Hey, I have the same turntable, but I use a Shure M97xe cartridge. I am new at this, and I am trying to figure out how to align the cartridge, using the protractor included with the cartridge. Could you help me out with this? I don't know what other measurements or adjustments I'd have to make as well... I only adjusted the tracking and anti-skate, and left the height at 0. Thanks!
Just a few things, you're tracking at a FAR too heavy weight. I suggest reducing the track weight a gram or 2. Or you WILL permanently destroy those fantastic records.
And also, you don't have to keep the tracking light on at all times. :P That's for DJing in the dark. I'm not talking about the red light. But the one that shines on the cartridge.
Since that cartridge tracks at 3-5 grams, a lower tracking force will cause mistracking and more severe damage to vinyl. A new cartridge would be a good idea. But, trying to track lighter with that one, NOT.
@chrian31410 ......that is absolutely INCORRECT. the cartridge that is supplied with this table is designed to track at heavier tracking forces. cutting the tracking force to 2 gm. IS NOT RECOMMENDED. this cartridge is designed to track between 3-5gm, with the best results achieved at either 3.5 or 4gm.
also, yes it's true that you don't HAVE to leave the tracking light on, but nothing bad will happen if you do. and no, it's not just for dj'ing in the dark! where do you get this????
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
hey can you check out the video on my page on my ATlp120 i think it might have a speed error, just wanted to know if yours does the same thing, please check it out and let me know with a comment or message i'd greatly appreciate it thanks its the only vid up on my page
hey all, I have a video I made a while back reviewing this turntable. Any questions, stop on by. Some may ahve been answered previously so check the comments! Nice video by the way man. Great shots! Wish I had an HD Camera
Quick!!! See if you can find " 70's vintage " Quad speaker, amp, and pre-amp system, For god-sake put your turn-table on a concrete base!!!. Great Show. Thank you for this down load.
This has been flagged as spam show
are those the stock needles or did you buy those afterwards???
champbball8 6 days ago
first song is?
FuckingStanz 2 weeks ago
@qkorn What kind of speakers are you hooked up to? Can you post a picture of the outputs? Thanks!
MisterMcFisher 6 months ago
oh man that thing is a beast technics 1200 replicas, same weight but half the price and new too
I dunno if ur into hip hop or not dude but if you, id get a mixer needles and slipmat out the turntable into battle mode and start scratching haha
lifeisaliewithoutaf 6 months ago
pretty cool huh??? i'm so glad that vinyl never really went away and now it's even more popular!
phantasm1004 10 months ago
Where on earth did you get that stunning original "6-eye" Columbia?????? I hope you realize what a rarity you have there!!!
phantasm1004 11 months ago
Hey, I have the same turntable, but I use a Shure M97xe cartridge. I am new at this, and I am trying to figure out how to align the cartridge, using the protractor included with the cartridge. Could you help me out with this? I don't know what other measurements or adjustments I'd have to make as well... I only adjusted the tracking and anti-skate, and left the height at 0. Thanks!
shossni 1 year ago
did you have to adjust the cartridge position with those protractors or it came ready from the factory?
marcelcruzeiro 1 year ago
Just a few things, you're tracking at a FAR too heavy weight. I suggest reducing the track weight a gram or 2. Or you WILL permanently destroy those fantastic records.
And also, you don't have to keep the tracking light on at all times. :P That's for DJing in the dark. I'm not talking about the red light. But the one that shines on the cartridge.
chrian31410 1 year ago
@chrian31410
Since that cartridge tracks at 3-5 grams, a lower tracking force will cause mistracking and more severe damage to vinyl. A new cartridge would be a good idea. But, trying to track lighter with that one, NOT.
royphil345 1 year ago
@chrian31410 ......that is absolutely INCORRECT. the cartridge that is supplied with this table is designed to track at heavier tracking forces. cutting the tracking force to 2 gm. IS NOT RECOMMENDED. this cartridge is designed to track between 3-5gm, with the best results achieved at either 3.5 or 4gm.
also, yes it's true that you don't HAVE to leave the tracking light on, but nothing bad will happen if you do. and no, it's not just for dj'ing in the dark! where do you get this????
phantasm1004 11 months ago
what cartridge model do you used on the tt? sounds fantastic
fertub26 1 year ago
Is this the cartridge and hardshell it came with and if it is how good is it?
mclovin4uz 1 year ago
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
ltppunk 1 year ago
This has been flagged as spam show
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
ltppunk 1 year ago
hey i have a video up on my page with my AT-lp120..i needed some advice cause i possibly might have a operatiing error with the turntable, any advice you can give or let me know if your turntable does the same thing would be greatly appreciated! thanks again, please comment back when you have the time on my video, its the only one i got thanks
ltppunk 1 year ago
hey can you check out the video on my page on my ATlp120 i think it might have a speed error, just wanted to know if yours does the same thing, please check it out and let me know with a comment or message i'd greatly appreciate it thanks its the only vid up on my page
ltppunk 1 year ago
to much weight on that styli
TrowbridgeHardcore 2 years ago
what are you playing???
albyxit 2 years ago
What about the humm issues on this thing it's horrible, is it good to get a phono pre amp? thanks!
ioneking 2 years ago
That's a very nice gift. I have been thinking in getting that same turntable. I have that same Miles Davis record. Thanks for sharing.
Interests2009 2 years ago
hey all, I have a video I made a while back reviewing this turntable. Any questions, stop on by. Some may ahve been answered previously so check the comments! Nice video by the way man. Great shots! Wish I had an HD Camera
viperboy749 2 years ago
hi - some reviews say it has a hum issue - did you have any problems with hum? (wonder if its induced from the motor into some cartridges?)
gnativerson 2 years ago
Great turntable! Do you have DSOTM floyd' s vinyl? This is one of the best players in order to play that album!
RDL1984 2 years ago
Quick!!! See if you can find " 70's vintage " Quad speaker, amp, and pre-amp system, For god-sake put your turn-table on a concrete base!!!. Great Show. Thank you for this down load.
eJoonjah 2 years ago
I'm contacting WMG right now to take this video down!
Also, the audio on that camera is awesome.
TheMightyCulp 2 years ago
Haha!
Yeah, it has really good audio. Wait until you see the video in Chicago I shot earlier this year.
qkorn 2 years ago