@MrTechnoSavvy15 easy. a link bar for the shifter. cause gear seleciton only happens in 2 directions. noramlly up and down. but you cna rotate it so its forward and back too. and clutch is via cable so that can be done as ell
@piddydog I wish so, too, but back when I shot those videos no one had heard of You Tube. After I sold it I had to go through the few videos I had shot to make this video, and it really doesn't do this cart justice, it was a lot wilder than these make it out to be.
i was almost bought a motor like yours except it was a 750 kz, but i didnt buy it because it was shaft driven. i have no idea how i would set it up like you did. any tips on how you did it? i saw your pics and looks like you set it up to be chain driven...
@nitrostreet thanks for the fast response! i am currently working on a dazon raider 150cc the motor doesn't work. i want to put a bigger motor into it. i want to keep up with a raptor 700 in the sand. how big of a motor should i put into it? is 1100cc to big or should i go with a 750 and is there any major adjustments i have to go through?
@gringo406 I would go with as big as you can afford, a street bike motor won't have as much torque as a motor built for offroad so you want as many cubes as possible to make up for it in the bottom end, but once you get moving watch out!!
Mine needed even a little lower gear than I ended up with to help with bottom end, but it didn't have any problem running from 30 mph to 90 mph
@nitrostreet wow thanks for that info, man. nobody really responds to any information like that, but you did so i am definitely happy about that. im gonna go big now that you recommend it your webpage rocks! i really like the detailed photos you put up it helps a lot!
@MrJcb1135 There's some thumb pictures of that on my site that you can click on and open up, I used a linkage cable like an automotive parachute release cable, I can't remember where I got it from
I'm sure, there's not much "kit" about 8 sticks of 1" by .090" wall HREW tubing 20' long, and a tubing bender.
The build is on my site along with the '57 Chevy that I built.......and the 350 Tuned Port RWD Z-24 that I built......and the '29Chevy street rod project (Blown & injected) that I'm currently building......
how much did this cost to bulid
Pauliebuck 4 hours ago
can we get more video of you putting around? Jk nice build though man!
mrmekone 3 days ago
@mrmekone I wish I had some action shots but when I took those in the early 2000's I didn't even know what YouTube was....
nitrostreet 2 days ago
@nitrostreet Still a nice video just giving you some crap. . Did you engineer the frame yourself or use a blueprint? I've always wanted to build one.
mrmekone 2 days ago
@mrmekone I built and designed the frame as I went, it wasn't super hard after my drag cars
nitrostreet 2 days ago
What main jets are you running in those Mikuni carbs???
viggoM35 3 weeks ago
The response to the letters on the image was not correct, please try again.
Gane962 3 weeks ago
dope!
big420head 1 month ago
Nice looking buggy - you should check us out BuggyCountry . com
BuggyCountry 5 months ago
How do you install a clutch pedal and shifter to change gears
MrTechnoSavvy15 5 months ago
@MrTechnoSavvy15 easy. a link bar for the shifter. cause gear seleciton only happens in 2 directions. noramlly up and down. but you cna rotate it so its forward and back too. and clutch is via cable so that can be done as ell
yamahonkawazuki 4 months ago
WOW! Simply inspirational. That's a killer build which looks very solid but powerful! thanks for the encouragement through your project!
ficusnipe 5 months ago
Man you did an awsome job.
svberry 7 months ago
is it needed to have gears if your building a go kart that will go good on short grass and up to 30kmh?
cacneaunit6 7 months ago
Nice work, very clean.
EloyBestwanger 7 months ago
bad ass man bad ass
Jaymoto09 9 months ago
You should build more and sell them, here in the country in N.C. you could sell alot of them. BTW, very nice job !!
surrynet 9 months ago
?????????????????? video 2 onde ???
spindlerkart 9 months ago
ur lucky u didnt flip it. u almost did in one part
adinrulez12345 10 months ago
Awesome cart and song.
PanikingCamel 10 months ago
Nice build this.
