Origami shuriken

[willccb1]

fica meia hora só alisando o papela, avá...

[happychappyflappy]

great vid but next time... get on with it

u spend like 20 seconds just folding it in half

[2bpilot1]

That is a really nice knife

[limoncello182]

check out mine and leave comments!!!

watch?v=FeZngm-kkr0

[Tuskengod]

Again with the assholes, I'm REALLY tempted to start ignoring my principles due to assholes.

[Tuskengod]

Had you read the comments, you would've known that this video was made on a whim and as such, I did not have scissors available to me at the time (believe it or not, not all people really need scissors in their daily lives)

[elboberto7]

hey he did this wrong check out my video

[Tuskengod]

I'd delete this comment for being extremely offensive and non-constructive, but I do not believe in censorship, so enjoy your freedom of speech, asshole.

[Tuskengod]

Oh yes, and the "video response" needed to be approved by me for some stupid reason. I did, because I don't believe people should be silenced.

God, I sound like such a prick.

Whatever, this is something I feel extremely strongly about.

[luanmensan]

Eu aprendi ano passado como faz... curti demais ficar jogando na cabeça dos CDF'S

[madakitty16]

cool..thx for this XD

[exsistance11]

Nice video thax i learnt it another way but it was a complicated way this is sooo much easyer THaX!

[DaRkStArWTF]

i used to make a bunch of these 5 years ago :)

[privatetest175467]

What is of square?

[privatetest175467]

I mean what size of square?

[Tuskengod]

Any size. The size of the square dictates how large the shuriken will be, mine was the size of a cat's anus, but if you check out my other videos, you can see that they can be made large as well.

[kmplaya93]

Sorry to be a little condescending, but that video is um.. how you say, weak in terms of quality and explanation.

Sorry for my broken English I'm not American

[Tuskengod]

Neither am I, even though my profile might say otherwise, it's not like I'm going to give out my personal details on a site full of morons.

Anyway, yeah, the quality is sucky, as it was taken with a 10 € webcam, but I think the explanation is rather clear... At least my friends were able to do it with those instructions alone, if there's something that's unclear to you, try asking, I will at least attempt to help you.

[kmplaya93]

okay.. on the part right about 6 minutes when you showed the two individual pieces connecting i dont quite seem to see how you are actually doing it.

[Tuskengod]

There should be this little slit on the backside of each piece, and a little triangular bit on the front side, we're assuming the side with the triangular bits sticking out of it to be the front side.

You need to stick those triangular bits into the slits on the backside of the other piece.

[ninjafan15]

confusing when i tried it my protruding flaps werent long enough to make triangle why?

[Tuskengod]

Make sure you were using a square piece of paper.

[ninjafan15]

oh okay i found out why i wasnt vally folding twice thank you though.

[liceysta01]

i dont liked

[ParkourSNKM]

this sucks...origami is for faggots.go get a life

[Tuskengod]

... said the man with parkour in his name.

You're just a waste of money for the public health system. "Get a life", as it were.

[Tuskengod]

Also, looking into your so much superior "life" has revealed a shocking truth: You have none, therefore you have no right to bitch at other people for their lack thereof.

You've joined on 7.12.07, since then you've watched 281 videos. That makes 55 days today, that's a bit over five videos a day. Let's assume they're around ten minutes long, you're spending a little less than an hour a day just watching videos on Youtube. But of course, now you're going to tell me math is for gays.

[mellowmaromi1]

Lol tuskengod! Agreed.

[leodime]

What can I say? YouTube is addictive. :)

[candles1234567]

Impossible... A bundle of sticks cannot fold paper. Well, as far as I know... :-/

[Narutovsitachi500]

Naifu....(japanese for knife)

ME WANT TOUCHY.

[Tuskengod]

dame

watashi no naifu wa watashi no mono

My Japanese is a bit rusty though. So don't shoot me if that's not entirely correct. :P

[japanfangirl]

i konw that says something about "my knife" but the rest is all a bunch of blur

[finazen]

"My Knife is mine"

[amyofyams]

i meet bread smarter than u =]

[Tuskengod]

Do you do that on a regular basis, as in, you hang out with bread that is smarter than the letter u?

What an odd way to spend one's time.

[Narutovsitachi500]

Finally found someone else on Youtube who uses proper grammar. Sooo.... YAY I'm not the only one! :D

[TenzingRabsang]

if u dont get this go 2 my page i made a betta 1

[Tuskengod]

While I'm tempted to remove this comment right away for your horrible spelling and arrogant attitude, I'm going to let it stay so that I can laugh at it later.

[Tuskengod]

Also, I suck at not being a hypocrite. Sorry about that. :P

[Sugargoober]

:p Might as well spam the comment bro

[vundam]

mine sort of went wrong =/

[epicflailguy]

this tutorial sucks and is wrong. who the hell makes 1/2 inch shurikens? the real way is done with a single piece of looseleaf paper. gtfo my internets, you fail.

