so the two slots are ram slots! ha i knew it... (such a noob response) also whats a way I can ground myself? gonna do a cpu cooling system change in like two days thanks for the help =)
if you are using intel 8 gb ram sucks because you cant triple channel and that will suck unless you are using amd and using dual channel your are fine
0:48 the most important part of this tutorial is missing: how can i connect the processor into the motherboard? i knew lots of people having problems with this issue... :/
cpu and heatsink was already on? Screw supporters on mobo were already on etc.. Do it from start, each piece by piece. My shortest time is 1hour, I'm 14, I also do cable management in it which adds on so much time and that was my first build, my second took longer due to cable management that I like to do.
The wrist strap is only a safety precaution not necessary but because i have done this more than a hundred times im just not that cautious but it is recommended and if you dont have a anti-static wrist strap make sure you are grounded
lol, its so fast cuz he didnt do properly and he had stuff already set up. the mobo usualy requires more screws. he had the processor and heatsink already put on. psu usualy needs 4 screws. the snap ons also help alot with time, screwing the HDD and the optical drive in can take longer. also, just a personal opinion, but id buy like, half the RAM and spend more to get a nicer video card :D sweet water cooling set ups tho
I wish I could set up a pc in 10 minutes, but it takes me at least an hour because i do insane wire management, it bugs but me i absolutely hate having a nest of wires laying about the case
Just a bit of advise for your next comp that you build someday: IDE hard drives are much slower at sending information than SATA hard drives, and SATA hard drives can hold much more space, (500 gigs, for 50$, and 1000 gigs, for about 70$, etc), and they are also a lot more fast.
@ballader1 What the Fuck??? Where's your Video?? Opps! I don't see anything cause you don't have a fucking camera. Tell your mommy to buy you one!. Back off Bad kid, Im sure your rocking a Pentium 2 Dinosaur with a 6 GB hard drive. So stop hating faggot.
@SHADOWandSABIN You don't have to believe me you know PS I am getting a camera next month and I might make a video about it just because you are fucking annoying
if you do it in 3 minutes you're probably not being careful enough, also take note that he is explaining how he is doing everything, which will also slow him down.
@gitaarspeel both true, I made it in 3 minutes, but I wasn't that careful, so I had only a 30% change of doing it and I understand that explaining things slows you down
@ballader1 10 minutes is too long man! , I setted up my own in 3 minutes with 3 Ghz Intel Processor, 4 GB of Ram and ------->Windows 7<----- and much more... if you meant the building part then dont include windows 7
I know that the motherboard has specific holes to screw into the case. Are the holes in the exact same place for all motherboards? And do all cases fit all motherboards?
awesome video man. those ram sticks are sweet. your vid really helped me out, i´m still kinda confused with how to connect the secondary fans. i also like the choice of music :P
hello how can u buiid a computer in 10 minutes its impossible becaue i know someone whos building a computer and it takes more than 1 day already and how can u know where all wires go where number for where wires go?
@deafmom7499 im not gonna spend my time explaining to you how it "is" possible to build a computer in 10 minutes because your looking at the damn proof!
This is an awful example of putting together a PC... Doesn't ground himself and just goes ahead and gets his finger oils all over the contacts on the RAM.... And everything is done from one side.. he didn't even make an attempt to manage cables..
@leon777leon Unless you are statically charged.... Then you would fry the RAM and the oil on your fingers over time can damage the RAM... And unless your case is not painted bare metal in fact no you aren't grounded however if you can remain in contact with maybe the chassis or the power supply the entire time then you are safe... otherwise everything you just said is n00b bullshit... I can't believe you'd reply like that to something someone else already confirmed in the post before!
@ooblik I work with GCHQ my job is to make sure pcs and servers work properly and i am always take them apart and putt them back togther. So stfu i know what im on about its my job and my hobbie. So before you reply to this calling me a noob go do your research then get a job that involes you doing this 12 hours a day and die in a fire :)
@ooblik Im a lazy typer when i get home and cant be fucked to go over everything. Um no its not in my country we do a 12 hour shift and have a nap for a bit of it and we take it in turns. Go look up my job you ass before you reply agian.
