BEHRINGER Xenyx 1202FX Mixer Demo

[Blues4Winter]

Why didn't they put the effects listing in the manual? Where eff can I find a listing? Just trying to find if one of them is compression. It sounds like "80" might be compression plus tight reverb. Not a bad little mixer.

[kingsofcarnage]

@AlexWhiteProductions Stereo outputs only. Closest you could get to that would be having the channels you want to record have the fx turned up and hook up your recording device to the fx send output - but that would only be in mono. Think I've used that for a monitor for the drummer.

[jazzmaster700]

"quwata" inch?

[Vladthedruid]

Could i use the 4 mic inputs for drums and the ither ibputs for the guitar? Also could i pkug it into my pc and if so how?

[kingsofcarnage]

@Vladthedruid Only if the other inputs come from a line-out on a guitar amp (headphone output would be okay, but you might find it a little distorted...should be ok though)

[Dethklokrules202]

what does mixer exactley do? 

[JCH34DR1PP3RCJ]

@Dethklokrules202 what a mixer does

[jwalsh8]

does this mixer come with an rca cable or do i have to buy one

[MrBebemicmic]

@jwalsh8 u must buy it

[ZenSurfing]

Fire this idiot! What a crap presentation uh,uh ,ugh!

[theSunamer]

@ZenSurfing yeah! right! hire well paid one. And all the customers will eventually pay for him ))

[HT3R21]

Thanks for the video, helped a lot :)

[tmbg1985]

mine has started to give a single feedback tone, I think it has cooked itself. The effects signal seems to be at the root. If I turn down all effects , The noise/feedback tone goes away. Had it about 2.5 years

[moexus]

FX stopped working after 1 year here. make sure it doesn't overheat, follow the manual

[ladybabe297]

any body knows the normal echo or number that i have to set up my equipment with

Behringer 1202FX please email me with answer ladybabe297@live.com

[antagony69]

@ladybabe297 program numbers from 50 to 59 are all echo/delay effects.....just turn the black FX nob on the main section....and to select it press the nob (the nob is also a button)

[ladybabe297]

any body knows the normal echo or number that i have to set up my equipment with

Behringer 1202FX

[djkiki49]

át alakito xlr átalakitot kell venni

[touchymb]

how can i connect this mixer to an active speaker

[antagony69]

@touchymb if its one speaker, you conect it on the LEFT main out

[VisionzStudios]

Ok so I have this mixer in my home recording studio and I just bought the audio interface to connect it to my computer (instead of using the mic input on the computer, which gave alot of feedback) so I connected it using a RCA stereo cable to the audio interface and I have the head phones hooked up in the 'phones' slot on the mixer and I don't get any sound out of them besides from the mic. I also have some speakers hooked up to the control slots which only get the mic sound also. So I was just

[antagony69]

@VisionzStudios hey maybe i can help....you have to connect the mixers main outs (not control room outs) to the interfaces input. the interface should be connected to the computer somhow....and to get ALL the sound (mixer and computer) you need to connect the phones to your interfaces phones output...

[Bigtimejonko]

can i use this to hook up a turbtable to my computer?

[OnMyGrindENT]

how can i hook this to a computer? theres no usb port

[haddockface]

@OnMyGrindENT You hook up a splitter cable to the headphone socket on your computer and plug the other 2 ends in as inputs to channel on the mixer.

[NightXemnas]

@haddockface No, that creates horrible noise due to the impedance differences.

[haddockface]

@NightXemnas Not on my setup which is used weekly in pub karaoke.The one time I had noise interference it was caused by a clover leaf connection on the laptop power supply.This was resolved by using a figure 8 adaptor to eliminate the earth(ground) pin.

[NightXemnas]

@haddockface Oh, I misread your answer. That would sound fine (because the headphone socket is going into the mixer, not the other way around), but I think the question that OnMyGrindENT was asking was how to INPUT the mixer into the PC for recording, not input the PC into the mixer for playback. The question was unclear so It can be interpreted either way. Sorry for being so harsh. =)

[NightXemnas]

@OnMyGrindENT You need an audio interface, like the Behringer UCA202. Then use a two way RCA Cable to plug in to the interface, which goes into your PC. DO NOT try to record using the microphone socket on your pc, it will use your PC's default sound card, plus the mixer sends out a line signal, not a headphone signal. The result: terrible noise, and huge amounts of latency. Plus audio interfaces tend to only go for about $30. Grab one.

[VisceralVoids]

I got this because the first mixer I had was too simple and for the price of this I can run a few drum machines and stuff like synths out to a computer to sample and have it connected to monitors at the same time. The other mixer I had was a Behringer as well

[Qber4life]

"Quatter inch"?

[justind507]

they round it up to 100 effects its realy 99 and its technicly not 99 because most of the effects are the same except some are stronger and weaker which makes the difference

[Chronic1er]

@justind507 There are 100, they just start at 0.

