Effect of Recirculating BEMF back into Coil test 1

[ilav1m8y]

You probably won't believe me when I say this but if you'd run your motor recycling the BEMF over a long period it will actually run cold. The cold vacuum aspect of electricity also has a supercunducting effect that draws energy from sorrounding space making things run more efficiently. What are the applications for this, try a cold running Quad-Core gaming PC processor that will never heat up or slow down.

[wjbombo]

Excellent Demo! Thank you for sharing gotoluc.

[mimieowcat]

Hi, Luc!

You could use the relay, wich is controled by 555 timer instead of motor and reeds. it`s easy to adjust and mode efficient.

If you are interest in this kind of things, please google for "Bedini motor". it`s working on this effect.

Thank you =^^=

[ZincFold]

Keep up the interest..Back EMF will open the doors to out of the box thinking. Cheers

[ZincFold]

As an example we miss the fact that our planet in its self is a self contained ball of energy. What you are trying like myself and many others is to find is a workable use for this concept. Some guru's in India eat nothing but a pea and a T-spoon drop of water a day yet they function. I believe some secrets to over unity exist in our own bodies and electrical magnetic manipulation to some extent is just the tip of the iceberg. I say extent cause quantum is yet another story.

[ZincFold]

The energy stored in an EMF is more then what was used to create it. You create an EMF and that in its self can create a charge as well as when it collapses. From limited understanding we build circuits only to deal with the positive side and the back side of it is regarded as unwanted I'd call that a waste. My personal research shows pulsing over unity to some extent using your concept. what you are doing here is a basic demo of the Joule thief. We are wasteful beings ;)

[oystla]

Could be this is only a resonance effect, i.e. resonance frequency for the magnet lifting/vibrating is met. And at high efficiency also since the back emf energy also is used to move the magnet.

So the back emf is not lost as heat, but used to do work.

[gotoluc]

Hi oystla,

I don't think it has to do with resonance as it behaves the same way at different frequencies. It looks like it is all caused by the back emf being redirected in the coil that is causing this. Also see test 2 video as there are some good comments there that explains some of this. Also read the Overunity forum topic (link in description box next to video)

Luc

[m3sca1]

i like the 2 reed switches idea for the shorter pulses,think i might try that.

[marthale7]

This would be very kool in a motor..... If you could put this into todays motors they would be much more efficient.

[gotoluc]

Yes marthale7,

I'm testing this hoping it could be applied to an electric motor.

Luc

[bartley440]

I like the USB scope you're using. Who makes it? What brand is it?

[kubikop]

Nice!

I understand when you pulse the coil your trying to repel the magnet, once you loop the Flyback voltage back into the coil which is just as the Field collapses, it gets an extra pop of energy.

Does the speed of the dremel rotor alter any from the two positions?

Paul..

[gotoluc]

Hi Paul,

yes! you have that perfectly correct and It seems that extra pop comes at no extra cost of energy.

Varying the speed of the dremel motor changes the frequency and since the spacing between the reeds stays the same then the on time reduces as frequency rises or the other way around if the speed drops.

Luc

[MAllen7424]

You are flip flopping the magnetic field...why not put a spinning rotor in the application and......

[gotoluc]

Hi MAllen7424 ,

sorry but unfortunately it does not flip flop the field. When the coil is switched off it takes the collapsing field (which is now going at opposite direction of the original activating current) and the diode sends it back in the coil the way the original current was going in, so there is no reversing of the field. I wish it was reversing.

Luc

[skinostra]

Well done you are on the verge of OBTAINING the ELUSIVE MaGnEtiC CuRrEnT.Tip Try winding your driving coil with insulated IRON wire and see if that makes any difference!Oh and do NOT use and Iron core in your new coil

[Can101276]

You have achived a virtual doubling of the hertz rate by tapping the coil twice with the same pulse, great work!

And if that is so, and the coil is resonating, then you have reached a new harmonic of resonance.

Tesla seemed to infer that the higher the voltage used the greater the results.

Again nice work Luc.

[gotoluc]

Hi Can101276,

thanks for posting your positive comment.

My first test setup was using a mosfet as a switch. It was capable of taking up to 600 volts but I found no benefits with voltages over 200v as the current started climbing. Maybe the coil length needs to be longer as the voltages goes up.

More testing needs to be done to come to understand or use this effect.

Luc

[crippled82]

Nice scope, which one are you using?

[gotoluc]

Hi crippled82,

you can get them on eBay for $180. delivered. Model DSO-2090 USB

Luc

[crippled82]

Thanks,

You should look into leedskalnin perpetual motion holder, which, I think, circulates current , backemf and backemf field between 2 coils on the same core.

[Gintaras]

Thats very interesting, you should experiment with this more, I think you could find a way to get a lot more power from the motor by recycling this BEMF.

[gotoluc]

Hi Gintaras,

more experiments!.... I don't think my girl friend is going to like that!

Thanks for looking.

Luc

[YouMockMe]

In principal couldn't it be the same as a motor so as it spins the positive and negative are in just enough line that when the switch is activated it begins to "hover" at that range?

[gotoluc]

Hi YouMockMe,

I'm sorry but I think you're not understanding the test. The rotary switch power is always connected to the coil and is not strong enough to move the magnet. When I press the switch, all it does is re-directing the collapsing field back in the coil. No extra energy is added!... in fact, the power consumption goes down when I do this and the result is making the magnet levitate WITH NO EXTRA ENERGY.

Luc