how fast does that bike go, i was thinkin about gettin one there was an recall on all baja motorsport bikes and go karts so i didnt get a chance. but rite now i have this crappy bike i bought off of craigslist. i fixed everything all it needs now is a clutch
hey i have a 6.5 horsepower go cart it is fast besides the guy said putting the 13 hp engine wasnt fun he said it was more fun with a 6.5 hp on a mini bike go carts differ but my go cart still hits pretty fast
no, actaully you dont, because they ahve CVT's, which stand for continuously variable transmission, basically it adjust to the need, it is the original engines fault they dont go fast, the way the throttles are setup is so where the throttle is set is how fast the engine will go, unlike a engine ment for a bike or quad where it will excelerate slowly at the throttle set. ATV's and Ski-doo's have been using these type of transmissions for many many many many years.
these dont have cvts they have clutches just like a pocket bike but a pocket dirt bike has a cvt transmission that would be why a pocket bike sounds different then a pocket dirt bike
yes they do have CVT, its a chain CVT, not a belt CVT, if u had had one of these, then you would know that they do have CVT's. Read the manual for one of them, it is a CVT, not a very good one, and not a belt driven one, but a CVT none the less.
who ever the dude is that said there 2.5 engine made it up to 40 to 50 mph must be on some kind of acid trip when hes riding it becuase there is no way humanly possible to get 2.5 hp motor to do 40 if ur lucky ur gonna get 25 mph.
Well if that worked for you then cool but it didn't do enough for us so thats why we put a bigger motor on it. It's not for the speed, it's for the torque to move all the fatasses that ride it.
with the 13hp on it we couldn't keep the front wheel off the ground. There was just WAY to much torque plus only a few people could ride it. Great idea but it just wasn't fun.
where did u get that muffaler or did u make it this is the best vid ever holy shit the 500cc polaris is massive are those custome tires they look hudge for it?
i need help... i hav a baja doodlebug and i want to buy a 4hp - 6.5hp honda for it... do i need to do any modifications to the bike like add a clutch to it??? plz reply
We used a generator motor so we had to file down the shaft and put in a keyway. We used a 5/8" clutch,added a chain tensioner and welded a new mounting bracket. We made the mounting bracket so we could put the old motor on quick if we needed to.
Dude Ive watched these videos at least 20 times and I fuckin wanna get a 13hp engine insted of the shitty 2.5 hp engine, all I want to ask is was it difficult putting in the engine, cuz I have no experience at all with this stuff
is it just like screw shit back in and it all works perfectly or do you need to get something ??
We beat the hell out of the 2.5. It even went under 4ft of water and we just pulled the plug,cranked the pull start a few times put the plug back in and away we went. Yeah their strong.
dat shit fast
JohnnyE71 2 months ago
lol the gas tank
OGKILLa9365 5 months ago
DAAAAAAAAAYYM!
SuperSushicat 6 months ago
looking good fatty
rudy7921 7 months ago
slow as hell
Lakersrock24ify 1 year ago
why not try a 9 or 11 hp engine and use a jackshaft?
dethter 1 year ago
that lady saying "ready set go" is fucking annoying as hell
coopercrue 1 year ago 2
how fast does that bike go, i was thinkin about gettin one there was an recall on all baja motorsport bikes and go karts so i didnt get a chance. but rite now i have this crappy bike i bought off of craigslist. i fixed everything all it needs now is a clutch
Mike12346567 1 year ago
what kind of motor is it? thank you
roltard 1 year ago
don't want to sound like your mother...... but if your going that fast shouldn't you have a helmet????
nolook 2 years ago
hey i have a 6.5 horsepower go cart it is fast besides the guy said putting the 13 hp engine wasnt fun he said it was more fun with a 6.5 hp on a mini bike go carts differ but my go cart still hits pretty fast
danielpilot95 2 years ago
how fast were you going fully opened?
SBskater6969 2 years ago
hey what clutch did you use?
gurudude2themax 2 years ago
read my user name backwards
elohssanarouy 2 years ago
the guy on the 4 weeler makes it look like he bairly beet him, but I LOVE THE DOODLE. lol.
gambler86559 2 years ago
you do not need more HP you need more gears but cool video
Godfather7ify 2 years ago
no, actaully you dont, because they ahve CVT's, which stand for continuously variable transmission, basically it adjust to the need, it is the original engines fault they dont go fast, the way the throttles are setup is so where the throttle is set is how fast the engine will go, unlike a engine ment for a bike or quad where it will excelerate slowly at the throttle set. ATV's and Ski-doo's have been using these type of transmissions for many many many many years.
Lownoteplayer 2 years ago
smaller rear sprocket would still raise the max speed...
