ONLY CHAMORROS! YEAH WHATEVER BOY! WE RUN THAT SHIT HERE TO. YOU JUST NEED TO TRAVEL AND SEE WHAT EVERYBODY ELSE HAS BEFORE YOU SAY SOMTHING TO EMBARESS YOUSELF YOU KADUKU! HAFA!.
@KAHALUUZFiiNEST Crankcase breathers. They keep the gasses from the oil, caused by the engine running and getting it warm, from building up in the engine. It also helps keep the oil from too much aeration, getting foamy, and not lubing properly. His, are air filters to keep garbage out. EFI vehicles, have a vacuum hose running from there to the intake.
@jehMEii I do run pump gas still but I did move up to 93 octane instead of 87 but I can use 87 just have to retard the timing a bit ...but all in all it runs good now with the new motor just have not got any videos maybe next weekend I will have a some track videos. gonna be spraying the nitrous as well so hope it runs good...
@SALVATIONFROMBEHIND the intake I had baught for 200 with linkage and the Mikuni's I have now I got for 250 but it all depends on what kind of side draft you want to run...
@SALVATIONFROMBEHIND it depends on how big you want to go and what your looking for you can find a used intake and side draft on ebay for about 350-700..
I am running a custom grind Schnieder racing cam has a 537 lift intake and exhaust just rebuilt with eagle rods and forged pistons 11 to 1 comp. and just hooked up a NOS Fogger system as well..I will post the new videos later..
nice! I'm in the middle of a rebuild/pep up of the 22re in my 91 PU; my cam's only 425 lift, but it along with the modified head, ehaust, and intake should be pretty stout :) How does that motor handle the nitrous? what shot are you running? props man; I'll be looking for the new videos! are you on YotaTech?
Yeah side drafts are real good for off road the only down fall to them is if you get it submerged in water other than that it would work just fine..My brother has a crawler as well no issues..
ONLY CHAMORROS! YEAH WHATEVER BOY! WE RUN THAT SHIT HERE TO. YOU JUST NEED TO TRAVEL AND SEE WHAT EVERYBODY ELSE HAS BEFORE YOU SAY SOMTHING TO EMBARESS YOUSELF YOU KADUKU! HAFA!.
GESmith2626 9 months ago
The person below me is a fag
2strokequad 10 months ago
rev it like a man xD -P sounds nice -_-
mfuji02 11 months ago
This sound is music to my ears.. Looks good..
yellowhilux 1 year ago
the 2 red things on the head, what r they n what do they do? you can see them good at 35 sec.
KAHALUUZFiiNEST 1 year ago
@KAHALUUZFiiNEST Crankcase breathers. They keep the gasses from the oil, caused by the engine running and getting it warm, from building up in the engine. It also helps keep the oil from too much aeration, getting foamy, and not lubing properly. His, are air filters to keep garbage out. EFI vehicles, have a vacuum hose running from there to the intake.
FTORC1 1 year ago
sounds like a lawn mower -_- its sick tho, but what is a side draft?
mikesandytoes 1 year ago
since you changed your compression on your pistons do you have to use different gas?
jehMEii 1 year ago
@jehMEii I do run pump gas still but I did move up to 93 octane instead of 87 but I can use 87 just have to retard the timing a bit ...but all in all it runs good now with the new motor just have not got any videos maybe next weekend I will have a some track videos. gonna be spraying the nitrous as well so hope it runs good...
TakiLalu78 1 year ago
@TakiLalu78 nice man. what you got runnin here as far as jus the block?
96753HAWAII 1 year ago
How much does it cost, the side draft? i want to put one in my 88 toyota.
SALVATIONFROMBEHIND 1 year ago
@SALVATIONFROMBEHIND the intake I had baught for 200 with linkage and the Mikuni's I have now I got for 250 but it all depends on what kind of side draft you want to run...
TakiLalu78 1 year ago
@TakiLalu78 Oh cool is not that expensive, i thaught it was going to be around 400 or 500. Well thank you for letting me know.
SALVATIONFROMBEHIND 1 year ago
@SALVATIONFROMBEHIND it depends on how big you want to go and what your looking for you can find a used intake and side draft on ebay for about 350-700..
TakiLalu78 1 year ago
Comment removed
CustomCrawlers 2 years ago
takilalu78...where you located...
jdiazmtx 2 years ago
671 represent......chelu's keeping it chamorro style...toyotas..efi's..and sides....just the way us chamorros roll.....
jdiazmtx 2 years ago 5
where did you get that header?
joegfjh 2 years ago
the the sucker move as good as a v6? 0_o
mfuji00001 2 years ago
cool,,motor..
kieviet82 2 years ago
nice
kauai56 2 years ago
dam u must be from the south 828
tashguevara 2 years ago
nice man! what cam are you running? she lopes pretty hard, but damn does it sound good!
iamsuperbleeder 2 years ago
I am running a custom grind Schnieder racing cam has a 537 lift intake and exhaust just rebuilt with eagle rods and forged pistons 11 to 1 comp. and just hooked up a NOS Fogger system as well..I will post the new videos later..
TakiLalu78 2 years ago
nice! I'm in the middle of a rebuild/pep up of the 22re in my 91 PU; my cam's only 425 lift, but it along with the modified head, ehaust, and intake should be pretty stout :) How does that motor handle the nitrous? what shot are you running? props man; I'll be looking for the new videos! are you on YotaTech?
iamsuperbleeder 2 years ago
damn that sounds nice. i miss the sound of my sides
1minitoy 2 years ago
i wouldnt have toke off the EFI. clean tho man..
bigquakeflipz 2 years ago
you should follow right behind me on a dirt road on a hot day
dankSmoka27 2 years ago
Check out my 20r22r hyrid build video with information using 99% stock toyota parts
natescraigslist 2 years ago
Love how clean it is under the hood. My re is just a mess of hoses and wires
stoneyguy123 3 years ago
should have staid with efi
RACHizzo 3 years ago
did you polish the stock valve cover
chriswilliams368 3 years ago
its the chrome cover from LCE
RACHizzo 3 years ago
did you polish the stock valve cover
chriswilliams368 3 years ago
Would this work at angles? I am needing some horepower outta my rockcrawler with the 22R and looking for options.
travisg130 3 years ago
Yeah side drafts are real good for off road the only down fall to them is if you get it submerged in water other than that it would work just fine..My brother has a crawler as well no issues..
TakiLalu78 3 years ago
that's better than fuel inj>? 0_o
mfuji00001 3 years ago
you can get more hp outta a modded 22r than a modded 22re.
brianthehawaiian 3 years ago
more than 3rz taco? 0_o
mfuji00001 3 years ago
Nice set up , Iv got the 38mm outlaw carb on my 22r.check it out on my channel.
chopper904 3 years ago
This has been flagged as spam show
that's better than fuel injection? 0_o
mfuji00001 3 years ago
how do you make yhe modification in fuel injection a like your drive I´m mexicano don´t speak the inglis please learn me thanks men
deplasticotubeyou 3 years ago
Nice set up. Just needs better tuning. Sounds way off.
chronic50pla 3 years ago
Hey hey i know this truck, but hey par nice...
magalahi2004 3 years ago
needs better tuning
671toyota 3 years ago
hafa, is this truck in texas?
chunky671 3 years ago
Yup sure is...had to set it up just like home
TakiLalu78 3 years ago
Sweet Love those side draft setups
Leemoobi 3 years ago