[UltraSandwich24]

How do you record? There is no button nothing. In new to recording and the music manual sucks balls 

[justind507]

@UltraSandwich24 you cant record into the mixer . u need a interface to connect it to a computer and you record through your interface

[TheMoosh7895]

@UltraSandwich24 plug it into a computer

[MrGolddigger1234]

can you record 7 mics on one board??

[ihatechristine69]

@MrGolddigger1234 yes you just have to get converters for the xlr cables

[dcbmusic]

haha, cool. thank you.. I want to buy one. :]

[dcbmusic]

Can u record 12 guitars?

[lachoman5]

@dcbmusic yeah, but some channels are MONO... anyway, not body rec 12 guitars at the same time, this Mixer is for a little Studio. i have one! =)

[jackdifferent]

I need some information regarding 1202 fx. I have xenyx 1202 fx but my power suply I have is Xenyx 1202. can I use the xenyx 1202 power supply adapter to 1202fx mixer?

[donotlosefaith]

that's so awesome. i'm gonna get me one...cheaper one from musicianfriend ;)

[ECgod77]

Does this mixer have balanced outputs? I have it and the manual says it doesn't, but I looked at it and it had TRS outputs. I have no way to test if its balanced or not.

[garydink]

Hey man im a drummer and gig out a lot. I want to know if this would be good to mix my drums before sending them to the main board. Please get back to me asap thanks

[chippinfoo]

I would have preferred a DEMO as the title states instead of a PRESENTATION.

[mackietac]

yeah i think that's the version i got, I need an adapter for my, how can i get one?

[kibadanghi]

I have been looking for an actual demo of the effects on xenyx, but can't seem to find anything

[44eelz]

why would you name this video a "Demo"? nothing is demonstrated.

[jamessfromtx]

@44eelz Thanks for the heads-up. Not even gonna watch now

[katiemayuiiik]

@44eelz closing the page!

[theSunamer]

@44eelz  39 people - are you deaf or blind or what?

it is a good demonstration of a product. At least for me - now I know how that console works.

If you want to know how to use it - go to musical college or whatever you may come up.

THIS IS A COMMERCIAL DEMO and not a tutorial!

[omcasa21]

hey can someone help me and let me know if the Behringer 2442FX 24-Input 4/2 Bus Mixer is compatible with digidesign 003 + pro tools le 8

[pawpaupaw]

I need to plug in 2 mics 1 guitar and 1 keyboard to a mixer, would this mixer be good for me?

[FOXGEAR92]

Yes.

[DJMisT0910]

@pawpaupaw yes

[pawpaupaw]

Thanks :]

would i still need an audio interface preferably firewire, to record good sounding quality songs?

[DJMisT0910]

yes u would i recomend m-audio

[antagony69]

@pawpaupaw hey man!!! i got this same mixer, and i do recomend it for what you ask. i myself have 2 guitars, 2 mics, 1 bass, and a keyboard, seems to do the right job. and if you conect this mixer to audio graham 3 (yamaha) it does magik!!

[daydream1nc]

I bought this today, it sounds pretty good, but my only complaint is if I have the FX master all the way up but a single line input's FX all the way down, I can still slightly hear the effect on it. Is this a defective product or are all of them like this?

[pirinst]

@daydream1nc

my behrgr keyboard amps 1800 and 3000fx both did that as well. Even turned off,

the fx would have a sound leakage come through. The fix for me was turn the volume all the way up with nothing connected, fx all the way down and then

switch through all the effects to see which ones were the quietest. Then just left it on one of those setting and it has almost

no effect sound leakage that way.

[daydream1nc]

@pirinst

yay thanks, i'll do that.

[pirinst]

I ended up buying a behringer 802 since

the keyboard amp already has the "effects" built in. Got the mixer because behringer has to use all four channels to get the full rated wattage

which is crazy but I just found about it.

[GuitarJaeger50]

I'm with latitn. WTF kind of "demo" was this.  And this is a representative of Behringer? Good thing he's not one of their salesmen.

[kbkbabbie]

does the control room out/monitor out mute if you plug in headphones?

[hendrixisrockgod]

how do i hook up an rp-80 to a eurorack ub1202 mixer

[Nwood913]

i got you. you CAN plug all that in but there is a catch. If you look at the Mic channels it has a mono input under in for ur guitar. so you couldn't plug them in at the same time i dont think. It would probably sound bad. so u would have to plug the 2 guitars in the stereo channels on the rite side. but for stereo u need a left and right input. so u can but it would be complicated

[shane0jack]

i'm getting this..can i plug in 3 mics and 2 guitars at the same time?

[Starvoid7]

good question.

that's what i like to know.

: /

[Nwood913]

yea u can just take a look at my comment on his. shane0jack's

[latitn]

so what demo all this is in the manual

[jopet1987]

what is the difference between 1202fx and 1202? thanks!!

[davegt666]

the 1202fx has 100 effects presets built in and the 1202 doesn't that's why theres like a $20 price difference between them.

[brus0lee]

on 1202fx you have effect ...

[dvadabest]

Will this work with Mixcraft 4.5?

