lol not dissing mach 1's at all bro because i love them but my 08 gt beat a badass mach not to long ago that had the same mods as my 08 did sct tuner, o/r midpipe, catback, cai, stock wheels, manual my stang has superchips, frpp stingers axleback, o/r x at the time, k&N cold air intake, hurst short throw shifter, stock 18" bullits that guy who was in the gt didnt know how to drive very good lol not trying to be a dick at all
How much of a step? I have a bolt on GT making really good numbers (268/310) I really would love a Mach 1 but the money could get me a C5 Corvette. I'm struggling on what to get lol
well my full bolt on 04 GT (LT's, full exhaust, full intake, gears, canned tune, etc) made 254/300..on that same dyno, my mach made 295/317 with only a air filter and borla catback. this mach would stomp the shit outta my old GT.
I guess another reason is because the Mach stays in its power band longer since it revs to 7k. I just need to drive a full bolt on Mach or 99-01 Cobra to understand.
@nevermissclancom a stock or mostly stock mach loses its power band about 6600 to be honest but yeah you do need to drive a full bolt on mach to understand i can spin 315 tires nearly thru 3rd gear
@Storm7289 Yeah on bottom end they can. Up top however the C5 will begin to walk. I bought an LS2 GTO however and can walk both cars now :) I love a Mach 1 however. I feel most people under rate them.
@nevermissclancom well obviously but who cares if you can walk someone after 15-20 seconds of racing. the guy who held the lead for that long is the winner in my books. ls2 gto's run low 13's so i doubt it would be a walk
@Storm7289 I'm seeing more in the mid to high 12's. I get into more roll races than stoplight races so I decided to go that route. I love Mach 1's however.
lol not dissing mach 1's at all bro because i love them but my 08 gt beat a badass mach not to long ago that had the same mods as my 08 did sct tuner, o/r midpipe, catback, cai, stock wheels, manual my stang has superchips, frpp stingers axleback, o/r x at the time, k&N cold air intake, hurst short throw shifter, stock 18" bullits that guy who was in the gt didnt know how to drive very good lol not trying to be a dick at all
bseidle 8 months ago
i love my 03 mach 1 <3
hacks4facts 1 year ago 3
wait was that retard actually proposing to put a 350 chevy in a mach1? leave that crap in the impalas with 26" wheels moron.
knucklehead0202 1 year ago
Awesome car man. I've got a 97 Cobra. Love the 4v motors.
zackomac 1 year ago
Mexican Driver Mod, LOL, that must be why he lost.
crakpotjoe 2 years ago
mach `1 baby U DIGG
al9a3qa 2 years ago
nice car man i am in the process of buying my own 2003 mach 1
V8BOSS1989 3 years ago 3
thanks man...ive had it for about 3 months and its a definite step up to my old fully bolted on GT. .also, congrats on the purchase.
enorbit3 3 years ago
well it will be a step up for me to i am driving a 1979 z28 right now and its to slow for my taste
V8BOSS1989 3 years ago
Save the money you'll spend on the Mach 1, drop in a nicely built 350 for a couple thousand, and you'll stomp all over a Mach 1... Just sayin'
plasmeh 2 years ago
true i know right now i am redoing the z cause the ppl i bought it from put it together like crap and it was falling apart
so i was just looking for another car while i work on the z
V8BOSS1989 2 years ago
How much of a step? I have a bolt on GT making really good numbers (268/310) I really would love a Mach 1 but the money could get me a C5 Corvette. I'm struggling on what to get lol
nevermissclancom 2 years ago
well my full bolt on 04 GT (LT's, full exhaust, full intake, gears, canned tune, etc) made 254/300..on that same dyno, my mach made 295/317 with only a air filter and borla catback. this mach would stomp the shit outta my old GT.
enorbit3 2 years ago
I guess another reason is because the Mach stays in its power band longer since it revs to 7k. I just need to drive a full bolt on Mach or 99-01 Cobra to understand.
nevermissclancom 2 years ago
yup i agree. the 4V motors can rev a bit higher. if u were in L.A. i would offer u a ride.
enorbit3 2 years ago
lol well North Carolina is a little bit aways haha
nevermissclancom 2 years ago
@enorbit3 Im in Long Beach lol shit take me for a spin in that bitch....my buddy Miguel used to have an '03 Mach...that shit was so torquey...
bradlyw420 1 year ago
@enorbit3
fags lol
xbuck1keekx 1 year ago
@enorbit3 im in lynwood by compton..where in LA you at..tryna find peeps to cruise wit
NAJEE52 11 months ago
@NAJEE52 same here i'm from Orange and am looking for a mustang club/buddies. Check out my 2005 GT
ralatorre9 5 months ago
@nevermissclancom a stock or mostly stock mach loses its power band about 6600 to be honest but yeah you do need to drive a full bolt on mach to understand i can spin 315 tires nearly thru 3rd gear
1badmach103 1 year ago
@1badmach103 I'm sure on very bottom end I would be close to one but I bet 2nd and 3rd gear in a Mach is impressive.
nevermissclancom 1 year ago
@nevermissclancom a geared bolton mach will walk a c5 vette ive witnessed it many a time
Storm7289 5 days ago
@Storm7289 Yeah on bottom end they can. Up top however the C5 will begin to walk. I bought an LS2 GTO however and can walk both cars now :) I love a Mach 1 however. I feel most people under rate them.
nevermissclancom 5 days ago
@nevermissclancom well obviously but who cares if you can walk someone after 15-20 seconds of racing. the guy who held the lead for that long is the winner in my books. ls2 gto's run low 13's so i doubt it would be a walk
Storm7289 5 days ago
@Storm7289 I'm seeing more in the mid to high 12's. I get into more roll races than stoplight races so I decided to go that route. I love Mach 1's however.
nevermissclancom 5 days ago
@nevermissclancom mid 12's stock? nowayyyy man i bet you can maybe get high 12's stock but otherwise boltons
Storm7289 5 days ago