How to Make: The Atomizer 1.0

[cipriuss]

This is the first time I found out the best way to cut a soda can, Thanks for the video

[Locerbus]

I like it, but atomizer is also a common name for a refillable spray bottle.

[96steelman]

and is there any subsititute for JB weld?

[96steelman]

do i have to use the circle thing to punch the holes? and if i dont, will the effecientcy of the atomizer decrease at all?

[delusionaldiminutive]

This is fantastic. Definitely considering trying this out. You're incredibly bright. I see good things in your future kid :)

[bulletproof2353]

so is there any fiberglass inside of it? and what is jb weld? and does it work with regular rubbing alcohol ? or do you have to use heet?

[bulletproof2353]

so is there any fiberglass inside of it? and what is jb weld?

[Crunchieman]

does it work?

[soldier715]

Would adding fiberglass insulation inside of the stove like many other alcohol stoves possibly improve the design?

[kinstar]

Lol i love how hes like ''your going to slowly drill the centre hole out'' that was bare fast to me lol

[Battleworks]

Nice how-to vid. Well done.

[dogfootrot189]

@TehNumberOneTroll don't be a presumptuous jackass, have a little consideration for others.

[alexkyx12341]

that was impressive young man. I had no interest in making an atomizer. It was an accidental click. But i ended up watching the whole thing. Very nice video. 5 stars

[savagefury69]

@alexkyx12341 Same here, i was looking for electronic cigarette atomizer but im actually going camping next week and this looks awesome!

[alexkyx12341]

@savagefury69 yeah thats exactly what i was looking for. Lol. I just got my totally wicked tornado man. Its the best e cig ive ever used. Just an fyi.

[savagefury69]

@alexkyx12341 Yeh i had that one, then i got the 6v Xhaler from Nhaler.com, best thing ive ever had battery last for bout 2 days

[c0d3x5]

@alexkyx12341

i got the titan 510 form totallywicked.. love it .. happy vaping lol

[alexkyx12341]

@c0d3x5 Good choice. Was that your first e cig kit?

[c0d3x5]

@alexkyx12341

yes.. after doing some research on a lot of others, i finally decided on the titan..

[alexkyx12341]

@c0d3x5 right on. didu get a PCC with it? cuz i heard the battery life is kind of short. Well at least compared to the tornado anyways.

[keystoneclimber]

Nice Job. I'm not one of those crazy safety nut's telling you how to work around sharp objects. That being said, I wanted to make sure you are aware that there is an explosion risk inherent with the pressurized alcohol can stoves that is not present in all of the other can stove designs. It has to do with forgetting to install the fill port screw before priming and igniting the interior vapors before pressurization. Not trying to dissuade you from experimenting, just be aware of the risks.

[broli123]

Good job, but use gloves!

[Armstrong202]

i made one!!!

[DennyAJD]

Nice, very smart! But please keep your finger safe. it's lots of sharp edges :)

[Armstrong202]

u shood put cotton balls in it

[qwertyboy1234567899]

@Armstrong202

That was not part of the design I made.

[Glassblower718]

good job !!!

[eda777kradenaipe]

I recommend that you use hot water in the passage of a larger piece because the force is broken can, besides making it cools as it is real and fair to the other.

sorry if I do not understand but I do not speak English, I am using a translator xD

[sraike]

Very good video! 

[r1273m]

Very good video but I wish you would pay more attention to personal safety. Using a Stanley blade without a proper handle and pushing an awl into the centre of the can with your hand 20mm behind just made me cringe!

[olioliio]

you are smart... very nice!

[fuelban]

cool video, thanks.

thom

[zekun4]

there should be a innner wall ...were is it ?

[qwertyboy1234567899]

@zekun4

not in this design there isn't

[domyaska]

excellent ! great job ! bravo !!! thanks for sharing!

[r0adkill24]

"take one of your cans"...and make sure the other one falls to the floor!!! LOL just kidding, great vid bud

[thecousin]

what fule do u use for this thing?

[thecousin]

This is not as simple to make as it seems,altough it aint too hard. I just made one, will send you a vid of it once the stuff finishes drying.

[qwertyboy1234567899]

Thanks everyone for the great comments!

XD

[legox50]

i thought the jets was suppost to be in the depression...... like the atomic stove so there is more heat going to the pot...

[qwertyboy1234567899]

Not for this stove. I designed it to have the jets on the outside.

[srcstc]

You're a smart kid!

[Gtacrazz213]

i will make the video of that the Philippine version much cooler that that we have the same atomizer but it has much more difference we have upgraded ours so wait till i finish my vid but yours is cool to so i will rate you 5 stars....

[primeraprim]

smart kid !!

[VaperSteve1975]

Awesome video! Better then anything I have seen from any adult out there! Keep up the good work!

[tob9595]

Well done.

I have NOT seen a better HOW TO vid presentation...

As said before

YA GOT TALENT KID

[CurrentlyDisconected]

excellent vid man great piece of information to know

[heycolslaw]

Ya got talent kid/ more power to you!

[joaorp]

and what if i like cola? hum?????.... lol

[militaryson94]

That is probabally the Best alcohol stove ive ever seen, I am definately making this when i get the time cause all of my other stoves never worked except 1 but.. anyway good jog and Thanks for the great vid!!!

[josluiss]

very smart boy

[alejandroengineer]

that design is very clever and smart!

[toad773]

@alejandroengineer it isn't actually his design

[icychap]

You've really made an excellent how-to video.  Thanks for sharing!

[djstern1]

Young man. A very nice job of presenting a how to video.

[atomicstoves]

thank you!

[SanSuMartialArts]

@djstern1 best demo yet thanks alot 

[kinstar]

@djstern1 ahhh Ahhh very smart boy indeed i would never have though of using the blade and resting it agaist the piece of would lol would av got the scisscors out lol

[zip1212]

it was a very good project and instructions. the problem i have is i need to see it working ? or doing whatever it is its supposed to do. ? sorry if i missed something

[fuelityourself]

Thanks! Cool instructions and nicely explained.

[BushCraftOutdoors]

do u pore the alchol in the hole where you drilled. and do you need that screw for anything besides putting it in there like do u have to use it. thanks 10/5 lol

[AUGRE12345]

The screw is not neccessary, But Is a nice touch.

[iceknite5]

at AUGRE12345

umm yes it is his design is called a pressured jet stove closing the valve with the screw allows for more pressure which means more heat and more flamage.

[AUGRE12345]

Thats true, In order for it to be the atomizer. But It will still work without it.

[iceknite5]

oh really now jet of flame will come out of the hole if you talke the stove off

[AUGRE12345]

Big deal. If you can't figure out to keep your hand clear, you probably shouldn't be using flammable liquids. And, with the pressure released the flame isn't that big.

[ANDIO33]

Good instructions, thanks!

[86thmountmerrion]

Cool stove but if you're ever running low on jb weld you can put the 20mm bottom part inside the 30mm piece.The stove will be more fragile but will still work but if you put the 20mm piece on the outside of the 30mm piece without jb weld capillary action will push fuel out the seam and you will have a big fiery mess......lol!!!

Well done 5/5