True RMS analog amp meter

[hannobisschoff1]

I hope you changed your crocodile clips for some breadboards since you've made this video.

[theoriginalJASONXYZ]

will it run without a battery?

[buckstarchaser]

10 minutes staring at the words "DC AMPERES".

Turn it over and see its coil. Coils resist changes in curent. Ironic that it's the basis for your project.

You're also misunderstanding the definition of "back EMF". You're clearly interested in electronics so treat yourself to some classes. O-scopes are a crutch when you can't do the circuit analisys. I don't mean to be a troll, seriously, I just don't like people making videos that spread false hopes but are ignorant of what's really happening.

[fencekid]

where did you get this meter? i need one, and am having trouble finding one.

[overunitydotcom]

Hi Todd, did you now try to run your motor just on charge capacitors ? Maybe get a few supercaps and try to run it on them... If you really have so much output try to use all your output coils in series fed into an impedance transformer to match the impedance of the output to the input and use a greatz bridge after it to charge supercaps. Then use the supercaps to run the input. It is all a question of the right impedance ! Let us know your progress on overunity dot com Many thanks.

[ktservicescorp]

I am waiting for them in the mail. I ordered a couple on ebay. They are cheaper then I imagined. $5-$10 bucks. Yes there is a "sweet spot" that you can FEEL! I have been moving the reed switch around as well as the coil to find it! I am reading up on how to use an occiloscope so when I get one I don't look like an idiot :) Thanks for the comments Stephan!

Todd

[Careica]

And why you are not making patent? :D

Careica

[ktservicescorp]

FREE! I wouldn't want people to pay

[Careica]

And you would not like to be rich? Eaven if world richest man? Becose if your setup work, it will make money. And if you dont make patent, somebody else make it, and make people pay...

I dont want pay for energy!

Reg. Careica

[Vercingetorix1313]

Because this man is a purest like me when I get started give it away. Every War in the last Hundred Years has been over energy.

[PappyDan]

i think your connections are hurting you.

it is time to solder them up for a much better connection.

by doing this you will get much better readings on the meter.

[ktservicescorp]

I agree...I haven't had a chance to answer my email. I will do that today.

[quad2004]

If your input current is really low, Im Like Everyone else, What is its Hp? and have you tryed feeding the backEmf back to the cap.

Let us know what happens.

Im in the process on bulding a pulse motor also, but im using a 10,000 v cap out of a microwave. but im also aiming for a few Hp also.

[ktservicescorp]

The last reading was capturing the BEMF to a cap and a load.

[overunitydotcom]

If your input current is really this low,

why can´t you just loop back the BACKEMF output and run the motor from itsself ?

Did you try this yet ?

Howlong does it run then ?

After how many minutes does it come to a stop ?

Many thanks. Regards, Stefan.

( overunity dot com )

[surproster]

I agree-try removing the batteries completely and take your input power from the caps. Appears as though you are only using 50 ma and generating 100 ma amps

[Careica]

No way. Will not work. Cose ktservicescorp's machine make output is pulsing! And think what happend when you put them in rele? It will start going crazy! Will not work, and if you turn AC to DC still will not work. But you can charge batteries for it as well.

Nice Job!

Careica

[ktservicescorp]

look at the comment to everunitydotcom. I don't know that it will work with the current setup.

T

P.S. Thank you!

[ktservicescorp]

yes...I working on the circuit to do that and waiting on a bigger cap in the mail.

T

[ktservicescorp]

It is very strange. I try to tie all the electricity I am gathering from the alternator, the BEMF and the secondary coil and it doesn't read the same output as when they are separate. I need to add some diodes to make sure all the current is flowing the same way and I need to buy one big cap to do what you are talking about. I am working out the circuit on that.

Thank you,

Todd

[Careica]

Yes. You are right!

But think about that: If you put in 0,7W and output load is 2W lamps! And they are bright, so you have overunity. You make count right!

Careica

[crazzieg]

Dude any dearsnovol meter movement has a stander fs (full scale) movement rateing millivolts per devision or deflection all that changes is the shunt the meter reads across. A good way to make a shunt is by using the nichromium wire out of an old heater the glowing wire type. Using this can extend your range to several 100 amps if needed. Not trying to be a smart ass just trying to keep it cheep. I like junk.

[crob227]

me too.

[ktservicescorp]

Yes...I am looking at shunts and a panel meter that reads milliamps.

Todd

P.S. Don't sweat it...smart ass is my middle name (used to be "Danger")