How to custom paint your Xbox 360 faceplate ( Tutorial )

[OpTicRiVAL]

Okay

[taser68]

are you old enough to be playing with a hobby knife?

[Lonewolfsoldierboy]

Don't mind everybody else, you did this to help other people! Thats what counts! Thx

[myfavorites2865]

this is crazy

[footballkiddtaylor]

THATS AWESOME



[millermilet]

Cheap ass paint by the way

[slenderface]

@millermilet Krylon Fusion is the paint that works best. dipshit.

[millermilet]

@slenderface chill ok? I've make better paint by myself...

[slenderface]

@millermilet lol You made paint?

[millermilet]

lol sounded like "Ok next u need sum hater tape..." I was like "What tha fack? ohhhhhh!"

[kerryoliver87]

"just try to rip it off"

snapping noise

*inbackground* so of a

[steelers471]

the bottom is still white...

[untamed112]

@steelers471 haha you saw that too haha

[harleybrandon1]

it only cost 3 dowarrrss

[azboss602]

lol at 4:39 to4:44

[etho2016]

always put on light coats... then you spray a huge glob of it on the bottom

[punishersamp]

if u say Ok 1 more time im gonna rip your tongue out i hate it when fucking ppl keep saying ok ok ok

[TheYakov2020]

don't you need to apply clear coat too?

[CCModZz]

OMG that is the worst faceplate i have ever seen. That is so bad. Dang why woukd you make a tutorial?

[jDmBoY302]

did you sand it?

[LilKody765]

rrrrrrrrrrrrruuuuuuuuuuuuuuuuu­uuuunnnnnnnnnnnnnnnnnnnyyyyyyy­yyyyyyyyy

[kwamithegamemaster12]

thats awesome how you can still see the xbox controllers prints in the table

[MegaLewisP]

you dont know what your doing :L.

[tmicmagic]

just pop the clips around the edges with ur finger nails...its way quicker

[KevHedgehog]

Shouldn't you put a base... then red... then black. (Yea, I know it's white but you can never be too sure.)

Also... umm... I would wear a mask, especially since it's windy.

[icecreamsick]

/watch?v=6NTvTKAHhiA  Check out my faceplate ;)

[ProofVz]

Anyone else kinda thinks he started going through puberty in those 15 minutes?

[TheHyperDonutsVideos]

your an idiot you dont have to cover the push button with tape you can go right over the only thing you wanna be conserned about is the see through part but then again it dosent really matter

[iiReVeaLz]

ok

[iisuperxflashii]

wheere can i but a faceplate?

[KyZookHD]

@iisuperxflashii i can do one for you. pm me if your interested

[TheHonestLiarr]

Or is it black with red stripes O.o

[1212scott1]

nice dide, im going for FALL camo on mine!

[10cmdolan]

why shouldnt i use the faceplate that comes with the xbox?

[adnanf27]

U could take the face plate off

[TheMajorAssassin]

I hear a really creepy laugh at 4:38

[goliprop]

@TheMajorAssassin me to :P

[gh3legohero]

or is it black with red stripes?

[TylerFLEETWOOD44]

Well my xbox broke so i can do what ever i want with the faceplate kid so shut up

[KTCustomz]

i think ill give this lil kid props for making a vid but ... not for the paint job ... if your gonna do it just do it right and use adhesion promoter not the junko plasatic spray paint crap ... o well .

[xiTwisT]

At 3:59 huge orgy

[xiTwisT]

At 0:54 total orgasm

[xiTwisT]

Nice Shoes dude.

[wasdifyable]

lol u can see xbox controllers on the ground..

[spudvader86]

U should wait 24 hrs before you put tape on the sprayed faceplate

[NighthawkDMG]

nice heavy coats

[TheTutzz]

where can you get the spray paint from

[jjfjj913]

did he say 3 dorrers?

[muttins516]

baby dick



[muttins516]

baby dick



[x3uroutzt]

hey everybody...i think we're always supposed to put on light coats....

[wackycoquis]

horrible

[YbcRAz]

so ugly stripes

[poopdoo1]

how many more times are you coing to say ok?

[ToonSxO]

is it red with black stripes..... or black with red stripes O.o the world will never know.....

[LoLaGeXP]

have u gt live

[LoLaGeXP]

do u have xbox live??????

[CODblackopsclips]

Why don't you just take the faceplate off completely?

[funnyflix2]

Why shouldn't you use the origonal face plate?

[NGTprogaming]

"it tooks alot of time and alot of patients." it took u no more then 2 1/2 hours to makee that....

[XboxModderGod]

What's the deal with some people sanding their xbox faceplate before painting? Like, just sand it down with sand paper? Also, what spray paint is the best to use?

[AqwWarf]

hes mr macky from southmark ...mkay?

[OHBUCKEYESisBACK]

your supposed to put the lighter color coat on first so it doesnt take as many coats to cover it up.

