How to make a fiberglass corner box

[steven10462]

damn man how much you think it will cost to do dat???

[Revilingfool]

gloves and respirator are your friends...

[RoShAnOWNEDyou]

Great job!

[1BlubeTube]

Nice Job.

[1BlubeTube]

Thanks for showing how to use fiberglass, were do you get that stuff?

[KerrankiSuomee]

MUSIC????



[prheadfrankie]

passion beauty stuff

[archerlondon1414]

very nice ....nicely made mate 

[badboysergio]

What do you do to put the wire threw the back off the sub box do u make a hole for the wire to go threw then do u need to fill the hole?

[Mjbabycakes7072]

@badboysergio Either use a terminal cup....nice if you want to remove the enclosure and reinstall.... or drill a hole pop the wire through and silicone the hole shut.

[March94Hare]

Where do you buy the carpet? I'm looking to make something like that.

[SirDoomTheGreat]

Going to install a box like this in my Kia Forte with a Qauntum audio 12.

[bigA2tall]

skipped a few steps there cuzz like the whole "How to make a fiberglass corner box " part. Ghetto!!!

[loslabs]

@bigA2tall

Maybe you should watch the whole video at the website like instructed.

[biotch100]

@loslabs lol got him

[runescapeisawsomeful]

finaly one that acctualy works instead of just paying ppl to do it for them.

[audiocable]

i have the same car!

[loslabs]

@audiocable Thanks so much. You should order one. They are only 100 bucks

[audiocable]

@loslabs ye usually i order stuff, but i love molding and making stuff myself, im going to try to make this myself lol, i will probably end up wasting 300 bucks, but satisfaction of doing it myself is priceless lol

[kevin10r]

damn i love that the sub is flush with the car great job man

[loslabs]

@kevin10r Thank you so much. 

[TheEvilOne343]

very nice video!!

[supertommy33]

this is an audi a4! i have one and said hey that looks like my audi! :)

[themga4life]

Where can I fetch this stuff? I'm from Netherlands who can help me

[arthurrobles]

He Doesn't Show You The Main Part the back and Its Called A How To Not What You Can Do.

[loslabs]

The reason the back of the box is "white" is because it;s primed. I was going to paint the the box originally. It does not effect the box one way or the other. If you follow the steps, your fiberglass should fit perfectly. The back of it is purely cosmetic and serves no purpose other than that. No one will ever see it unless it's uninstalled.

[buffitup1]

@arthurrobles You should learn to read. Go to the WEB SITE AND WATCH THE VEDIO AS INSTRUCTED. moran

[Schaake100]

@buffitup1 YOU SHOULD LEARN HOW TO SPELL

[SDCalifornia1]

What Is the In 0:26 and wer can i ger ? Plz

[DonaldEHS]

@SDCalifornia1 Its called fiberglass mat and you can get it inan 8 sq. ft. bondo kit at your local autozone advanced auto or orielly's

[SDCalifornia1]

@DonaldEHS The Don't Have Fiberglass

[DonaldEHS]

@SDCalifornia1 Do you perhaps have a mrina near your location? this fiberglass resin would be freshest anyways. It should be decently cheap i get 8sp ft kit for $20, and Just 8 sqft of mat for $5

[1JasonMraz]

mad clean install......need i say more

[lemon48794879]

amazing quality, i have always liked custom enclosures that "fit in" with your cars enterior

[loslabs]

@lemon48794879

Thank you very much!

[chrisdalacker88]

hey man i wanna make a custom sub box for my cobalt and wanted to do two corner boxes would it be better to make them removable or bond them right to the car and if i make them removable how do i fasten it so it doesnt move around/rattle or whatever??? any help would be greatly appreciated

[SatansSpatula]

Wear some gloves! Fiberglass is nasty. You'll be fine for years, then *bam* allergic.

[mercman0071]

Well... My project is complete, thanks to this very informative video. I did get fustrated near the end and I skipped the bondo step though. Hope it doesn't hurt anything. Very well worth the $10 to see the entire video.

[mercman0071]

What did you do to the back of the box to get it white? You sanded it but it still had a redish tint then the video cut to you cutting mdf but the back of the box was white.

[TheLolnoobs]

Thats nice.

[mercman0071]

WOW! This video is very informative. The only down side is that sometimes the video was sped up and I don't know if I missed any important information. Even with that said. I give it a 10 out of 10. $10 well spen for an 88 min video. Hell, I caould build a box like that for someone and get ten times what the video cost. Wish I had a fiberglass chop gun though. That was tight.

[jonwhunt]

Someone please tell me how to calculate the volume for custom shaped sub enclosures! I've just been doing boxes as a hobby but now I have people asking me to do custom REALLY weird shaped boxes and trying to tell them which sub would work best in the box volume created. If that makes sense lol. Would be great if there was a device that could figure it out somehow =(

[buffitup1]

@jonwhunt not so hard. take the sides that form a square or rectangle and calculate those first then take the parts that are round and calculate those. example, say you have somthing like a dome on the side. that would b a half of a sphere. so add that to what ever the square comes to. the formulae can be found in any math book or just google it. basically you have to devide the box into all the different shapes, calculate them separetely and then add them to get total volume. hope that helps

[GEARHEADGUY92]

thats going to sound like shit if its not calculated

[pricooolnas]

Can you write pm, what I need to make just like it?

[LiveLoudCustoms]

i got a question can i get a link for the type of cloth you stretched and used the clips and adheasive to put on

[LiveLoudCustoms]

ordered the full vid helped allot im buildn a similar box not gonna lie i made a mold lock the first try on this project

[fastodie]

How much for the vid

[loslabs]

10 bucks

[fastodie]

see i would pay that for the vid but got no way to pay it online

[bercut19]

заебись

[halfmumi]

Good video.Mind my question but i didnt understand what is masking tape for?

[herosquad]

so the resin and fiberglass dont mess up the carpet

[halfmumi]

Thanks for the comment. But i didnt understand the procedure. After applying masking tape is he applying fiber on to it? regards

[herosquad]

he puts the fiberdown first then resin then once he has the design he wants he just adds on to that,

[hondrifter]

I'm sure that you are a talented car audio installer, I would rather hear what you are saying to gain some valuable info from you rather than listen to music. Just a thought.

[0VizGofCMOB7]

wats dat white shit coconut shit??

[zgir1]

Dude you are sick, every other day it is a new video for you! Your a machine

[loslabs]

full video now available at loslabs website