

[crazymatt383]

@razzmire well that sucks. I will have my truck back at the first of next week. then i will post a video soon!

[TheGhost93]

my motto has always been "drive it like you stole it" nice truck man makes me miss my old k10 alot! 

[suzukirm80]

good lookin truck man. nice to know youve done everything yourself. Reminds me of my ol' 80' k10. dont listen to these idiots tryin to tell you there shits tight. Pure jealousy!

[86LiftedK10]

sweet truck bro,screw everyone else. i wish i started with my k10 earlier but at the time i had no money...im starting to build it now ,im 17.

[buttloco]

Still doesn't tell me anything about your truck except that youre tearing it up for no reason. I say again, nice hoodscoop, haha. My K5 would drag that crusty piece of shit all around the world.

[ALEXort2007]

@buttloco What exactly did it tear up? Nothing at all. The cowl hood is functional, lowered underhood temperatures by about 100 degrees. I purchased this truck when I was 14 and did a complete frame off restoration and had it finished by my senior year of high school. I did everything from rebuilding the frame, engine and even paint work. Nothing you say can take anything away from how nice this truck turned out. Just admit you are jealous of the fact you don't have the skills to do any of this.

[cowboytroyJN]

@ALEXort2007 great respect for this guy and his truck

[bradlee101]

@buttloco lets see your scaby ass k5 then .. i call BS!!!

[jamespbrownjr1]

i domt know 383 are bad as hell but it spend to much

[ALEXort2007]

@buttloco You must be the dumbass. It had a detroit locker in the rear and didn't tear anything up at all. Basically, shut the fuck up if you don't know what you're talking about, which you don't.

[buttloco]

Bunch of cooter-kids ruining good old vehicles. Nice hood scoop, wanker!!

[Cadillac117]

Who gives a flying fuck about the tires dumbass

[titanrage83]

good job dumbass. you just wasted awsome tires to look like a fag

[ALEXort2007]

@titanrage83 Apparently you are the dumbass. If you look I don't have the same tires on the back. They were some dry rotted mud tires that came with the truck when I got it. I guess you are just jealous?

[bradlee101]

@ALEXort2007 that kid is a fucking morron .... SWEET BURNOUT!!!!

[flecur08]

@ALEXort2007 i was about to say the same thing. The rims are different, the size are different. These are apparantly some shitty yard tires. not good ones.

[soja4life117]

@titanrage83 lol your a fuckn idiot lol

[Bandito8487]

What size lift and tires do u have???

[ALEXort2007]

@Bandito8487 4" and 33x12.50

[zombiewatcher729]

Nice truck. I just got a 77 k20 I'm dropping a big block 500 in it this weekend.

[MrMuddawg]

@zombiewatcher729

500 is a caddy big block right?

[zombiewatcher729]

@MrMuddawg Yes caddy big block they came in the el dorados from the early 70's until like 76 I think. I'm aiming for around 13mpg but we shall see. I'm waiting on a break in the weather.

[drkhntr00]

@zombiewatcher729 whats the deal with those 500's do they bolt in to the stock tranny or do u use an adapter plate?

[zombiewatcher729]

@drkhntr00 They come with a turbo 400

[jbrowinmaine]

that was a power brake not a burnout. a s 10 could do that

[ALEXort2007]

Well then put a video up of you in your little s10 and see who cares.

[miked3859]

what the hell do you think a burnout is

[GMCMan29]

@jbrowinmaine

thats a burnout, dumbass, powerbraking is when you use the stall on the torque converter to launch.

[carguyzo6]

Nice vid my friend has one with a 383 and 6 inch lift with 35 inch tires and he spins them really easy gotta love the power of a 383.

[DRNEGOLICIS]

i did a bad ass one like this to bad my buddy didnt tell me the camera was out of memory i would do another one but i put brand new tires on ill probably do it when i change the tires again

[muddslinger2008]

a 383 stroker is a 350 block .30 over with a 400 crank and rods. that makes the piston move more and faster which means a lot of low end torque and a lot of top end horsepower. If you want to build one i recomend going through jegs or summit and buying all new parts it ends up being about 2000 cheaper than buying a 383 and about1500 cheaper than having a block bored to build one.

[sayer308]

i got the same exact truck but mine is stock : (

[1DieselFuelOnly1]

Nice truck. 3/4 is sick. Not a fan of half ton junk js

[sww1608]

Nice burnout....

[farmerboy184]

Fuck yeah POSI!!!!! dose that thing have headers????