[glockma12345]

hes anoying

[Impulsificationify]

thats beast kid imma do that loool (:

[myvette902]

should I put on light coats?

[MrMLSman]

use a different faceplate. just incase you get red ring or want to sell it

[bassjunkie223]

GAAAAAAAAAAAAAAAAAAAAAAAY VVVVVVVOOOOOIIIIIICCCCCCCEEEEE­EEEE

[junebug9594]

clear coat???

[DCMichaelDWolf]

im gonna do digital camo=)

[MultiMightymatt]

how long should it take to dry if i used flat black paint

[TheParadoxNine]

i did nothing in this video and mine came out better

[TUHZIPUH]

you can pop the senser part out i always do, just use table against it.

[Cullen6995]

gay shoes

[DiscomposeGaming]

Lol i missed it is it light coats lmao

[iiZzxFilmsUK]

LMFAO AT 4:40

[WeAreiG]

2 Questions...

1. What kind of paint should you use for this? Is metallic ok to use?

2. When you have finished does it make the faceplate significantly bigger?

[MrTmy82]

@WeAreiG i paint controllers and recommend Krylon. mettalic is brobably fine, and no, the faceplate doesnt get noticeable bigger unless you go wayyy oveboard with the coats

[TQSGAMER15]

that kid says OK too many times

[Abcgum64]

*No Laughing!* lol

Anyway great vid bud, going to go for a silver color today on mine

[Programtimeconsuming]

"I don't think you should use your original faceplate cuz, idk, just don't". lawl

[wheeties81]

Why do you need the Knife???

[weezyfan25]

is your name jacob?

[WalkThroughMaster100]

@weezyfan25 no

[weezyfan25]

@WalkThroughMaster100 sorry i thought u were some1 i kno

[AmpliphyHD]

@weezyfan25 wtf. i know a squeky kid who lives in edmonton

[xBABYGaming]

Dude you should sell these!

[Andyk9595]

you dont need the paint tape just take the plate off?

[DoNaVaNq]

to take off faceplate

put thumb in USB SLOT

push up

put ur 2 fingers.. any on top.. pull

wait until it pops when it pops.. put ur thumb on top line.. and slide it down slowly..

[Dregkar]

@DoNaVaNq Lol I just rip that shit off.

[DoNaVaNq]

where do u get exacto knife.. or hobby knife??

[WalkThroughMaster100]

@DoNaVaNq any hardware store

[THEHORNEYRABBIT]

@WalkThroughMaster100 and you need a hobby knife why. Is it for cutting the paint tape???

[WalkThroughMaster100]

@THEHORNEYRABBIT the hobby knife is very used full it will also help with other tasked too trust me

[ChaseLitzner]

@WalkThroughMaster100 useful*

[azboss602]

@WalkThroughMaster100 killing??

[MrTwistedjunk]

@DoNaVaNq Lowes ,wallmart,kmart,home depot ,auto zone

[DoNaVaNq]

okay..*whispers*pause it.. tehe heard u :D

[KryptoniteAceHD]

nice

[tgunsell24thmich]

ok i paint xbox's for a company and i would never use fusion to paint any xbox. the paint would never hold up to any kind of use. but i do have to say the kid is pretty smart for what he did do

[JuniorTheKidVelikov]

learn to talk i couldnt understand you

[sickberrywood]

Not to be hating i mean its a good vid but u say put on lite coats u are a little to close back up a little and then it will be a lite coat

[crzysmie79]

so is this pretty much the same way as spraying your controller? or is it different paint, and covering the sensors

[Tacdelz]

nice job dude. really talented! :D

[Banjooo96]

i love the way he sounds when he sped it up at the end

[thunder2productions]

that was a nice video even tho your a 11 year old

[Kamkut17]

cool vid but when i tried ti '' rip the facplate'' i aculally broke it in half

[WalkThroughMaster100]

@Kamkut17 ooooooooo that really bad

[tgunsell24thmich]

@Kamkut17 no wonder you broke yours in half thats not the way to take off a face plate grab at both sides of face plate and slowly pull off

[sibi12123]

i spraypainted mine gold rofl

[VonWhyNoob]

is it just the same to paint the WHOLE xbox? not only the faceplate

[WalkThroughMaster100]

@VonWhyNoob Ya its the same paint

[phatmonk6195]

why are you using gloss paint? you shouldn't mix matte and gloss but paint it all with matte and give it gloss clearcoat.

[cazzamanda]

nice tutorial :)

[iltkil]

Fair play to the kid, he made a decent video. Was thinking on how to do this my self actually.

[KSTSnipers]

I just spray painted mine :D I'm just waiting for it to dry now so I can take off the tape hope mine turns out good :)

[NickCavegn]

Thanks lil dude! Helped me alot!!

[Armaangandevia1]

nice lol you can see on the side of the face plate you where painting controllers you know on the paper

[eddiehalenvan]

hate kids like you man. get off xbox live and start playin wii!!!!