@leon777leon Typing has nothing to do with it. And governments pay people all the time for doing a crap job. They also switch out their systems often enough for anything like that to go unnoticed. A shitty job unnoticed is still a shitty job...
jesus 1666mhz 8gb of it lmao XD and you only use a shitty geforce 9600 you have 2 pci 16 slots too so much potential i hope you sli or crossfire some cards :) nice video
nice setup you got there, AND BTW GREAT MUSIC, god some people never have anything else better to do than complain, well done for setting it up in 10mins thats hell fast i set mine up in around 20mins if i have all the right gear with me.
Can you tell me how much this cost all together?
oID4NIoHD 1 month ago
You slowed down the time bro
Sandi315Productions 1 month ago
way to slow down the clock you derphead, go eat a bag of dicks.
theryan96 2 months ago
lol 200 gig hard drive
kh2752 2 months ago
So the CPU was already in the motherboard? Lol
thatsux0rz 2 months ago
can u tell me how much for this all componen?
85rayn 4 months ago
Comment removed
UniverseOffspring 4 months ago
I don't believe you. It can't have taken only ten minutes to get those parts xD
frederik027 4 months ago
haha lol
maddymortimer 5 days ago
can it run notepad?
faris5578 4 months ago
actually, a 2TB drive would be better.
themine1122 4 months ago
@themine1122 this was 2009... i dont think even 1 tb existed then?
EmmetVG 4 months ago
bah... the processor3 is pre installed!
Hogaboga101 5 months ago
@Hogaboga101 Lol, I was thinking the same! xD
MyWonderApple 4 months ago
how much was it?
jamese888 5 months ago
for how much you built a computer like that one??
lllBoRUSSlll 5 months ago
you might do it in 10 minutes but i like to take my time :)
tibothenr 5 months ago
you might do it in 10 mins but i like to take my time :)
tibothenr 5 months ago
ok ti was more than 10 mion cuz the cpu and the cpu fan was already on your nmotherboard
588skywalker 5 months ago
How about putting all the main-board screws in you only show one......... ive built loads of pc,s including the one im using now
rocky5554 5 months ago
Comment removed
rocky5554 5 months ago
so the two slots are ram slots! ha i knew it... (such a noob response) also whats a way I can ground myself? gonna do a cpu cooling system change in like two days thanks for the help =)
dnamick17 5 months ago
@dnamick17 touch the ground? DERP as in solid floor
XxmabezxX 5 months ago
Nice clock its about 50% slower than a REAL clock faggot.
halo3sn1p3r 6 months ago
MUTE!
Zesicon 6 months ago
@DarkThunder1999 Just saying that it isent that hard and stop acting big, your only 12.
TheFixxi 6 months ago
Third time i buildt a computer i took me 21 minutes and it was a shitty one. btw im 15 :P
TheFixxi 6 months ago
Just because you randomly point at something and do gestures doesn't make it a "how to"
Vickust 7 months ago
3:00 -fan pointing to inside of case.
I seriously hope you guys don't do this.
fargoman27 8 months ago
Respond to this video... why is the RAM covered in a white plastic.is it like heat-sync?
DarkFireMario100001 8 months ago
Wait you are cheating you have pre-installed the CPU and CPU Fan so it isn´t 10 minutes xD
FredChangcz 9 months ago
if you are using intel 8 gb ram sucks because you cant triple channel and that will suck unless you are using amd and using dual channel your are fine
canadian0FDooM 9 months ago
@canadian0FDooM if you got i7 you have support for triple chanel
TheJennetteFan 9 months ago
0:48 the most important part of this tutorial is missing: how can i connect the processor into the motherboard? i knew lots of people having problems with this issue... :/
nitturo 9 months ago
how about the airflow?
damn606 10 months ago
Easier than putting a lego set together!
13ouncer 10 months ago
why do you need a 700w psu? how many watts does that graphics card need?
doodoodoo7 11 months ago
fucking cheater. the clock is slowed down.
willeyboy2 11 months ago
you cheated you had the cpu alreddy on the board when it went in
danieldunican 1 year ago
@danieldunican Plus the fan was already mounted on it.
herolief 11 months ago
@danieldunican also all the expansion covers were removed
herolief 11 months ago
Good job! But cable management is horrible.
dpate 1 year ago
Pretty sure the clock on the video is a little slow.