[Tuskengod]

Bah, check my other videos assfag.

Who said you HAD to make it the size of a cat's anus?

[Tuskengod]

Also, you can make these from looseleaf paper, the process is just slightly different and less accurate, but the size is just right for throwing.

[SeattleWaltz]

i cant tuck it in

help it makes no sense.

*cries* *throws the crumpled up paper in garbage*

[haha045]

Recycle!

[SeattleWaltz]

wat does lmao mean? i wanna no.

[Tuskengod]

lmao means nothing. LMAO, however, is an acronym that stands for Laughing My Ass Off.

Also about the tucking, if at first you don't succeed, make it bigger and more precise, the bigger and more precise it is the easier it is.

[zUchihaCloudz]

Lol before I saw the reply I wanted to be evil and say: "LMAO you don't know what lmao means"

[ardeppai]

lol great vid with good instructions :P

it r good :)

[Tuskengod]

You confuse me with your ambiguous messages.

[b4lth4z4r]

you confuse me with ur big words :P lol

i r good:)

[carlosfamliy565]

i can make a small shuriken and a big shuriken really good

[hollistri]

how do you make the trangle

[Tuskengod]

The triangle?

[DarthExitus]

i cant do it

[Narutoguy89]

yay i got it to work on this vid the other vid i got lost on where to tuck in

[Tuskengod]

Huzzah for you.

[amin123amin]

lol im tempted to this with my quarter grades =P

i got 3.5 ro my gpa ^^

[soravsmario]

ty flies better wit oragami paper :p

lol

[noooo000]

haha wow, cutting part far more dramatic then it needed to be, but otherwise cool, i got it.

[Tuskengod]

Sorry, I failed at the cutting part.

I couldn't find scissors. ;(

[meshach0505]

this was hard i had 2 luk really close at the end but thanks anyway

[Watcher325]

I can't do the end because it's not magnified close enough -_-"

[Tuskengod]

Tuck the corners into the slits.

Just kind of slide it in there, it's tricky when done for the first time.

[Watcher325]

ok thanks, i finally got it after a few tries. kinda tricky because my shuriken turned out small :P

Thanks

[l3iach]

k i dont un der stand the slits part like where are they please help

[Tuskengod]

Try making it from a bigger piece of paper so the slits become easier to see.

[l3iach]

ok thx ima try that

[Lorisad]

does it even fly ??? :/

[Tuskengod]

If made from cardboard/heavy paper, yes.

Besides, why would it need to? It's an ornament.

[jimmypagerulz1]

awsome! i made like 10

[Tuskengod]

Heh, I once made one with a 50cm diameter.

And another with 25cm or so, out of cardboard, it flew really well.

The 50 cm one is way too floppy for throwing.

[blazing619]

do you guys know how to make sorta like a ninja star but its bigger and it transforms from a chakram (eight sided throwing weapon that supose to look like a circle) to a big star (sorta like a shuriken or ninja star but instead of 4 sharp tip, it has 8) if you do pls tell me and if you have any questions pls reply to this comment/message

[Tuskengod]

I think I saw an origami model for one somewhere... But it was fucking hard to make and I don't think it expanded when thrown.

[Ashanmaril]

small shiriken. I made a bunch and 1 giant 1

[megamandjk]

ur the best i watched all the other 1s and urs is the only 1 i could make thanx!!!! :D

[Tuskengod]

Glad you liked it.

[syllrahc]

Parabéns ;D

Ótimo video!

Que Deus esteje sempre abençoando você, abençoando sua familia e abençoando tudo por ae ;D

[carrots998]

Sweet. I could never make one of these until now. thanks 4 making the tutorial.

[iwrestler10247]

fuck this! i cant get this bul shit!

[Jesuvius]

I can't get a clear view on what you're doing around 6.34

[Tuskengod]

Just reinforcing the fold on the piece.

[summerlove323]

That was the easiest origami thing I have EVER made!

[helivestubes]

We made these in highschool and called them chinese stars. We use to throw them at each other,lol

Search yahoo groups for Paper_Models and find thousands of FREE models and theres no catch! Its my group,lol I would love for you to share your models with us! There are over 1000 members! Enjoy!

Helives! aka FROG

[Tuskengod]

Quite nice. I'll check your site out at some point.

[goldmetaman]

ha. that was cool. orgami is so hard, but it seemed easy when you did it.

[xXAssasinX]

you either have way too much time on your hands, are really, REALLY, bored, or lost a bet, i doubt the latter but either way, i now know how to make a origami shuriken and i thank you!!! ive been trying to figure out how to do it for awhile but never knew how, and i never thought about looking it up on youtube haha

[Tuskengod]

Heh, it's the first option, also a part of doing it was that I had just gotten some video editing software and I wanted to try it out.

