great router table

[Assimilate71]

Lot of good tips. Thanks.

[Den0Q]

I'm sorry are you saying z track, p track, or c track? Also where can you buy this track? Thank you I'm a new subscriber and enjoying your videos very much.

[jerryiscountry185]

@Den0Q t track



[putative3]

Good video, full of really useful info!

[mangodishim1]

@woodworkbyjw is really showing signs of great American craftsmanship. Great .com

[rthefish]

Excellent Vid. Thanks.

[dubsaloon]

I built mine tall, I just need to cut the hole and then. WOW I have a Shop smith Miter thingy. and I bought some of the 3/4" and I have 3 sets of smaller track for the fence.. Miter works great for the end grain for creating door frames. Sweet I'm just and few processes away from a working router table. Thanks for sharing this information.

[ea32da32]

Nice job. Great tips.

[NyckBossBz]

thanks!!!!!

[jedicazador]

Thanks for sharing your knowledge

[bchahn1950]

Nice layout. Having problems finding a z-track rod for the fence mount. Anyone have a location to purchase this item?

[lcharron1]

Awesome video Thanks for the tips!

[stevendonovan1987]

excellent video, thanks for the information

[dlmarti]

You're happy with that height?

I'm designing my first now, I was really thinking of going much taller.

[Fentanyl3]

@dlmarti If you measure the table on most floor mounted equip, it'll be 34 inches high. 34-36 inches is pretty much the most comfortable height for most all machines. When I worked maint in the last factory, I was asked to build all the production equipment at 34 inches work height

[espiguicia]

Great video! I would love to seeit with better resolution to appreciate details.

[1kings1918]

Nicely done. I wish the resolution was a little better on the video, but this gives me some good ideas. Thanks.

[xmlnet]

Thanx a lot. I think I'll skip on that $500 table I had in my sights :)

[alexis221woodworks]

Ive been looking to upgrade my current router table and thinking check out a video I have of mine. Ide like to make some improvments...Great info Thanks

[TheYTViolation]

Great information. Very good ideas.

[dragonxtz]

very impresive !!

[IcechickenSr]

Nice you should, make some shims to fit between the outfeed side and the extrusion, so you can use your router table as a jointer. I have several shims I made, and I'll tell you what, I get Deadly results! My big old jointer would be hard pressed to do a whole lot better. It really makes the router table a whole new animal, especally for those that can't afford a jointer. Cool video's as always. Cheers, IC.

[HobbieJoe]

A source of inspiration for the practical DIY worker!

[kdaly87]

GOOD JOB

[4sineweaver2]

I tried making a 1/4" lexan baseplate to use with my router table but had a problem. My Bosh router table has a fairly large opening which was more than 1/4" Lexan could span without bending under the weight of the router. I would suggest getting 3/8" Lexan for tables just to be sure. The 1/4" works great for jig-type baseplates.

[crypstopher]

1/4" Lexan also works well for a good base mount. The material is easy to work with and you can make several different bases for various uses. Nice, very informative video. It's good to see people developing their own shop tools based on prior experiences.

[ElCarisoHS]

Man, Great video I like your style.

[Vincerama]

I'm guessing the stand was from yourj Ryobi BT3000/3100 and the fence used to be the "miter track" from the BT accessory kit?

[ritter89]

Very impressive and creative design! Thanks for the thorough and detailed instructions. I'm gonna try this one.

[eastmids10]

that's just the type of ideas I was looking for.

great clip

Thanks

[cwd60tx]

thank you for the great ideas I"m make one the weekend on the same table my dovetail jig is mounted on cwd60tx@yahoo

[tonyshit80]

poor video,...however thanks to poster

[Nudelsalatbomber]

tonishit, you name is the programm, right?typical idiot!you leave bad comment´s and if someone want´s to checkout your video - NOTHING there to check out!so do everybody a favor and inhalate your gas and try to not whoop your self!

[tonyshit80]

What did you mean..? My gas so powerfull

[agnesJMJ6]

Do you have plans you can sharfe? Txs

[zapatista512]

Great video, good router table system. thanks

[clshcaz]

Where can I get the track material?

[4sineweaver2]

Thanks for making this video. You really got me thinking about using marble...

[tH0d0RHs]

great video. well done sir!

[plainoldjason]

Great video. I love "If it doesn't look smart, it prolly isn't"!

[blip789]

Good video with lots of advise. I like the use of a marble slab..flat, doesn't distort. Engineers use granite tables for making out and measuring for the same reasons.

Thanks.

[flynch55]

Thanks for doing this great video. Very resourceful.

[johnvile]

no sure my last message worked. so here it is again. rather than use a tile (could shatter) you could try using a "Plasterer's Hawk", in the main there aluminum and very cheap. let me know what you think. is that a good idea?

[jdn6863]

that may work if the hawk is stiff enough. my own hawk is too thin of material and would deflect with the weight of the router-good luck

[vdobrovo]

thank you very much, I am just thinking of buying a good router table, but they don't come cheap; Your great ideas encouraged me to try build my own table.

[oldpython]

Sir you should write a book. You have the best information I have seen and I have been a woodworker for over 40 years. I will proud to be your first book signing customer. Write that book before all your knew ideas show up in Rockler!

[bobbyfmax]

great work. simple no nonsense approach and very effective. thanx

[nicetattoostupid]

Very well thought out system. I'm going to build my own and I will definately be using some of your ideas. Thank you.

[jahhmin]

Great video