Huntereich 1 year ago
ide suxx!
computerhelpman97 1 year ago
@computerhelpman97 lol ide is better than sata
316308 1 year ago
@316308 why??
computerhelpman97 1 year ago
@computerhelpman97 ide is more reliable.. u have less of a chance losing data on ide and ide hdd last longer
316308 1 year ago
@316308 ide is much more loud
computerhelpman97 1 year ago
@computerhelpman97 IDE Cable looks cooler
K1NGD0MDOWN 1 year ago
HDD : Western Digital Caviar Green 2000GB, 64MB Cache, SATA II ~ 80 euros
Atx Tower
Need a regular cheap dvd drive someone can help me?? and prize??
VideoArtz1 1 year ago
Hey i got this build im i missing something? Pls help me
CPU : Intel Core i7 2600 PC1155 8MB Cache 3,4GHz retail - this is the newest available, Sandy Bridge ~ 267 euros
CPU cooling : Scythe Mugen 2 Rev b. : ~ 50 euros
Motherboard : Gigabyte GA-H67MA-UD2H, H67 ~ 122 euros
Graphics card : Zotac GeForce GTX 460 AMP! Edition, 1024MB GDDR5, 2x DVI, ~ 200 euros
Ram : Kingston HyperX T1 DIMM XMP Kit 8GB PC3-12800U CL9-9-9-27 ~ 100 euros
The rest comes after this comment
VideoArtz1 1 year ago
thanks you helped me with some multiple problems =) awesome video..
OpiumWarz 1 year ago
I built my first computer in 2 hours.
KirbyPwnz13 1 year ago
This has been flagged as spam show
2 hours for losers like you but 10 minutes for me
overdrawnlugo 1 year ago
I need only 3 minutes to build it.
trabantandcsfan 7 months ago
@trabantandcsfan lol me too
ThDComputer 7 months ago
@overdrawnlugo 10 minutes for people who have no lifes building PC's their whole life and 10 minutes for normal people.
FEENPC 5 months ago
-research dimensions and specifications of parts
-unbox and layout all the parts, -plan your build precisely
-apply paste and drop in the motherboard&cpu into case
-throw in graphic card, -optic drives, -hard drives, -psu, -cable management
done in 10min :)
now onto windows... takes 2 hours at max to complete
bmw2go11 1 year ago
I like how you have a case with a window, but left all the cables hanging around. lol
Selfesteembear 1 year ago
Yuck, IDE for the HDD.
TickleMeSillyXx 1 year ago
cpu and heatsink was already on? Screw supporters on mobo were already on etc.. Do it from start, each piece by piece. My shortest time is 1hour, I'm 14, I also do cable management in it which adds on so much time and that was my first build, my second took longer due to cable management that I like to do.
Avataryoutuification 1 year ago
The wrist strap is only a safety precaution not necessary but because i have done this more than a hundred times im just not that cautious but it is recommended and if you dont have a anti-static wrist strap make sure you are grounded
overdrawnlugo 1 year ago
@overdrawnlugo how much did it cost all together ??
DarkAAProductions 3 months ago
That's pretty fast. I'm about to build my first, I predict I'll spend about 1 hour. Just curious; why did you not use an anti-static wrist strap?
lockedine 1 year ago
dude were u get that ram? and i recomend you get a anti static braclet
macoronicheez 1 year ago
You fail at handling hardware dude. You touched all the things you shouldn't touch!
SmallGuy170 1 year ago
In less than 10 mins dude we watched the video then made it put 30 mins...
MPGAM3R 1 year ago
How the sagitta case like with dust?
AusTechGeek 1 year ago
Nice computer. To bad it's let down by Windoze Vista
clankm 1 year ago
are u using sata for ur harddrives
trickmytruck32 1 year ago
you missed out 2 hours of cable management
Splooshiba 1 year ago
...I wish i could do that!
drblaze2 1 year ago
so mobo and cpu were already connected together ? ;)
charlieshiiin 1 year ago
WTF where u buy 8gb RAM!?!?!?! give me one
19atiq98 1 year ago
@19atiq98 many Motherboards today has 4 ports to ram-sticks , just put 4gb ram*2
linden1177 1 year ago
@19atiq98 its 4 x 2gb of ram
jellymnbvcxz 1 year ago
Nice man, hopefully this will work :)
WFTNelliel 1 year ago
@MinttyDizzy Yes everything is compatible but I recommend getting a 1.5 tb hardrive because 500 gb is no that much anymore
macandpctips111 1 year ago
cheater processor was already in there lol
canadiancanable 1 year ago
You had the CPU/Heatsink installed and the standoffs in place. It took you longer.