[ALEXort2007]

Headers and glass packs

[chinchillawrangler]

whats a glass pack and whats it do?

[1966caprice]

glass packs are a type of muffler that use fiber glass to muffle the engine their louder then most mufflers

[amansdog]

well your best bet would be to find a 283 and build it or a sb 400

[luvsgsxrs]

fuck yeah

[fordapod7]

bad ass i want to put a 383 in my chevy but ain't got 12k for a crate build but i want to supercharge my 350

[Whatthefuckisgoingon]

it doesn't cost that much for a crate build im gettin mine about 4k but if u want a real good one bout 5-7k

[TexasRejectsleader]

for 12k you can get a 454

[DECO23063]

for 12k u can get a 502

[TexasRejectsleader]

yeah that too lol and a 7.0 ls7 i think it's 12k lol

[tothebrain]

383 isnt an engine 383 is a 350 with 400 crank

[1986trx250R]

i think technically a 383 is an engine lol.

[wallythebadlyburned]

it is a motor its a 350 block with a crank/rods that gives it a longer stroke increasing the displacement to 383 cubic inches from 350. Everyone refers to them as stroker motors ...

[1986trx250R]

i know, but a rod cannot increase stroke, and also the 350 block needs to be .30 over to be a true 383

[AJahtp]

no, a 383 is a 350 block with a 400 crankshaft.

[wallythebadlyburned]

actually i have been building rods and motors for 20 years for a living you can achieve a 383 in any number of rod length, crankshaft ,bore diameter combination's. Just depends on if you want top end torque ect. Yes that is the most common way to achieve that however. You can also use different rods and a 307 olds crank, diff rods and a 327 crank and high top buick heads ect, ect.

[alpinetypeR666]

it only cost 6000 to build a 350 to a 383. just got done wit mine a month ago

[ALEXort2007]

I only spent $2200 on the engine build. The only stock piece I used was the block. New crank, rods, pistons, heads,intake, oil pan, bolts and machine work.

[alpinetypeR666]

ya, mine is ridiculous tho, imma have to get a vid of it up

[sexton1746]

ya man you should check out my truck on here thats just my 350 but it runs 12's!!!!!

[SuffolkSwamper]

K20: K designates 4x4. 20 designates 3/4 ton.

[ELBOWtheREDNECK]

so whats the difference about a k20, what does it mean, 3/4 ton?, ive never really found out

[sexton1746]

shouldnt a 383 be able to hold a 2nd gear burnout? ive got a 350 that will go through all 3 gear and prolly have less money in it than you do yours.

[ALEXort2007]

The shifter was not going from 1st to 2nd, it was going from 1st to 3rd plus mud tires on county roads. Once I got that fixed it would go through 3rd no problems. I only had about $2200 in that total and only started with the block. Everything else was new including all the machine work.

[1986trx250R]

Its a good strong motor, turning both those mud meats on pavement! and i know from experience that the 3/4 ton drive line loves to soak up power and never get it to the wheels. not to mention the 14 bolt rear end weighing down the tires. Nice engine!

[Kautzk]

duhh he doesnt have mud tires on the back and it doesnt take much to spin them they have the least amount of rubber on the pavement der

[1986trx250R]

ok asshole diameter of the tire can easily make it harder to spin, generally mud tires are bigger. Also they are usually wider and use much less psi. so i bet the amount of rubber to the road is most likely more that that of a street tire smaller and inflated more. And how do u know they arnt mud tires.

[ALEXort2007]

They are mud tires on the back. They had about 9 or 10 inches of tread on the ground.

[cowboyupgt7]

haha nice truck man... I have an 85' chevy with a 383 stroker that looks almost exactly like that! do u got a lift on that? wat size?

[73GMC1500]

Nice. I have the same truck, but an '84, and mines rusty. I noticed some shifting back and forth- was that between 1&2 or 2&3? My 383 will pull 3rd doing a burnout usually.

[matt31154]

nice truck man

[chris12345tube]

my brothers got a 85 with a 383 stroker elderbrock high rise intake and a holly 750 carb. that thing is fast; it scares the crap out of me

[ballsnot]

U got that chevy sounding good

[fdude1234]

sounding good?

[ALEXort2007]

Yeah, Detroit in the rear end keeps them both spinning :) It took longer than I expected to hook up, but when it did it took off. Thanks

[ryaneirich]

It's good to see both of them spinning! The best part of burnouts is letting off the brakes and letting it hook up and seeing the power.