[malamix9]

lol.sad little american kids. listen him whisper pause it after he says okay for the billionth time at 2:00

[xMotiionzHD]

nice vid XD subed

[demon99088]

where the fuck is the second layer

[XDiZaSteRzX]

looks nice nice job

[CFabian88]

1:07-1:19 thats what she said :p

[IGoTurSk8]

how did you put the painter tape perfectlyon the sensor and the power button?

[07r21]

Nice faceplate dude check out our videos we just need to get some spraypaint

cheers :)

[SMCandALP4lifee]

can you paint your power button? like not the led light covers, but the actual power button itself, cuz im thinking of doing my faceplate black, including the the power button, but i will cover my led lights, is that alright, or will i not be able to do that?

[WalkThroughMaster100]

@SMCandALP4lifee yes u can

[SmexxiWaffles]

@WalkThroughMaster100 i guarantee You That yourfaceplate Came out a little different than you expected, you should wait at least 3 hours before putting tape on your last coat.

[LVxGAMERSx]

@SMCandALP4lifee ya but you need to tape the led perfect.

[Nandosgaming]

@SMCandALP4lifee take apart the xbox to get to the bear button so you wont affect the led

[ImPlayingOnThePc]

Becoz Im aussie, Imma have to get My Paint from Bunnings -.^ Does the sticky tape have to be painters tape??

[WalkThroughMaster100]

@ImPlayingOnThePc ahh yes best when ues painters tape the paint u spray on will not come off unlike sticky tape will peel off the paint off

[DjMotoXDude]

@ImPlayingOnThePc HELL YEA GO BUNNINGS!!! xD

[RickyIsTheCooliest]

I wanna do this so bad,but i'm afraid i'll fuck up xD

[WalkThroughMaster100]

@RickyIsTheCooliest hey dude just do it ok dude then your skillz will reveal

[ridein34567]

ha i would like be like shit i broke my face plate wtf

[elitemodder1]

on how to take apart an xbox 360 controller how do you take of RT&LT buttons off

[supercoolperson14725]

OK!!!

[followmike]

hes like "OK! Pause it" haha at 2:03

[guitarfreak1363]

STOP SAYING OK!

[TheThreeUnited]

hehe.... 4:40 thats the creepiest laugh ever!

[TheThreeUnited]

that may be the ugliest red ive ever seen.......

[BaileyDW1]

light coats my ass!

[cfsnipa]

do i need a clear faceplate im going to have my homie spray paint or sharpie it

[WalkThroughMaster100]

@cfsnipa ok first of all DONT SHARPIE IT!! because it will ruin the faceplate in a bad way and you can use any faceplate but i consider white instead so u should go to gamestop and buy a white faceplate there

[cfsnipa]

@WalkThroughMaster100 why cant i sharpie it spray painting sucks and im having a grafitti artist do it for me

[WalkThroughMaster100]

@cfsnipa ok then do it your way

[dragonclam1]

7 seconds in, 2 things to say.

Get that dick out of your mouth.

Get that microphone out of your mouth.

Im sorry but its how the world spins.

[tazerdude]

when ur faceplate was done did it feel rough

[WalkThroughMaster100]

@tazerdude No it was not rough when i put on the clear after the video

[hootentogger]

protip- always paint in the same direction

[jonasgowdy1]

hay i paint custom face plates im pretty descent send me a email faceplatess@yahoo.com if u would like me to paint u 1 the cost is 20 dollars not including shipping

[Hummers222]

very nice job. you are smarter than me and i am 17. i spray painted my psp gold and i only put on one coat of paint and now it gets scratched easily

[jonasgowdy1]

next time take the memory bays off

[jordantylerg]

Hey look someone painted there controler lol

5stars

[U2DU]

you are a very smart boy :)

[XHaterAidX]

lol "do it again! NO laughing!!!!"

[GJUnLeAsHeD]

u should make a entire 360 custom painted

[Frankienburger]

heh heh, u can see the marks from where he sprayed his controllerz!

[Quiza4]

Did u say 15 or 50?

[maheen38]

@Quiza4 15

[MiddleEasternGuy]

You should've at least edited out the part where you screamed "NO LAUGHING!'.

[XXXXDANNYXHARDCORE]

lol like dennis the mennis lol

[TwoForOneProductions]

i got the 15 minutes part lol, like x5000000000000000000000

[ephockeykid15]

1. Is there a damn tornado in the background??

2. You said ok way to much .

3. We get you need to use light coats lmao

4.get some clearcoat

[zellersboy]

Message me for faceplates 15$ any colour custom made max 2 colours 3 colours is 20$

[cullofduty101]

We get it LIGHT COATS!!!!!

[210BelowZero]

you have no idea about what your talking abt its called krylon fusion and you call that a light coat

[zellersboy]

You need klearkote or any clear coat

[crazymunu]

u are such a toy

lmao

[effectsmaker]

hahahahaha noooo laughing

[TODDLOG123]

Its black with red stipes LOL