do u set the timin the same as th 12v because isnt a diffrenet crank in the 24, will a 24v head bolt straight up to a 96, i would like to have the best of both worlds
Nope timing is exactly the same mine is at 24*. A 24 head can be made to work on a 12v but you would have to change pistons. On a 12v head the injectors come in at an angle from the side but on a 24v head they are cantered directley over the piston so the pistons have a completley different bowl design.
thats alot of timing mine set at 16, what type of dvs do u have, i have dynamite diesel compition and there 90 horse injectors, 4k springs100 fuel plate on my 96 5spd, i need more air flow my phat shaft 62 is haven a hard time keepen up
You have to take into the account the 24v piston has bigger piston bowls and is centered into the cylinder though. Plus 191 DV's, .093" lines and tubes all lower timing. On a 24v with a P-pump and SO pistons you can get up to about 26* before you are even close to coming out of the bowl. I run a 4k GSK and no plate with AFC FF. It is a descent setup but it is getting a 913pump, bigger injectors and more turbo soon.
Yeah I remember watching yours and thinking how nice it would be. I wish I would have had more help I pretty much did everything but start the truck for that vid all by myself. I definetley think I could do another in a weekend with all the parts though.
do u set the timin the same as th 12v because isnt a diffrenet crank in the 24, will a 24v head bolt straight up to a 96, i would like to have the best of both worlds
imcumminscrazy 2 years ago
Nope timing is exactly the same mine is at 24*. A 24 head can be made to work on a 12v but you would have to change pistons. On a 12v head the injectors come in at an angle from the side but on a 24v head they are cantered directley over the piston so the pistons have a completley different bowl design.
2141pete 2 years ago
thats alot of timing mine set at 16, what type of dvs do u have, i have dynamite diesel compition and there 90 horse injectors, 4k springs100 fuel plate on my 96 5spd, i need more air flow my phat shaft 62 is haven a hard time keepen up
imcumminscrazy 2 years ago
You have to take into the account the 24v piston has bigger piston bowls and is centered into the cylinder though. Plus 191 DV's, .093" lines and tubes all lower timing. On a 24v with a P-pump and SO pistons you can get up to about 26* before you are even close to coming out of the bowl. I run a 4k GSK and no plate with AFC FF. It is a descent setup but it is getting a 913pump, bigger injectors and more turbo soon.
2141pete 2 years ago
Lookin good Pete. Glad it's up and running.
Ryan
dieselpower85 2 years ago
Thanks Ryan, hopefully it is getting a built 913 pump soon.
2141pete 2 years ago
sounds good, see its not that hard. once you get it tuned to run/drive well you will wonder why you waited so long
maddawg0517 2 years ago
Yeah I remember watching yours and thinking how nice it would be. I wish I would have had more help I pretty much did everything but start the truck for that vid all by myself. I definetley think I could do another in a weekend with all the parts though.
2141pete 2 years ago