thats cool! never thought of doing that for face masks, i just use a bored and sculpt building up, so my face mask sculpts are all done with solid clay, no core inside. really cool man! I'll have to give this a try on my next sculpt.
@givenupsasuke Well thats a good idea but the whole point of the oil based clay armature is to ensure a cheap homemade armature without the expensive materials like silicone, urethane, as well plaster. The aim in this tutorial is affordable and simplicity. Not complexity.
@Seedot0001 Oh yes absolutely! The only reason why i molded the full head armature is because its the average size of a human head. My head is below average so i wouldnt want to make my half masks smaller than the average size especially if someone ends up buying that mask.
You may want to change up the board to have sides on it just like walls in a mold so that the clay will not seep over if you don't want a mess. Good tutorial juan. But you forgot to point out not to use oil based ON oil based. Unless of course you really cake on the vaseline. But otherwise it will stick. Also why wouldn't you have made it in plaster? XD You could have made a Silicone/latex mold, and then filled it with plaster, pulled it out, placed it on the board, and poured more plaster
@Psyc0Productions One, this is made out of oil based clay because its much more easier than making it into plaster. Two, you should know that when oil based clay melts its not in the consistency of water which means it will not leak because once it touches the wooden board the heat gets absorbed by the board making the melted clay soft. Three, you talk of so much complication into this method why dont you try and make your own out of plaster. Four, this method is intended for the materials you
@Psyc0Productions already have since its just oilbased clay and plaster bandages instead of using ultra cal and silicone. Five, your getting in my fucking nerves since yesterday.
were can i get one of them armatures fro bro
MrJester1972 1 year ago
you rule. thanks for sharing everything!
nerosysverne 1 year ago
well done
DjMikal7 1 year ago
thats cool! never thought of doing that for face masks, i just use a bored and sculpt building up, so my face mask sculpts are all done with solid clay, no core inside. really cool man! I'll have to give this a try on my next sculpt.
TheSpyrole 1 year ago
I would say you can use urethane rubber and then pour plaster into it so you have no plaster bandages sticking to it and it is long lasting.
That is what I do. :)
givenupsasuke 1 year ago
@givenupsasuke Well thats a good idea but the whole point of the oil based clay armature is to ensure a cheap homemade armature without the expensive materials like silicone, urethane, as well plaster. The aim in this tutorial is affordable and simplicity. Not complexity.
EvilSlaughter13 1 year ago
Thanks a lot ! :)
FingoLacerta 1 year ago
can i put plaster bandages on my face and mould my face instead?
Seedot0001 1 year ago
@Seedot0001 Oh yes absolutely! The only reason why i molded the full head armature is because its the average size of a human head. My head is below average so i wouldnt want to make my half masks smaller than the average size especially if someone ends up buying that mask.
EvilSlaughter13 1 year ago
You may want to change up the board to have sides on it just like walls in a mold so that the clay will not seep over if you don't want a mess. Good tutorial juan. But you forgot to point out not to use oil based ON oil based. Unless of course you really cake on the vaseline. But otherwise it will stick. Also why wouldn't you have made it in plaster? XD You could have made a Silicone/latex mold, and then filled it with plaster, pulled it out, placed it on the board, and poured more plaster
Psyc0Productions 1 year ago
@Psyc0Productions One, this is made out of oil based clay because its much more easier than making it into plaster. Two, you should know that when oil based clay melts its not in the consistency of water which means it will not leak because once it touches the wooden board the heat gets absorbed by the board making the melted clay soft. Three, you talk of so much complication into this method why dont you try and make your own out of plaster. Four, this method is intended for the materials you
EvilSlaughter13 1 year ago
@Psyc0Productions already have since its just oilbased clay and plaster bandages instead of using ultra cal and silicone. Five, your getting in my fucking nerves since yesterday.
EvilSlaughter13 1 year ago
Comment removed
Psyc0Productions 1 year ago
@Psyc0Productions i agree give this a shot
DjMikal7 1 year ago