Solid flat tappet cam, 180cc Dart Heads, 2.02-1.6 valves, Stock steel GM crank 5.7 H beam Pro Comp rods.
We used this combo because we already had the heads. The car had just been bought so we didn't want to put a lot of money in a motor till it was dialed in. Even so he won 1 race, finished 3rd 4 times. They are doing a good bit of chassis work over the winter and I am building a 383 for them now. Will post video when done.
Solid flat tappet,,250-260@.050,,.530-.540,,106' centerline. Heads are DART 180 with 2.02-1.6 pocket ported-milled to 58cc- compression is 11-1. Stock GM Steel crank with Procomp H-beam rods. Customer has won 1 race & finished 2nd twice 3rd 4 times. Does not race a full schedule. Will soon be switching to a 406 which I'm finishing up now & will test & upload video when done. THANX for watching!
This is a circle track motor. Will be used in a "Limited Late Model" class on dirt tracks from 1/4 -3/8 mile. These are chassis cars with fiberglass replica bodies (mostly Camaro) and weigh around 3,000 lbs.
Solid flat tappet cam, 180cc Dart Heads, 2.02-1.6 valves, Stock steel GM crank 5.7 H beam Pro Comp rods.
We used this combo because we already had the heads. The car had just been bought so we didn't want to put a lot of money in a motor till it was dialed in. Even so he won 1 race, finished 3rd 4 times. They are doing a good bit of chassis work over the winter and I am building a 383 for them now. Will post video when done.
THANX!
OneAceracer 4 weeks ago
what size rods?
redneckfun69 4 weeks ago
Solid flat tappet,,250-260@.050,,.530-.540,,106' centerline. Heads are DART 180 with 2.02-1.6 pocket ported-milled to 58cc- compression is 11-1. Stock GM Steel crank with Procomp H-beam rods. Customer has won 1 race & finished 2nd twice 3rd 4 times. Does not race a full schedule. Will soon be switching to a 406 which I'm finishing up now & will test & upload video when done. THANX for watching!
OneAceracer 6 months ago
solid flat tappet or mechanical roller? also, what runner volume, valve size and combustion chamber CC are the heads? stock crank/stock rod?
Badchevee1 6 months ago
This is a circle track motor. Will be used in a "Limited Late Model" class on dirt tracks from 1/4 -3/8 mile. These are chassis cars with fiberglass replica bodies (mostly Camaro) and weigh around 3,000 lbs.
1aceracer 11 months ago
have you put his motor in a car yet an made a pass
infamousnova 11 months ago