GruntyStudios 1 year ago
dont want to complain, but you already had the cpu on the mobo, which takes a considerable amount of time to put on
greendaygigi1 1 year ago
Repetitive song is annoying as fuck lol.
omgmyuserwasdisabled 1 year ago
Wow! im very impressed with your awesome cable management skills! good job!
TheGreekRob 1 year ago
hellen keller wire management? but nice computer man.
RSFOFOnator 1 year ago
but.....you already put the cpu in...that doesnt count....
brett1234 1 year ago
lol, its so fast cuz he didnt do properly and he had stuff already set up. the mobo usualy requires more screws. he had the processor and heatsink already put on. psu usualy needs 4 screws. the snap ons also help alot with time, screwing the HDD and the optical drive in can take longer. also, just a personal opinion, but id buy like, half the RAM and spend more to get a nicer video card :D sweet water cooling set ups tho
dandil 1 year ago
an ide cable why???
why nott a sata drive
masik7290 1 year ago
How to spend $2,000 in 10 minutes
TCSMProductions 1 year ago
srry but please do some cable management :D
basbas63 1 year ago
@basbas63 impossible to do in 10 mins, good cable management can take up to 3 hours
thehostler 1 year ago
@thehostler i know but it is part of building a pc
basbas63 1 year ago
@basbas63 true
thehostler 1 year ago
nice build an hell fast! i can't do it that fast maybe 20 min but no way i can do it in 10 mins
basbas63 1 year ago
damn it gets pretty cluttered in there huh?
killernanny4315 1 year ago
looks alright except for not getting a sata hdd.
chrisalamp 1 year ago
@chrisalamp not everyone cares about really fast loading times there are some peapol who also care a lot about the price
basbas63 1 year ago
i got a PNY 9600 OC edition and its sucks tbh :/ (thats in my 2nd gaming pc)
in my real pc i have a XFX 4870 and it kicks ass :D carnt wait to get my new case (CM storm scout with Blue + Red neons) :D:D:D:D
donkeyboy2k7 1 year ago
I wish I could set up a pc in 10 minutes, but it takes me at least an hour because i do insane wire management, it bugs but me i absolutely hate having a nest of wires laying about the case
Turbofiero100 1 year ago
that's a small hard drive capacity...
AlongTheHorizonLine 1 year ago
Good job man
headshots12345 1 year ago
Shi*! thats a monster!! amazing PC you've got!!
eemran007 1 year ago
dude. this is so stupid. ur not actually building it. ur just puting what was built together.
PacManPark 1 year ago
cable management?
PCTechTalks 1 year ago
Just a bit of advise for your next comp that you build someday: IDE hard drives are much slower at sending information than SATA hard drives, and SATA hard drives can hold much more space, (500 gigs, for 50$, and 1000 gigs, for about 70$, etc), and they are also a lot more fast.
Manifest222 1 year ago
this video was really intresting. also
step 1. take a shotgun outside
step 2. shoot that fucking annoying-ass bird
fartmonkey200 1 year ago
Ur ryt, they're just jealous coz they can't do it.. All they Can do is all talking.
Antikaku99 1 year ago
10 minutes is too long man! , I setted up my own in 3 minutes with 3 Ghz Intel Processor, 4 GB of Ram and Windows 7 and much more....
ballader1 1 year ago
@ballader1 ok then stupid where is your video dumb ass one thing is to say it and another thing is to do it ,so do it first then talk ass whipe!
overdrawnlugo 1 year ago
@overdrawnlugo Man, I don't have a camera to record. PS You don't have to believe me, do whatever you want, but I am telling you the truth
ballader1 1 year ago
@overdrawnlugo Not bad at all dude! soo...how much would I spend to build a BEAST computer?...like Alienware kick-ass computer...?
leomitz 1 year ago
@overdrawnlugo i done mine in 10 mins 1 sec lol u beat me! :(
allibowthepilot 1 year ago
@overdrawnlugo pretty fast i can build in about an hour
alanpae81 1 year ago
@overdrawnlugo I don't believe him... 3 minutes? My butt.
Avataryoutuification 1 year ago
@overdrawnlugo ooooooooooohhh SNAP!!!!!!!!!!!