Wish you had off made more videos through the build stages..
piddydog 11 months ago
@piddydog I wish so, too, but back when I shot those videos no one had heard of You Tube. After I sold it I had to go through the few videos I had shot to make this video, and it really doesn't do this cart justice, it was a lot wilder than these make it out to be.
nitrostreet 11 months ago
Very impressive sir!
ka24det28 11 months ago
right now i'm buliding a go kart pedal for now but when i get some money it will have engine
Gomez12345100 11 months ago
@Gomez12345100 i'm only 13
Gomez12345100 11 months ago
that is totally awsome ! nice work
SuperLongboard10 1 year ago
nice.
alex29215 1 year ago
Awsome!
Ryason916 1 year ago
i was almost bought a motor like yours except it was a 750 kz, but i didnt buy it because it was shaft driven. i have no idea how i would set it up like you did. any tips on how you did it? i saw your pics and looks like you set it up to be chain driven...
gringo406 1 year ago
nice
ourtube4u 1 year ago
how much did u sell it for?
gringo406 1 year ago
@gringo406 I got $4500 out of it which wasn't to bad; I spent 2 grand building it.
nitrostreet 1 year ago
@nitrostreet thanks for the fast response! i am currently working on a dazon raider 150cc the motor doesn't work. i want to put a bigger motor into it. i want to keep up with a raptor 700 in the sand. how big of a motor should i put into it? is 1100cc to big or should i go with a 750 and is there any major adjustments i have to go through?
gringo406 1 year ago
@gringo406 I would go with as big as you can afford, a street bike motor won't have as much torque as a motor built for offroad so you want as many cubes as possible to make up for it in the bottom end, but once you get moving watch out!!
Mine needed even a little lower gear than I ended up with to help with bottom end, but it didn't have any problem running from 30 mph to 90 mph
nitrostreet 1 year ago
@nitrostreet wow thanks for that info, man. nobody really responds to any information like that, but you did so i am definitely happy about that. im gonna go big now that you recommend it your webpage rocks! i really like the detailed photos you put up it helps a lot!
gringo406 1 year ago
This has been flagged as spam show
@gringo406 im 12 and 6ft9
best496 1 year ago
that thing is slow
TheSPK23 1 year ago
is that a subaru motor?
bindl95 1 year ago
@bindl95
Not quite (Hint: read the title)
nitrostreet 1 year ago 5
@bindl95 if you watch the whole video through you willl find out lmao what a spak
kevin4vicki 1 year ago
Will that do a burnout on-road?
44CONMANJ 1 year ago
how did you connect the gearbox to the lever past the swing arm
MrJcb1135 1 year ago
@MrJcb1135 There's some thumb pictures of that on my site that you can click on and open up, I used a linkage cable like an automotive parachute release cable, I can't remember where I got it from
nitrostreet 1 year ago
what song is this
DOLORESTHEDINO 1 year ago
@DOLORESTHEDINO Prodigy - Firestarter
insanebkr 1 year ago
race davesfarm >:D
www7598wr2 1 year ago
Cool! Race this against Davidsfarm gokart :)
walterbrunswick 1 year ago
that is sick where did you get the design from
pantshang 1 year ago
Very nice!
Csmaster12 1 year ago
cooool
GodfatherMaxi 1 year ago
dude get a life!
highocrack123 1 year ago
@highocrack123
Dude look at your videos
nitrostreet 1 year ago 3
that is truly amassing really freakin cool :D
quickfernando69 1 year ago
thats the best one i have see.nice job.
vjfronk 1 year ago
Looks fun as hell, nice work man... you put alot of sweat and blood into that baby. Very clean.
Z0hann 2 years ago
very nice....very clean
1968hambone 2 years ago
the blue one is just what i want to build.
matthewmarrs123 2 years ago
you sure that didn't come in a kit and you put it together yourself at home...
or did you draft the entire frame with the systems...
poonfestian 2 years ago
I'm sure, there's not much "kit" about 8 sticks of 1" by .090" wall HREW tubing 20' long, and a tubing bender.
The build is on my site along with the '57 Chevy that I built.......and the 350 Tuned Port RWD Z-24 that I built......and the '29Chevy street rod project (Blown & injected) that I'm currently building......
nitrostreet 2 years ago
sounds kinda like an impreza
rookiey65 2 years ago
sounds bad ass
DiSwHiTeBoY2KrAzY 2 years ago
KEWL!!!!!!!!!
24evanwilson 2 years ago