nice; I love how at about 2:30 you tore the bumper off lol that was just awesome. Would've loved to see you ramp off those cars lol good job though! :D
Oddly enough it broke that day but not because of the reasons you think. I went by what I was told and put that front end in my rig. I was told it was a 373. it was actually a 273.... the last bit was me limping away with a broken front axle.... I broke the ujoint and messed both stubs....
@kitimatdude If u broke 1 ujoint how the hell u mess up both stub shafts?my 87 chevy pick up broke the drivers u join and killed both drivers side shafts but i dont get wut ure sayin
at that time I just built the truck and had only ran it on snow. What I didn't know was the front diferential had the wrong gear ratio in it. I was told it was a 373 it was in fact a 273. It was way off. I broke a front axle at the end. If you like this one I have a newer video of car crushing from this year. same truck but better set up.
i wonder if my truck could do that. we have junk cars and stuff too. I drive a 1981 gmc half ton, 350, 4speed, np 205, 4 inch lift, 35 inch tires. its awesome and loud
HIT IT FROM THE SIDE!!!!
planecommander1 7 months ago
that is cool man see it proves chevy is better!
cena5681345 1 year ago
nice job man!
it's a heck of a lot of dun. that's actually the first thing I did when I got my lift and 42's done was find some cars to go over haha
budgreen4x4 1 year ago
NO SONG NEX TIME.
newcaramrod 1 year ago
this is what i do in the chi
TheIGSDw 1 year ago
fucking awsome blazer!
sloppyjoefingle 2 years ago
nice; I love how at about 2:30 you tore the bumper off lol that was just awesome. Would've loved to see you ramp off those cars lol good job though! :D
HelloDrBob 2 years ago
you lt that little car kick your ass
gummmmmbycorey1 2 years ago
That was a hell of a try man. I got a 87 blazer runnin on 44's with a 12 in lift and I've made over a bunch of cars. Still awesome.
UwharrieMan 2 years ago
You should put up the video and link it here. I did it again in 07 and 08.
kitimatdude 2 years ago
I would but the videos I got aint digital and I aint got the stuff to convert it.
UwharrieMan 2 years ago
surprised the front axle held up to the first hit dead stopped, anyways NICE!!!!!
walyll0 2 years ago
Oddly enough it broke that day but not because of the reasons you think. I went by what I was told and put that front end in my rig. I was told it was a 373. it was actually a 273.... the last bit was me limping away with a broken front axle.... I broke the ujoint and messed both stubs....
kitimatdude 2 years ago
@kitimatdude If u broke 1 ujoint how the hell u mess up both stub shafts?my 87 chevy pick up broke the drivers u join and killed both drivers side shafts but i dont get wut ure sayin
John87454 7 months ago
You get a A for effort!
quiksilvermanblue 3 years ago
dang,, what we gonna do 15 years from now? these new cars nowadays wont stand up to this kind of treatment
Dreambro1 3 years ago 9
Bwahaha! That is my favorite comment so far!
kitimatdude 3 years ago
was waiting for some old lady to come out and say no that was my car??!!!! that would have been totally funny for them to play a prank on you
dunn98632 3 years ago 2
oddly enough the blue car was my ole ladys ;)
I got her a better car before this.
kitimatdude 3 years ago
What set up do you have? (i.e. motor, trans, axle, ect.)
Bmitch84 3 years ago
This is from 06. back then it was...
350/sm465/205/10 bolt-411/41ff-411
now its....
454/th400/203/205/d60-410 detroit/14ff-411-govloc
kitimatdude 3 years ago
I always wanted to do that to my neighbors cars. Hmmmm
GKZ28 3 years ago
red necks :D
andrewjohngordon 3 years ago 2
what do ya do when your bored? run shit over. looks fun.
Xx69roadrunnerxX 3 years ago 3
how much power did that have?
initbludz 3 years ago
not much, stock 350...
kitimatdude 3 years ago
That's one hell of a motor Chevy made... those 350s kick arse!!!
EagleEyedRanger 3 years ago 2
It's a little more challenging with a Nissan D21. Too bad I don't have a video of doing it. Kick ass video by the way.