Animanga04 1 year ago
@overdrawnlugo ur an angry little man
rhodes1986 1 year ago
@ballader1 way to slow i did mine in 3.25643765 seconds with 12 Ghz 20 gb ram and windows 7 pro so suck on that =]
brandon9491 1 year ago
@brandon9491 cool
ballader1 1 year ago
@brandon9491 probably fake
ballader1 1 year ago
@ballader1 yea... so lol
brandon9491 1 year ago
@brandon9491 it takes 2 minutes only to get done with the screws lol
ballader1 1 year ago
@ballader1 What the Fuck??? Where's your Video?? Opps! I don't see anything cause you don't have a fucking camera. Tell your mommy to buy you one!. Back off Bad kid, Im sure your rocking a Pentium 2 Dinosaur with a 6 GB hard drive. So stop hating faggot.
SHADOWandSABIN 1 year ago
@SHADOWandSABIN You don't have to believe me you know PS I am getting a camera next month and I might make a video about it just because you are fucking annoying
ballader1 1 year ago
@ballader1 dude, thats a weak computer...
kakia999 1 year ago
@kakia999 well, I can't put more ram in 32-bit os, more than 3ghz intel processors are too expensive (at least at the store that I buy them)
ballader1 1 year ago
@ballader1
if you do it in 3 minutes you're probably not being careful enough, also take note that he is explaining how he is doing everything, which will also slow him down.
gitaarspeel 1 year ago
@gitaarspeel both true, I made it in 3 minutes, but I wasn't that careful, so I had only a 30% change of doing it and I understand that explaining things slows you down
ballader1 1 year ago
@ballader1 Trololol. He uses good punctuation and capitalization I'll give him that but really, "I setted up my own in 3 minutes"
Facepalmed.
TheOnlyRealUsername 1 year ago
@TheOnlyRealUsername His punctuation is shit, what are you smoking son?
WTCHME 1 year ago
@ballader1 i seriously doubt that. you didnt even use "set" in the right tense. "setted" is not a word
motosportjunkie 1 year ago
@motosportjunkie try to type a comment in 3 AM while all the day you were working and you will do lot's of mistakes :P
ballader1 1 year ago
@ballader1 thats impossible.. Windows 7 takes longer then 3 minutes to install.. fucking idiot!
killersullo 1 year ago
@killersullo man, why people are so stupid these days??? I mean only the bulding part, not installing windows!, windows takes a lot to install LOL
ballader1 1 year ago
This has been flagged as spam show
@ballader1 10 minutes is too long man! , I setted up my own in 3 minutes with 3 Ghz Intel Processor, 4 GB of Ram and ------->Windows 7<----- and much more... if you meant the building part then dont include windows 7
killersullo 1 year ago
@ballader1 i woudent set it up so fast you might make a mistake...........=D
MrDbro 1 year ago
@MrDbro i took the change
ballader1 1 year ago
@ballader1 Windows 7 will need more then 3 minutes
FullSaFaK 1 year ago
@FullSaFaK you should see the comments below, I mean only the building part, I don't count the windows installation time.
ballader1 1 year ago
@ballader1
if i spent the kind of money he did on a computer like that. I would of taken my time. No reason to rush. 10 minutes is perfect lol.
InsanityRewritten 1 year ago
@ballader1 yea and you also built all the parts of scratch as well as codded 7 that fast, 7 takes atleast 3 hours to install ya piece of shit lier.
SteezyJerksEnt 1 year ago
Thats a really nice computer
and you made it in 10 mins, Thats crazy
I wish I could that
The final product looks sick
I think that you could've probably done it even faster it you didn't have to explain what you were doin.
510prodz 1 year ago
hmm i need to upgrade my ram only 4gb.....
Gr00wd 1 year ago
I love the music! I have a question though,
I know that the motherboard has specific holes to screw into the case. Are the holes in the exact same place for all motherboards? And do all cases fit all motherboards?