Glad you enjoyed the tutorial though.

[rh117]

Good tutorial i dont see how it sucks

[Balesz36]

cool

[jimbolimbozeldafan]

Long time to make shirken :( *kills self with it*

[evaluu]

.....***Ill just be comentless so that mr bossy wont criticize me***** and by the way, dont you ever insult a narutard.

[AnujitKeya]

whad d hell you think u r?

[Tuskengod]

I think I'm someone making a tutorial video on Youtube.

If my way of replying to comments I deem idiotic (such as this one) offends you, you can kindly go put your hand in a blender.

Or you could, you know, learn how to spell, but that's a bit much to ask, I admit.

[kongdancer]

ty for posting

[goth321]

this sucks

[Tuskengod]

I wonder who here is the one who sucks little miss narutard. ;)

[CodiYawn]

shutup

[Tuskengod]

You know, there's a space between shut and up. Just thought you would like to know. ;)

[TravelerKM]

Thanks for the helpful instructions!

[SpeedSword]

arigato gozaimashita for refreshing me on how to do that (I needed a refresher x3)

[xgunboundxx]

wheres the scissors!!

[Tuskengod]

Eaten by a llama. D:

[machineman9]

damn just use scissors to cut! nice vid though

[Tuskengod]

I couldn't find any scissors, which is why I used the knife. Also thanks.

[mattdot666]

Thank you very much, worked perfectly.

[Bionuker]

110 seconds to cut a piece of paper in half..

[Tuskengod]

If you prefer doing it quickly, that is your problem.

I prefer my folds and cuts to be precise.

[Bionuker]

It's a good tutorial, but the cutting in half was pretty time consuming.. You can admit that.

[seanpg95]

it help alot that if when you rip the paper lick the the fold just enough to get it a little damp to make it less difacult to rip

[riceboi2009]

Very good i felt the beginning might have been a bit overdone but other than that i felt it was extremely easy to follow

[pendraidos]

At the beginnig i was thinking to tell you that people aren't stupid cause you take a lot of time explaining how to fold the paper step by step but not after taking a look of all the comments I think people are stupid... Its an easy trick and you explained it very well but almost the 60% of the comments are like that: 'i tried it but it was hard' or things like that...

Why people cant do that?

They have hands or branches?

*Sorry about my english! I'm spanish from Spain, Europe

[CrazyCee18]

Thanks people were not Explaning it good

[demonbleach261]

sick knife

[cookiethousand]

omg a knife!

[ChibiRikuWiku]

but it didnt go so well throwing the foil shuriken

[Tuskengod]

Shame.

[ChibiRikuWiku]

lol i can make it out of foil. you take to long folding it :p

[dude207sweet]

i tried out of tin foil and it sucked

[hoobastank1]

i tried it but it was hard.

[monster1221]

i wonder how well it would work with aluminum paper.

[Mortrimor]

sweet! i'm gonna make a bunch of those =D

[KarlOhlsson]

prety cool but you might be to pedantic when you fold the sqaer with a straightedge.

[slinkyman24]

this is great lol

[hyrushu]

if u throw it would it work?? =/

[Tuskengod]

Well if you make it from some strong paper, it flies pretty well.

[hoyt596]

i cant find the flaps your hand was covering it

[videokid786]

add music next time

[Tuskengod]

Why? Can't you put music playing on the background?

I mean, it's just simply a waste of bandwidth to include audio in a tutorial that doesn't have anything to do with audio.

[videokid786]

well it gets boring

[lukepevensie]

i can fold an f-18 hornet based on frog base

[Tuskengod]

Oh? Mind making a video of it, or do you have a link to the instructions? That souns pretty cool.

[lukepevensie]

i invented the model 2 years ago

[Tuskengod]

Oh? Quite nicely done.

[ilikepie456]

great tutuorial it took me a cuple tries but i got it

[Tuskengod]

Thanks, glad you got it.

[Fumaki2]

And does it fly?(the shuriken, not the knife^^)

[Tuskengod]

If you throw it well, it will fly pretty well.

If you make a bigger one or one out of cardboard, it flies extremely well though.

[ochiwa]

whats the name of that knife?

[Tuskengod]

I do not know, I got it from some market.

[zeromanthebest]

hey slow down when you put together those 2 pieces

[Tuskengod]

I meant it to be paused every now and then.

But yeah, you've got a valid point, it could be a bit slower.

[XxPharaohAtemxX]

what program did u use to make this video?

[Tuskengod]

Vegas Video 7.0 trial version and Virtualdub for the encoding, I used the DivX codec.

[XeonLeoson]

Love it Maza. Ill get my response up soon enough.

Its the "Noobs guild to being a Ninja!"