Let me know someone, Thanks!

[thrashmetalkills]

Thats what I've used it with, If you know what you are doing you can get a killer sound with the two

[maxpeezy]

aye mane to the guy that wants to know how to hook the mixer up to hear your voice in the headphones thru the mic its your computer if you got xp its really easy mane just double click. the volume sign on the botton right hand side...then go to otions n go properties go to playback n check microphone wit vista its tuffer

[MarvinMoshaka]

kwatter inch

;l

[cazbrian3]

I have that mixer and I like it but one down is that there is no power switch so you would either need to plug it into an outlet with a switch hooked up to it or unplug it every time you are done.

[Soulfab]

will it work with protools?

[Soulfab]

does it have phantom power?

[lobofamily]

yes it has phantom power for condenser mics

[trevor61396]

im new to this do u have to have a computer mixing software if you have a mixer

[brucelee380]

i want one of an old school record player i need one with looping for beats does anyone have an idea that would be great.

[43OXFORD]

hey, im thinking about buying my 1st mixer and have been researching them for a couple of months now, i want to connect it to my computer and work with Reason 4.0 and my Akai MPK49, any ideas which mixer will be good for me and compatable? thanks

[alexzeegreat]

i got this last weak and I'm very pleased with it i have a whole band plugged in and recording into a boss br 600...

the next item I'm buying from behringer is the POWERPLAY PRO-XL HA4700 ....

yheese guys should make a video of it...

behringer is my second favorite brand right after Alesis

[Javier142007]

do u know how to set it up so that i can hear myself on the headphones and the beat at the same time while recordin??

[yilito100]

Very good product and reliable!

[UdarlagPeTobe]

I've bought this mixer today along with 4 mics for my drum set. I've tried putting the mixer into a fender guitar amp, but it won't pick up the drums. If I plug in my headphones, it works fine, but sounds really really boomy and I've tried messing with the settings like 14 times, lol. If anyone knows what my problem in please, PM me. Thanks in advance.

[Boulpu]

Could it be a mono/stereo connection problem?

The Fender's input is in mono, so you might wanna check wether you're outputting properly?...

And... did you check your jack cable?

[jacobcampbell123]

i just got this mixer and i love it! it would be nice if it had an on/off switch tho...

[stratplayer32]

Behringer has always been known for their cheap, low quality designs. If you are looking for a mixer for a recording setup, DO NOT BUY THIS OR ANY OTHER BEHRINGER.

Stick with Allen & Heath or Mackie. Youll regret buying this cheap Behringer board.

[ArkAngelHFB]

What kind of effects does this have?

[virgo47x]

Eh, I tried to reply you, but I can't post the link. Go to Behringer's page, there is PDF with preset list.

[Bissmarkpl]

so does your mum

[JasonDTube]

How do you make the Line In ports work?

[kilmister75]

sorry i have this mixer and i dont know how can i connect it to my computer and how record. Can someone help me please?

[smittydoggy417]

you can run the tape out rca's into the 1/8 in line in usually for mics on your computer, you can just take a random video(red,white,yellow) cable that might have a 1/8 on the other side, do u have software?

[kilmister75]

yes i have the audacity and i connect the mixer with the computer by a rca but the computer doesnt recognise the mixer and i dont know why ,can you say me some hardwares for record better than the audacity?¿

thx for your help

[faustsotam78]

if you have uca200 usb interface it+s easy ,just plug tape in\on out of uca 200usb, and tape out send to uca 200usb input , it´s simple

[jcab594]

i just got mine 2day, so good so far, no off or on switch tho

[SkeletinProductions]

why what the video then if you hate it

[drum223]

do i need an audio interface and does it work with cubase le

[djdant]

yeah i've had mine for 2yrs and no problem at all

[musicman2047]

Being an ex owner of the Xenyx 2222fx (from yesterday) i would not recommend this mixer. Mine is now faulty, i regret not taking peoples opinions on behringer products. You'll get your use out of behringer for 5 months before having to send it off to be repaired, just save a up a few more quid and buy a better mixer. Infact today i bought the Tapco 260fx which not only looks better, but sounds better & is part of the mackie family - only £135 from retailer!!!!

[petty1800]

I've been using two Behringer Eurorack mixers since 2002, a V-Amp2 since 2003, and a Composer Pro compressor since 2004, none of which have ever been in the shop. All four products live up to their specs in every way. I also just bought a new little Xenyx 1222 mixer and it's been great so far.

You might have had a bad board, but I'll tell you right now that 9 out of 10 guys that knock Behringer are store sales people who aren't making any money on the small markup they get on those products.

[musicman2047]

I own so much analogue equipment none of which has ever broken down. Ashame the only behringer product i did have gave up on me :( i'm sure there loads of people who are satisfied, (i'll admit the xenyx wasnt a bad mixer in terms of what it offered) but braking down in such a short period has left a bad mark on me. I emailed behringer about the problem 2 days ago, they state i will get a reply within 24 hours, nothing so far!

[samet408]

cool