Great video!!! Liked!!
bygmikeee 1 year ago
awesome video man. those ram sticks are sweet. your vid really helped me out, i´m still kinda confused with how to connect the secondary fans. i also like the choice of music :P
keep it up, thnx for sharing
captRhay 1 year ago
nice parts but... why the 9600gt? there is many more better gpus
Blade4613 1 year ago
i go to best buy every day to check my email
mrkidd1 1 year ago
hello how can u buiid a computer in 10 minutes its impossible becaue i know someone whos building a computer and it takes more than 1 day already and how can u know where all wires go where number for where wires go?
deafmom7499 1 year ago
@deafmom7499 im not gonna spend my time explaining to you how it "is" possible to build a computer in 10 minutes because your looking at the damn proof!
speedyvedo99 1 year ago
This is an awful example of putting together a PC... Doesn't ground himself and just goes ahead and gets his finger oils all over the contacts on the RAM.... And everything is done from one side.. he didn't even make an attempt to manage cables..
ooblik 2 years ago
calm down buddy
Retdelswizdog 1 year ago
@ooblik omg dude, he said he was gonna put a pc together in less than 10 minutes, not take his time to make the perfect computer in less than 10.
Xenonic101 1 year ago
@ooblik yeah ur right. He should've used a ground strap to prevent ESD to his RAM
H3Reconz 1 year ago
@ooblik I work with pc all the time, tuching the ins on ram make no diffrence to it... ever, and toch the case and wow your grounded...
leon777leon 1 year ago
@leon777leon Unless you are statically charged.... Then you would fry the RAM and the oil on your fingers over time can damage the RAM... And unless your case is not painted bare metal in fact no you aren't grounded however if you can remain in contact with maybe the chassis or the power supply the entire time then you are safe... otherwise everything you just said is n00b bullshit... I can't believe you'd reply like that to something someone else already confirmed in the post before!
ooblik 1 year ago
@ooblik I work with GCHQ my job is to make sure pcs and servers work properly and i am always take them apart and putt them back togther. So stfu i know what im on about its my job and my hobbie. So before you reply to this calling me a noob go do your research then get a job that involes you doing this 12 hours a day and die in a fire :)
leon777leon 1 year ago
@leon777leon I seriously doubt that since you can't even write a competent sentence.. And 12 hours a day is illegal in your country...
ooblik 1 year ago
@ooblik Im a lazy typer when i get home and cant be fucked to go over everything. Um no its not in my country we do a 12 hour shift and have a nap for a bit of it and we take it in turns. Go look up my job you ass before you reply agian.
leon777leon 1 year ago
@leon777leon Typing has nothing to do with it. And governments pay people all the time for doing a crap job. They also switch out their systems often enough for anything like that to go unnoticed. A shitty job unnoticed is still a shitty job...
ooblik 1 year ago
@ooblik I would wacth "SHITY". Do you even know what GCHQ is? Probably not your a yank
leon777leon 1 year ago
how you didnt use the pie 6pin from your psu to connected to the graphics card instead of using the molex to 6 pin
silentx88x 2 years ago
they should make a wireless power supply..lol
lysenko133 2 years ago
two words 'cable managment'
jricketts1 2 years ago
By the way which motherboard is that?
woollster00 2 years ago
jesus 1666mhz 8gb of it lmao XD and you only use a shitty geforce 9600 you have 2 pci 16 slots too so much potential i hope you sli or crossfire some cards :) nice video
woollster00 2 years ago
if i was spending that much, id take my time..
Splooshiba 2 years ago
by edi u mean ide......way to go and slam ur parts around too btw.
bstankhaloclan 2 years ago
makes sense :D
DwhNeo 2 years ago
just one question why a 700w psu for a 9600gt...??
DwhNeo 2 years ago
@DwhNeo prolly cause he might do sli in the future :)
csplayer12345 2 years ago
since he has a good motherboard with room for updating it saves him buying a new psu and replacing it
woollster00 2 years ago
how much did all this cost
maxedoutjskater 2 years ago
nice setup you got there, AND BTW GREAT MUSIC, god some people never have anything else better to do than complain, well done for setting it up in 10mins thats hell fast i set mine up in around 20mins if i have all the right gear with me.
benljdavis 2 years ago
thanks dude people hate because they cant do it
overdrawnlugo 2 years ago
@overdrawnlugo because they don't know how. It's quite simple really. O.o
mrfindful 2 years ago
you have an emachine, 'nuff said. eMachine is like the Big K of computers. yea it gets the job done, but if you have any pride you stay away.
JustinandNemo 2 years ago
8 gigs is normal high end gaming pc. the max amount of ram to go into a desktop is 24 gigs in triple chanal with 4GB sticks
but its a waste to have that much
fergoway2go 2 years ago