HeavyGhost 4 years ago
it is from 06... old news...
kitimatdude 4 years ago
what kinda lift and tires you got there, im looking to lift mine and tires when i get the money, so what you got
macman216 3 years ago
looks like 44s and about 10 inches of lift.
nosman69 2 years ago
yes very close to that
kitimatdude 2 years ago
I only knew cuz I just got a 76 Blazer on 44s with 6 inch susp. lift and 6 inch body lift
nosman69 2 years ago
that looks fun
andywellsey 4 years ago
I think the "proper" way of doing it, is to approach the car slowly, then like 1ft before, gas it to pop the front up, and not break any tie rods.
DuraToTheMaxxx 4 years ago
no tie rods were hurt that day...
kitimatdude 4 years ago
Good :) And cool truck btw
savagedude 4 years ago
are those cars junk?
smartestinUSA 4 years ago
all junk...
kitimatdude 4 years ago
beautiful!!! i Loved it!!
fuffilu 4 years ago
put a hard object (ramp-like) in front of the cars to give you truck a 2-foot lift, that would give your truck the ability to go over the cars
Kissfreak180 4 years ago
its not supposed to be easy
kitimatdude 4 years ago
lol i could imagine if you got into an accedent
catch like 16 feet of air
KXrhyder547 4 years ago
What's the song?
antharro 4 years ago
artist: Andrew W.K.
album: I Get Wet
song: Party Hard
kitimatdude 4 years ago
Excellent, thanks. Good vid, too, would love a go at that! :-)
antharro 4 years ago
foot to the floor ,
KellyDobson 4 years ago
LMFAO!!! i gotta get in on that!!! fukin sick man
Z28nander 4 years ago
i would give u 5 stars rate if u get fully over from front to back or back to front of car, not half.. good job :)
InUsaWeTrust 4 years ago
at that time I just built the truck and had only ran it on snow. What I didn't know was the front diferential had the wrong gear ratio in it. I was told it was a 373 it was in fact a 273. It was way off. I broke a front axle at the end. If you like this one I have a newer video of car crushing from this year. same truck but better set up.
kitimatdude 4 years ago
exactly.
qwertylockley 4 years ago
is that thing an automatic?
JDT738126 4 years ago
at that time it was a standard with a 350. now it is a 454 with automatic... and new tires
kitimatdude 4 years ago
i wonder if my truck could do that. we have junk cars and stuff too. I drive a 1981 gmc half ton, 350, 4speed, np 205, 4 inch lift, 35 inch tires. its awesome and loud
porkchop70 4 years ago
I have heard of it bieng done with 35s. an old friend of mine did it in the 80s.
kitimatdude 4 years ago
NICE!!
jordan0492 4 years ago
what kind of job does this?
SARINFO 4 years ago
i dont understand the question..
kitimatdude 4 years ago
I mean is this a job or doing it for the fun?
SARINFO 4 years ago
I do it for fun and to see if my truck will do it. I had a few scrap cars lying around...
kitimatdude 4 years ago
really are you allowed to go and crush cars at a scrap yard just for fun
SARINFO 4 years ago
you are if its your own scrapyard...
kitimatdude 4 years ago
you own a scrapyard wow cool
SARINFO 4 years ago
well yes and no, I had scrap cars at my shop. but its not exactly a scrapyard.
kitimatdude 4 years ago
SWEET!
jordan0492 4 years ago
nice vid man
hulluhomer2 4 years ago
that is actually how monster trucks began, nice video.
alicecoop9009 4 years ago
thanks!
kitimatdude 4 years ago
BLAZER POWER!!! ive tried tht with my 87 K5 but mine aint tht big but mine will be big as this some day
coecoebutter 4 years ago
And that kids, is how bigfoot was born
drumteen 4 years ago
you might be right, everything is bigger and better this year. I have a couple scrapped cars lined up... hmmmm....
kitimatdude 4 years ago
lmfao @ the guy laffing at 10-15- sec in .loloololo
peejaa 5 years ago
uhh wait wait!! let me guess, 42's, 8" lift, 3" body, dana 60 in front corp.14 in the back with a 400?? nice vid!!
rinolope 5 years ago
close kinda... 44s 4" spring lift, 8" body lift, at that time dana 44, corp 14 in rear tho, and a nice 350
kitimatdude 5 years ago
haha badass!
EnZo745 5 years ago