@biguy525 grabbing any kind of neck loop from the front is just going to give you a better angle to strike back at your attacker, you only have to worry if the chord loops around the FRONT of your neck.
Great Channel. I've watched a handful of your videos and Thumbs Up all around. Very imformative and detailed. That's much appreciated. I was wondering if you could put together a video with your suggestions for apparel. Something for outdoor gear that includes multi weather applications. 24/7 pants, shirts, jackets, boots, utility belts, pouches, etc. Regardless, I look forward to using what Ive learned already. Thanks for the videos.
Just curious, do the cords still pop free easily if you pull them in opposite directions? In other words with a 90 degree bend at the slider? I get the impression that your test was to grasp the slider and snap it off the end of the cord, but I may be mistaken. Thanks.
Great idea! For those of you concerned with the slider getting hung up, you can use simple large wooden or plastic beads similar to a ranger bead setup for this. You will need to test a few sizes to get the right tension you desire. But the end result will be a lower tension threshold to release it. Another idea would be to make a slider using a small separate piece of cord or rubber banding tied with just enough tension to hold ends together. I prefer the beads though. Nice video!
Great job PackRat556, I have never worn gear from around my neck for exactly the reason you mentioned.Gonna go get some sliders ASAP.I mountain bike, Kayak, hike and camp so I will use your idea a lot.Thanks for sharing and stay safe.
Great idea, and those are meant for two pieces of cord. I make a lot of my own gear and use those all the time, it's a pain in the butt to get them threw, but they are quite sturdy.
I tried this some two years ago carefully using a slider with a weak spring and avoiding ridges on the end of the 3mm pp cord, put it around my neck and janked. It hurt more than i care for and i use a thin (say 1/8 inch) ring of bicycle inner tubing now, wrapped a few times (i use 3).
Please consider that the forces on the slider will be sideways increasing friction and the ridges may jam in the slider.
You have me quite a bit worried, please reconsider your system.
Great video. Here in California a concealed neck knife is illegal (at least a fixed blade, I'm not sure about a folder but I think it's OK).
MathewsBowHunter2000 10 months ago
Removing the inner core will reduce the 550 strength to 100 pounds. A knot will further reduce the strength to about 85 pounds.
bullthrush 1 year ago
@bullthrush bullshit. the core accounts for 300 pounds of the cord's breaking strength.
mysss29 4 months ago
@mysss29 ...besides, 85 pounds is still quite sufficient to strangle you.
mysss29 4 months ago
this is a great idea, thanks man
VoidOnTuesday 1 year ago
How would it react if you were to get in a fight and someone was to grab it an try to choke you? Good video.
biguy525 1 year ago
@biguy525 grabbing any kind of neck loop from the front is just going to give you a better angle to strike back at your attacker, you only have to worry if the chord loops around the FRONT of your neck.
VoidOnTuesday 1 year ago
Great Channel. I've watched a handful of your videos and Thumbs Up all around. Very imformative and detailed. That's much appreciated. I was wondering if you could put together a video with your suggestions for apparel. Something for outdoor gear that includes multi weather applications. 24/7 pants, shirts, jackets, boots, utility belts, pouches, etc. Regardless, I look forward to using what Ive learned already. Thanks for the videos.
YoungGun0085 1 year ago
do u know of any knots that would do the same thing?
oud25 1 year ago
Very good video.All your videos are full of valuable info.
EagleScout556 1 year ago
Simple..yes, but a great idea. Thanks for the vids!!
TheYTViolation 1 year ago
great idea.
hinckleypoland 1 year ago
I simply don't understand why people post negative comments on PackRat's channel. He seems honest and nice enough
braxtonamour 1 year ago
Google "safety lanyard". There are places that sell in-line break-away pieces that won't require pain/friction.
mrmonkeyman50 1 year ago
Just curious, do the cords still pop free easily if you pull them in opposite directions? In other words with a 90 degree bend at the slider? I get the impression that your test was to grasp the slider and snap it off the end of the cord, but I may be mistaken. Thanks.
patidwelljr 1 year ago
I've been using this same set up for a while now & I've experienced zero problems.
Great comment on getting quality toggles (sliders) & I'll second that they should be the right size for the cordage.
Thanks again Packrat & thanks to JC. Sharing tips & ideas like this one helps us all.
CampfireTalk 1 year ago
Comment removed
CampfireTalk 1 year ago
Thanks for posting!
Your ideas are always helpful
60odeeman 1 year ago
Great idea PackRat.
Cr0cket20 1 year ago
Good idea and tip glad you shared it.
medicjimr 1 year ago
Great stuff. Keep em coming.
7inmag1inpipe 1 year ago
rock on! great idea
barnettzack 1 year ago
great idea!!!! I use a neck knife around the camp but never walk with one because of the points you have brought up.
epetrie 1 year ago
Great safety tip. Kudos!
1420truthseeker 1 year ago
Great idea! For those of you concerned with the slider getting hung up, you can use simple large wooden or plastic beads similar to a ranger bead setup for this. You will need to test a few sizes to get the right tension you desire. But the end result will be a lower tension threshold to release it. Another idea would be to make a slider using a small separate piece of cord or rubber banding tied with just enough tension to hold ends together. I prefer the beads though. Nice video!
jaytheirish 1 year ago
nice vid
buggymak 1 year ago
Great video. Gives you something to think about. Keep up the good work.
05MagnumSXT 1 year ago
Nice one, thanks.
Roboflux 1 year ago
great job 7 stars for safety you and bcafotw both great channels thank you again
crazzzyduckz1 1 year ago
Great job PackRat556, I have never worn gear from around my neck for exactly the reason you mentioned.Gonna go get some sliders ASAP.I mountain bike, Kayak, hike and camp so I will use your idea a lot.Thanks for sharing and stay safe.
rogrich 1 year ago
can you do a review of this knife?
PittRules55 1 year ago
Great idea, and those are meant for two pieces of cord. I make a lot of my own gear and use those all the time, it's a pain in the butt to get them threw, but they are quite sturdy.
Pir8AdventureLeague 1 year ago
Thanks
After watching your channel I wont look like such a camping noob.
darkwhitedirewolf 1 year ago
Nice topic! great job!
cadrician 1 year ago
I tried this some two years ago carefully using a slider with a weak spring and avoiding ridges on the end of the 3mm pp cord, put it around my neck and janked. It hurt more than i care for and i use a thin (say 1/8 inch) ring of bicycle inner tubing now, wrapped a few times (i use 3).
Please consider that the forces on the slider will be sideways increasing friction and the ridges may jam in the slider.
You have me quite a bit worried, please reconsider your system.
tislafl 1 year ago
Great video.
Is that knife the Rat 3 by any chance?
Also... have you, or could you, do a vidoe on knots?
Maybe ones you use the most or what not.
markshmily 1 year ago
Fantastic idea PackRat, great safety feature.
ColinOutdoors 1 year ago
Great video. I was concerned about this issue too. Thanks for sharing ideas.
tekknorat 1 year ago
Good idea bro... :)
faranglaw 1 year ago
Kool video. I highly doubt anyone would ever hang themselves with their neck lanyard by mistake though.
xAZAZELx13 1 year ago
-- Great idea! -- I wonder how the sliders from CountyComm would measure up....Just wondering.
AppalachianFreedom 1 year ago
Great demo and info, for any one choosing neck carry system.
thank you for the kind words, look forward to feed back.
thanks and our best, Tom / JC
bcafotw 1 year ago