These are tests to see how to produce more Hydrogen. I also believe that the "Myer" thing can be done without the "lights". Thanks for your question... John AArons
Can you tell me how many cu ft of hydrogen gas per min. you expect to need for your Honda to run at 50 mph on hydrogen only? What is your cell producing now at how many amps and volts? Thanks!! Bobbypatty1
Hi john have you try just the plate and filter paper and a plate with just the filter paper Width on the plates lot of hho gas it's a bit like my water capacitor works well
Hay john. very nice. on this cell i noticed had a bit cut off the bottem of it probabily nothing. also i think if the plates were curved ever so slighty you'd get even more and if that curve was fallowed through you'd get a spirl patterin apearing. as if this was one section of it. Bucause it appears every were else in nature.
As, with the WM cell, it is a three demensional V, from bottom to top and from slide to slide. This means the electric field is decreasing upward and from smallest side to greatest side at same time. It must be causing the dipole moments to "spin" the water before separation.
Greate jog as usual John. After seeing this video, I am believing more that the change in electric field from bottom to top is the real key. This is because of the V pattern.
Hi John. What is the purpose of testing at 24 and 36 volts?
Also, I couldn't tell from the video, but does this modified Aaron cell put out as much as the WM?
nategreg 4 years ago
These are tests to see how to produce more Hydrogen. I also believe that the "Myer" thing can be done without the "lights". Thanks for your question... John AArons
johnaarons 4 years ago
John:
Can you tell me how many cu ft of hydrogen gas per min. you expect to need for your Honda to run at 50 mph on hydrogen only? What is your cell producing now at how many amps and volts? Thanks!! Bobbypatty1
bobbypatty1 4 years ago
Not at this time...John AArons
johnaarons 4 years ago
Hi john have you try just the plate and filter paper and a plate with just the filter paper Width on the plates lot of hho gas it's a bit like my water capacitor works well
Keep up the good work
Mrxcell42 4 years ago
My first video "1" used a screen (plastic) from a door, and I wrapped it around a stainless steel rod... Check it out.. John AAron
johnaarons 4 years ago
Hay john. very nice. on this cell i noticed had a bit cut off the bottem of it probabily nothing. also i think if the plates were curved ever so slighty you'd get even more and if that curve was fallowed through you'd get a spirl patterin apearing. as if this was one section of it. Bucause it appears every were else in nature.
killianv2 4 years ago
Interesting... John AArons
johnaarons 4 years ago
there is a ph meater i use in the oil field to test the ph in the drilling mud this will beable to check and see how much koh you have in the water
CHARLESBW 4 years ago
As, with the WM cell, it is a three demensional V, from bottom to top and from slide to slide. This means the electric field is decreasing upward and from smallest side to greatest side at same time. It must be causing the dipole moments to "spin" the water before separation.
williajl1 4 years ago
Greate jog as usual John. After seeing this video, I am believing more that the change in electric field from bottom to top is the real key. This is because of the V pattern.
williajl1 4 years ago
Hello John,Great work.Keep it up
czarwright 4 years ago
Thanks... John AArons
johnaarons 4 years ago