I think they need to extend the frame about a foot farther back,,,
JoshatSuzuki 2 years ago
these dont have cvts they have clutches just like a pocket bike but a pocket dirt bike has a cvt transmission that would be why a pocket bike sounds different then a pocket dirt bike
elohssanarouy 2 years ago
yes they do have CVT, its a chain CVT, not a belt CVT, if u had had one of these, then you would know that they do have CVT's. Read the manual for one of them, it is a CVT, not a very good one, and not a belt driven one, but a CVT none the less.
deanbassist01 2 years ago
casepker i belive u i have on its red i can get to 40
a4miniquad 2 years ago
i have one
ford1979truck 3 years ago
who ever the dude is that said there 2.5 engine made it up to 40 to 50 mph must be on some kind of acid trip when hes riding it becuase there is no way humanly possible to get 2.5 hp motor to do 40 if ur lucky ur gonna get 25 mph.
amd80787 3 years ago
my 2.5 hp doodlebug does like 30
sirkyar 3 years ago
must have meant km
1curt12 3 years ago
My stock doodlebug with me on it 140 lbs does 37 on gps if you dont believe me ill make a video to show you.
casepker 2 years ago
fuck you i got mine to 32 completely stock and im 160 pounds so eat shit.
Hanzoxx666 2 years ago
lol
elohssanarouy 2 years ago
@Hanzoxx666 what going down a 90 degree hill?
cat123456789101 1 year ago
The person on the four wheeler could have gone allot faster.
lowlsys 3 years ago
Dude I loved-it that mini bike can move fast lol nice job, dose any body still makes this mini bike?
luisnitro91 3 years ago
baja motorsports has it but it comes stock with a 2.5 or a 2.8hp engine
elohssanarouy 2 years ago
2.5 is stock
Durken316 2 years ago
if you buy it in canada at canadian tire it comes with a 2.8hp baja/lifan basically snowblower engine in it
elohssanarouy 2 years ago
hey man my doodle is in stock what i only did was get out the nut with the spring and it run's like hell please reply
kong1996 3 years ago
Well if that worked for you then cool but it didn't do enough for us so thats why we put a bigger motor on it. It's not for the speed, it's for the torque to move all the fatasses that ride it.
lowkeygt 3 years ago
It's the screw with the spring around it. Just loosen it and it will go faster
kong1996 3 years ago
with the 13hp on it we couldn't keep the front wheel off the ground. There was just WAY to much torque plus only a few people could ride it. Great idea but it just wasn't fun.
lowkeygt 3 years ago
i got one and i did'n change nothing what i only did was get off the nut tu adjust speed and is goes like 40mph~50mph
kong1996 3 years ago
After the first pass we made when it was new we took off the governor and it still did'n pass maybe 20mph with the 2.5hp
lowkeygt 3 years ago
where did u get that muffaler or did u make it this is the best vid ever holy shit the 500cc polaris is massive are those custome tires they look hudge for it?
colin0the0magicman 3 years ago
i need help... i hav a baja doodlebug and i want to buy a 4hp - 6.5hp honda for it... do i need to do any modifications to the bike like add a clutch to it??? plz reply
rororo64 3 years ago
yeah ull need a new clutch probably
barneyownage 3 years ago
did you change the rear sprocket?
holypugo 3 years ago
super nice thinkin bout gitin 1 my self 4 me n my little brother
braxtonforlife 3 years ago
We used a generator motor so we had to file down the shaft and put in a keyway. We used a 5/8" clutch,added a chain tensioner and welded a new mounting bracket. We made the mounting bracket so we could put the old motor on quick if we needed to.
lowkeygt 3 years ago
Dude Ive watched these videos at least 20 times and I fuckin wanna get a 13hp engine insted of the shitty 2.5 hp engine, all I want to ask is was it difficult putting in the engine, cuz I have no experience at all with this stuff
is it just like screw shit back in and it all works perfectly or do you need to get something ??
shayan7710 3 years ago
Hey i wanted to ask you the original motor is it strong cause im beating mine:)
chrisintegra 3 years ago
We beat the hell out of the 2.5. It even went under 4ft of water and we just pulled the plug,cranked the pull start a few times put the plug back in and away we went. Yeah their strong.
lowkeygt 3 years ago
where did you buy the engine and how much did you buy the engine for (doodle boss)
dude i got a baja blitz with the shitty 2.7hp engine and i fuckin envy you man, this is some greatttttt shit
shayan7710 3 years ago
Man you just need a super small rear sprocket and to get rid of the Gov.
OH yeah....Get a Helmet too! LOL!
Neat vids!
DSINKS 3 years ago